[PATCH v2] arm64: dts: rockchip: Enable DisplayPort for rk3588-evb2

[PATCH v2] arm64: dts: rockchip: Enable DisplayPort for rk3588-evb2

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The rk3588 evb2 board has a full size DisplayPort connector, enable
for it.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---

Changes in v2:

- Link to V1: https://lore.kernel.org/all/20250916080802.125-1-kernel@airkyi.com/
- Fix invalid DP connector type
- Add more comment about dclk_vp2 parent clock

 .../boot/dts/rockchip/rk3588-evb2-v10.dts     | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
index 91fe810d38d8..60ba6ac55b23 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
@@ -25,6 +25,18 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	dp-con {
+		compatible = "dp-connector";
+		label = "DP OUT";
+		type = "full-size";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&dp0_out_con>;
+			};
+		};
+	};
+
 	hdmi-con {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -106,6 +118,24 @@ vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
 	};
 };
 
+&dp0 {
+	pinctrl-0 = <&dp0m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&dp0_in {
+	dp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp0>;
+	};
+};
+
+&dp0_out {
+	dp0_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	sram-supply = <&vdd_gpu_mem_s0>;
@@ -916,6 +946,17 @@ &usb_host1_xhci {
 };
 
 &vop {
+	/*
+	 * If no dedicated PLL was specified, the GPLL would be automatically
+	 * assigned as the PLL source for dclk_vop2. As the frequency of GPLL
+	 * is 1188 MHz, we can only get typical clock frequencies such as
+	 * 74.25MHz, 148.5MHz, 297MHz, 594MHz.
+	 *
+	 * So here we set the parent clock of VP2 to V0PLL so that we can get
+	 * any frequency.
+	 */
+	assigned-clocks = <&cru DCLK_VOP2_SRC>;
+	assigned-clock-parents = <&cru PLL_V0PLL>;
 	status = "okay";
 };
 
@@ -929,3 +970,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp2 {
+	vp2_out_dp0: endpoint@a {
+		reg = <ROCKCHIP_VOP2_EP_DP0>;
+		remote-endpoint = <&dp0_in_vp2>;
+	};
+};
-- 
2.49.0

Re: [PATCH v2] arm64: dts: rockchip: Enable DisplayPort for rk3588-evb2

[Quentin Schulz]

Hi Chaoyi Chen,

On 9/18/25 8:28 AM, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> 
> The rk3588 evb2 board has a full size DisplayPort connector, enable
> for it.
> 
> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> ---
> 
> Changes in v2:
> 
> - Link to V1: https://lore.kernel.org/all/20250916080802.125-1-kernel@airkyi.com/
> - Fix invalid DP connector type
> - Add more comment about dclk_vp2 parent clock
> 
>   .../boot/dts/rockchip/rk3588-evb2-v10.dts     | 48 +++++++++++++++++++
>   1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
> index 91fe810d38d8..60ba6ac55b23 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
> @@ -25,6 +25,18 @@ chosen {
>   		stdout-path = "serial2:1500000n8";
>   	};
>   
> +	dp-con {
> +		compatible = "dp-connector";
> +		label = "DP OUT";
> +		type = "full-size";
> +
> +		port {
> +			dp_con_in: endpoint {
> +				remote-endpoint = <&dp0_out_con>;
> +			};
> +		};
> +	};
> +
>   	hdmi-con {
>   		compatible = "hdmi-connector";
>   		type = "a";
> @@ -106,6 +118,24 @@ vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
>   	};
>   };
>   
> +&dp0 {
> +	pinctrl-0 = <&dp0m0_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&dp0_in {
> +	dp0_in_vp2: endpoint {
> +		remote-endpoint = <&vp2_out_dp0>;
> +	};
> +};
> +
> +&dp0_out {
> +	dp0_out_con: endpoint {
> +		remote-endpoint = <&dp_con_in>;
> +	};
> +};
> +
>   &gpu {
>   	mali-supply = <&vdd_gpu_s0>;
>   	sram-supply = <&vdd_gpu_mem_s0>;
> @@ -916,6 +946,17 @@ &usb_host1_xhci {
>   };
>   
>   &vop {
> +	/*
> +	 * If no dedicated PLL was specified, the GPLL would be automatically
> +	 * assigned as the PLL source for dclk_vop2. As the frequency of GPLL
> +	 * is 1188 MHz, we can only get typical clock frequencies such as
> +	 * 74.25MHz, 148.5MHz, 297MHz, 594MHz.
> +	 *
> +	 * So here we set the parent clock of VP2 to V0PLL so that we can get
> +	 * any frequency.
> +	 */
> +	assigned-clocks = <&cru DCLK_VOP2_SRC>;
> +	assigned-clock-parents = <&cru PLL_V0PLL>;

Are those board-specific? Considering the VOP and DP/HDMI/... 
controllers/PHYs are all internal to the SoC, would it make sense to 
have those specified in the SoC DTSI? I'm not familiar with the video 
output stack so maybe it doesn't apply here or is a bad idea, so I'm not 
actually asking for a change here, just asking a question :)

Cheers,
Quentin

Re: [PATCH v2] arm64: dts: rockchip: Enable DisplayPort for rk3588-evb2

[Chaoyi Chen]

Hi Quentin,

On 9/18/2025 6:39 PM, Quentin Schulz wrote:
> Hi Chaoyi Chen,
>
> On 9/18/25 8:28 AM, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>>
>> The rk3588 evb2 board has a full size DisplayPort connector, enable
>> for it.
>>
>> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>> ---
>>
>> Changes in v2:
>>
>> - Link to V1: https://lore.kernel.org/all/20250916080802.125-1-kernel@airkyi.com/
>> - Fix invalid DP connector type
>> - Add more comment about dclk_vp2 parent clock
>>
>>   .../boot/dts/rockchip/rk3588-evb2-v10.dts     | 48 +++++++++++++++++++
>>   1 file changed, 48 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
>> index 91fe810d38d8..60ba6ac55b23 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
>> @@ -25,6 +25,18 @@ chosen {
>>           stdout-path = "serial2:1500000n8";
>>       };
>>   +    dp-con {
>> +        compatible = "dp-connector";
>> +        label = "DP OUT";
>> +        type = "full-size";
>> +
>> +        port {
>> +            dp_con_in: endpoint {
>> +                remote-endpoint = <&dp0_out_con>;
>> +            };
>> +        };
>> +    };
>> +
>>       hdmi-con {
>>           compatible = "hdmi-connector";
>>           type = "a";
>> @@ -106,6 +118,24 @@ vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
>>       };
>>   };
>>   +&dp0 {
>> +    pinctrl-0 = <&dp0m0_pins>;
>> +    pinctrl-names = "default";
>> +    status = "okay";
>> +};
>> +
>> +&dp0_in {
>> +    dp0_in_vp2: endpoint {
>> +        remote-endpoint = <&vp2_out_dp0>;
>> +    };
>> +};
>> +
>> +&dp0_out {
>> +    dp0_out_con: endpoint {
>> +        remote-endpoint = <&dp_con_in>;
>> +    };
>> +};
>> +
>>   &gpu {
>>       mali-supply = <&vdd_gpu_s0>;
>>       sram-supply = <&vdd_gpu_mem_s0>;
>> @@ -916,6 +946,17 @@ &usb_host1_xhci {
>>   };
>>     &vop {
>> +    /*
>> +     * If no dedicated PLL was specified, the GPLL would be automatically
>> +     * assigned as the PLL source for dclk_vop2. As the frequency of GPLL
>> +     * is 1188 MHz, we can only get typical clock frequencies such as
>> +     * 74.25MHz, 148.5MHz, 297MHz, 594MHz.
>> +     *
>> +     * So here we set the parent clock of VP2 to V0PLL so that we can get
>> +     * any frequency.
>> +     */
>> +    assigned-clocks = <&cru DCLK_VOP2_SRC>;
>> +    assigned-clock-parents = <&cru PLL_V0PLL>;
>
> Are those board-specific? Considering the VOP and DP/HDMI/... controllers/PHYs are all internal to the SoC, would it make sense to have those specified in the SoC DTSI? I'm not familiar with the video output stack so maybe it doesn't apply here or is a bad idea, so I'm not actually asking for a change here, just asking a question :)

Yep, they are board-specific. Because the V0PLL may be used for non-display applications.



>
> Cheers,
> Quentin
>
>
-- 
Best,
Chaoyi

Re: [PATCH v2] arm64: dts: rockchip: Enable DisplayPort for rk3588-evb2

[Heiko Stuebner]

On Thu, 18 Sep 2025 14:28:25 +0800, Chaoyi Chen wrote:
> The rk3588 evb2 board has a full size DisplayPort connector, enable
> for it.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: Enable DisplayPort for rk3588-evb2
      commit: 134fae98cfbabb7e90b1b2d957fb374408061034

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>