[PATCH v2 3/3] arm64: dts: rockchip: Enable PCIe controller on Radxa E20C

[Yao Zi <ziyao@disroot.org>]

Radxa E20C provides one of its GbE ports through RTL8111H connected to
SoC's PCIe controller. Let's enable the controller and the PHY used by
it to allow usage of the port.

Signed-off-by: Yao Zi <ziyao@disroot.org>
---
 arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index 12eec2c1db22..b32452756155 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -171,6 +171,10 @@ vdd_logic: regulator-vdd-logic {
 	};
 };
 
+&combphy {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vdd_arm>;
 };
@@ -229,6 +233,14 @@ rgmii_phy: ethernet-phy@1 {
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pciem1_pins>;
+	reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &pinctrl {
 	ethernet {
 		gmac1_rstn_l: gmac1-rstn-l {
-- 
2.50.1