From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: devicetree@vger.kernel.org, andrew@codeconstruct.com.au,
conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
eajames@linux.ibm.com
Subject: [PATCH v6 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation
Date: Thu, 18 Sep 2025 13:03:58 -0500 [thread overview]
Message-ID: <20250918180402.199373-4-eajames@linux.ibm.com> (raw)
In-Reply-To: <20250918180402.199373-1-eajames@linux.ibm.com>
The DPS310 is a barometric pressure and temperature sensor with
an I2C interface. Remove it from trivial-devices.yaml and add its
own documentation.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
.../iio/pressure/infineon,dps310.yaml | 44 +++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 2 -
MAINTAINERS | 1 +
3 files changed, 45 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
new file mode 100644
index 0000000000000..7c0782e2a821b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon DPS310 barometric pressure and temperature sensor
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The DPS310 is a barometric pressure and temperature sensor with an I2C
+ interface.
+
+properties:
+ compatible:
+ enum:
+ - infineon,dps310
+
+ reg:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 7609acaa752d5..a72b7fabc7034 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -127,8 +127,6 @@ properties:
- ibm,cffps2
# IBM On-Chip Controller hwmon device
- ibm,p8-occ-hwmon
- # Infineon barometric pressure and temperature sensor
- - infineon,dps310
# Infineon IR36021 digital POL buck controller
- infineon,ir36021
# Infineon IRPS5401 Voltage Regulator (PMIC)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9da37c8dee69d..656eada3d6389 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12176,6 +12176,7 @@ INFINEON DPS310 Driver
M: Eddie James <eajames@linux.ibm.com>
L: linux-iio@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
F: drivers/iio/pressure/dps310.c
INFINEON PEB2466 ASoC CODEC
--
2.51.0
next prev parent reply other threads:[~2025-09-18 18:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:03 ` [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-09-18 18:03 ` [PATCH v6 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
2025-09-18 18:03 ` Eddie James [this message]
2025-09-18 18:03 ` [PATCH v6 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
2025-09-18 18:04 ` [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells Eddie James
2025-09-18 23:01 ` Rob Herring
2025-09-18 18:04 ` [PATCH v6 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:04 ` [PATCH v6 7/7] ARM: dts: aspeed: Fix max31785 fan node naming Eddie James
2025-09-18 22:33 ` [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Rob Herring (Arm)
2025-09-18 22:59 ` Rob Herring
2025-09-22 14:35 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250918180402.199373-4-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).