* [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system
@ 2025-09-18 18:03 Eddie James
2025-09-18 18:03 ` [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
` (7 more replies)
0 siblings, 8 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:03 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
The Balcones system is similar to Bonnell but with a POWER11 processor.
Changes since v5:
- Add patch to add address and size cells to max31790 document
- Don't remove address and size cells in max31785 fixes change
Changes since v4:
- Add patch to fix max31785 warnings
- Add patch to fix missing Bonnell documentation
Changes since v3:
- Add max31785 to the max31790 document instead of to trivial-devices
- Fix minor formatting in dps310 document
Changes since v2:
- Fix a couple of incorrect i2c addresses
- Document dps310 and max31785 properly
- Drop the UCD binding documentation update, it's been fixed
Changes since v1:
- Add all the ucd9000 driver supported compatible strings
- Fix node ordering in Balcones device tree
- Improve commit message to explain addition of ibm-power11-dual.dtsi
Eddie James (7):
dt-bindings: arm: aspeed: add IBM Balcones board
dt-bindings: arm: aspeed: add IBM Bonnell board
dt-bindings: iio: Add Infineon DPS310 sensor documentation
dt-bindings: hwmon: Move max31785 compatibles to max31790 document
dt-bindings: hwmon: max31790: Document address and size cells
ARM: dts: aspeed: Add Balcones system
ARM: dts: aspeed: Fix max31785 fan node naming
.../bindings/arm/aspeed/aspeed.yaml | 2 +
.../devicetree/bindings/hwmon/max31785.txt | 22 -
.../bindings/hwmon/maxim,max31790.yaml | 12 +-
.../iio/pressure/infineon,dps310.yaml | 44 +
.../devicetree/bindings/trivial-devices.yaml | 2 -
MAINTAINERS | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++
.../dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 +-
.../dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 +-
.../dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 +-
.../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 8 +-
.../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
14 files changed, 1465 insertions(+), 808 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt
create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
--
2.51.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
@ 2025-09-18 18:03 ` Eddie James
2025-09-18 18:03 ` [PATCH v6 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
` (6 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:03 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
Document a new AST2600 BMC board for IBM P11 server.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index aedefca7cf4a8..b2fcfcc4a3b9a 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -93,6 +93,7 @@ properties:
- facebook,minerva-cmc
- facebook,santabarbara-bmc
- facebook,yosemite4-bmc
+ - ibm,balcones-bmc
- ibm,blueridge-bmc
- ibm,everest-bmc
- ibm,fuji-bmc
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:03 ` [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
@ 2025-09-18 18:03 ` Eddie James
2025-09-18 18:03 ` [PATCH v6 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
` (5 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:03 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
Document the existing AST2600 BMC board for IBM P10 server.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index b2fcfcc4a3b9a..9730df98b945a 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -95,6 +95,7 @@ properties:
- facebook,yosemite4-bmc
- ibm,balcones-bmc
- ibm,blueridge-bmc
+ - ibm,bonnell-bmc
- ibm,everest-bmc
- ibm,fuji-bmc
- ibm,rainier-bmc
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:03 ` [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-09-18 18:03 ` [PATCH v6 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
@ 2025-09-18 18:03 ` Eddie James
2025-09-18 18:03 ` [PATCH v6 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
` (4 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:03 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
The DPS310 is a barometric pressure and temperature sensor with
an I2C interface. Remove it from trivial-devices.yaml and add its
own documentation.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
.../iio/pressure/infineon,dps310.yaml | 44 +++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 2 -
MAINTAINERS | 1 +
3 files changed, 45 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
new file mode 100644
index 0000000000000..7c0782e2a821b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon DPS310 barometric pressure and temperature sensor
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The DPS310 is a barometric pressure and temperature sensor with an I2C
+ interface.
+
+properties:
+ compatible:
+ enum:
+ - infineon,dps310
+
+ reg:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 7609acaa752d5..a72b7fabc7034 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -127,8 +127,6 @@ properties:
- ibm,cffps2
# IBM On-Chip Controller hwmon device
- ibm,p8-occ-hwmon
- # Infineon barometric pressure and temperature sensor
- - infineon,dps310
# Infineon IR36021 digital POL buck controller
- infineon,ir36021
# Infineon IRPS5401 Voltage Regulator (PMIC)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9da37c8dee69d..656eada3d6389 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12176,6 +12176,7 @@ INFINEON DPS310 Driver
M: Eddie James <eajames@linux.ibm.com>
L: linux-iio@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
F: drivers/iio/pressure/dps310.c
INFINEON PEB2466 ASoC CODEC
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
` (2 preceding siblings ...)
2025-09-18 18:03 ` [PATCH v6 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
@ 2025-09-18 18:03 ` Eddie James
2025-09-18 18:04 ` [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells Eddie James
` (3 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:03 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
The binding for the max31785 is the same as the max31790, so just add
some compatible strings for the max31785 chip.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
.../devicetree/bindings/hwmon/max31785.txt | 22 -------------------
.../bindings/hwmon/maxim,max31790.yaml | 6 ++++-
2 files changed, 5 insertions(+), 23 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt
diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt
deleted file mode 100644
index 106e08c56aaa9..0000000000000
--- a/Documentation/devicetree/bindings/hwmon/max31785.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Bindings for the Maxim MAX31785 Intelligent Fan Controller
-==========================================================
-
-Reference:
-
-https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
-
-The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan
-management with temperature and remote voltage sensing. Various fan control
-features are provided, including PWM frequency control, temperature hysteresis,
-dual tachometer measurements, and fan health monitoring.
-
-Required properties:
-- compatible : One of "maxim,max31785" or "maxim,max31785a"
-- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55.
-
-Example:
-
- fans@52 {
- compatible = "maxim,max31785";
- reg = <0x52>;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
index b1ff496f87f95..b2dc813b1ab44 100644
--- a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
@@ -20,7 +20,11 @@ description: >
properties:
compatible:
- const: maxim,max31790
+ enum:
+ - maxim,max31785
+ - maxim,max31785a
+ - maxim,max31785b
+ - maxim,max31790
reg:
maxItems: 1
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
` (3 preceding siblings ...)
2025-09-18 18:03 ` [PATCH v6 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
@ 2025-09-18 18:04 ` Eddie James
2025-09-18 23:01 ` Rob Herring
2025-09-18 18:04 ` [PATCH v6 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
` (2 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:04 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
Since fan properties can include reg, the fan controller should be
able to specify address-cells and size-cells properties.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
index b2dc813b1ab44..42e7030360f1c 100644
--- a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
@@ -35,6 +35,12 @@ properties:
resets:
maxItems: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
"#pwm-cells":
const: 1
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 6/7] ARM: dts: aspeed: Add Balcones system
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
` (4 preceding siblings ...)
2025-09-18 18:04 ` [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells Eddie James
@ 2025-09-18 18:04 ` Eddie James
2025-09-18 18:04 ` [PATCH v6 7/7] ARM: dts: aspeed: Fix max31785 fan node naming Eddie James
2025-09-18 22:33 ` [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Rob Herring (Arm)
7 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:04 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
The Balcones system is similar to Bonnell but with a POWER11 processor.
Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
tree is needed. Therefore, split up the quad chip FSI tree.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++
.../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
4 files changed, 1391 insertions(+), 767 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 0f0b5b7076545..b56429777c7ef 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-facebook-yosemite4.dtb \
+ aspeed-bmc-ibm-balcones.dtb \
aspeed-bmc-ibm-blueridge.dtb \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
new file mode 100644
index 0000000000000..63fcb7a7619ab
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-dual.dtsi"
+
+/ {
+ model = "Balcones";
+ compatible = "ibm,balcones-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ i2c16 = &i2c11mux0chn0;
+ i2c17 = &i2c11mux0chn1;
+ i2c18 = &i2c11mux0chn2;
+ i2c19 = &i2c11mux0chn3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <6>;
+ };
+
+ event-fan1-presence {
+ gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <7>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-fan0 {
+ gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ led-fan1 {
+ gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emmc {
+ clk-phase-mmc-hs200 = <180>, <180>;
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","fan-ctlr-reset","rtc-battery-voltage-read-enable",
+ "reset-cause-pinhole","","","","",
+ /*G0-G7*/ "fan0","fan1","","","","","","",
+ /*H0-H7*/ "","","rear-enc-id0","rear-enc-fault0","","","","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+ "","","",
+ /*S0-S7*/ "presence-ps0","presence-ps1","","","power-ffs-sync-history","","",
+ "",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ gpio@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "",
+ "RUSSEL_FW_I2C_ENABLE_N",
+ "RUSSEL_OPPANEL_PRESENCE_N",
+ "BLYTH_OPPANEL_PRESENCE_N",
+ "CPU_TPM_CARD_PRESENT_N",
+ "",
+ "",
+ "DASD_BP_PRESENT_N";
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ pmic@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ power-supply@5a {
+ compatible = "acbel,fsg032";
+ reg = <0x5a>;
+ };
+
+ power-supply@5b {
+ compatible = "acbel,fsg032";
+ reg = <0x5b>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard2-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard2-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ multi-master;
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ pwm@53 {
+ compatible = "maxim,max31785a";
+ reg = <0x53>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ pressure-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "",
+ "APSS_RESET_N",
+ "",
+ "N_MODE_CPU_N",
+ "",
+ "",
+ "P10_DCM_PRESENT",
+ "";
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "",
+ "",
+ "SLOT2_PRSNT_EN_RSVD",
+ "",
+ "",
+ "",
+ "",
+ "SLOT2_EXPANDER_PRSNT_N",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ gpio@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "BOOT_RCVRY_TWI",
+ "BOOT_RCVRY_UART",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PE_SWITCH_RSTB_N";
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp435";
+ reg = <0x4c>;
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9849";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c11mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c11mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c11mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c11mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&ibt {
+ status = "okay";
+};
+
+&kcs2 {
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+};
+
+&lpc_ctrl {
+ memory-region = <&flash_memory>;
+ status = "okay";
+};
+
+&mac2 {
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ use-ncsi;
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
new file mode 100644
index 0000000000000..6db02d4753800
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+
+/ {
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+
+ sbefifo100 = &sbefifo100;
+ sbefifo101 = &sbefifo101;
+ sbefifo110 = &sbefifo110;
+ sbefifo111 = &sbefifo111;
+ sbefifo112 = &sbefifo112;
+ sbefifo113 = &sbefifo113;
+ sbefifo114 = &sbefifo114;
+ sbefifo115 = &sbefifo115;
+ sbefifo202 = &sbefifo202;
+ sbefifo203 = &sbefifo203;
+ sbefifo210 = &sbefifo210;
+ sbefifo211 = &sbefifo211;
+ sbefifo214 = &sbefifo214;
+ sbefifo215 = &sbefifo215;
+ sbefifo216 = &sbefifo216;
+ sbefifo217 = &sbefifo217;
+
+ scom100 = &scom100;
+ scom101 = &scom101;
+ scom110 = &scom110;
+ scom111 = &scom111;
+ scom112 = &scom112;
+ scom113 = &scom113;
+ scom114 = &scom114;
+ scom115 = &scom115;
+ scom202 = &scom202;
+ scom203 = &scom203;
+ scom210 = &scom210;
+ scom211 = &scom211;
+ scom214 = &scom214;
+ scom215 = &scom215;
+ scom216 = &scom216;
+ scom217 = &scom217;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+ };
+};
+
+&fsim0 {
+ bus-frequency = <100000000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom100: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo100: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom101: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo101: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom110: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo110: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom111: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo111: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom112: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo112: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom113: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo113: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom114: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo114: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom115: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo115: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi_hub0: fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom202: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo202: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom203: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo203: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom210: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo210: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom211: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo211: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom214: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo214: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom215: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo215: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom216: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo216: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom217: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo217: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
index 68c941a194b64..7aa4113d30263 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -1,24 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2024 IBM Corp.
+#include "ibm-power11-dual.dtsi"
+
/ {
aliases {
- i2c100 = &cfam0_i2c0;
- i2c101 = &cfam0_i2c1;
- i2c110 = &cfam0_i2c10;
- i2c111 = &cfam0_i2c11;
- i2c112 = &cfam0_i2c12;
- i2c113 = &cfam0_i2c13;
- i2c114 = &cfam0_i2c14;
- i2c115 = &cfam0_i2c15;
- i2c202 = &cfam1_i2c2;
- i2c203 = &cfam1_i2c3;
- i2c210 = &cfam1_i2c10;
- i2c211 = &cfam1_i2c11;
- i2c214 = &cfam1_i2c14;
- i2c215 = &cfam1_i2c15;
- i2c216 = &cfam1_i2c16;
- i2c217 = &cfam1_i2c17;
i2c300 = &cfam2_i2c0;
i2c301 = &cfam2_i2c1;
i2c310 = &cfam2_i2c10;
@@ -36,22 +22,6 @@ aliases {
i2c416 = &cfam3_i2c16;
i2c417 = &cfam3_i2c17;
- sbefifo100 = &sbefifo100;
- sbefifo101 = &sbefifo101;
- sbefifo110 = &sbefifo110;
- sbefifo111 = &sbefifo111;
- sbefifo112 = &sbefifo112;
- sbefifo113 = &sbefifo113;
- sbefifo114 = &sbefifo114;
- sbefifo115 = &sbefifo115;
- sbefifo202 = &sbefifo202;
- sbefifo203 = &sbefifo203;
- sbefifo210 = &sbefifo210;
- sbefifo211 = &sbefifo211;
- sbefifo214 = &sbefifo214;
- sbefifo215 = &sbefifo215;
- sbefifo216 = &sbefifo216;
- sbefifo217 = &sbefifo217;
sbefifo300 = &sbefifo300;
sbefifo301 = &sbefifo301;
sbefifo310 = &sbefifo310;
@@ -69,22 +39,6 @@ aliases {
sbefifo416 = &sbefifo416;
sbefifo417 = &sbefifo417;
- scom100 = &scom100;
- scom101 = &scom101;
- scom110 = &scom110;
- scom111 = &scom111;
- scom112 = &scom112;
- scom113 = &scom113;
- scom114 = &scom114;
- scom115 = &scom115;
- scom202 = &scom202;
- scom203 = &scom203;
- scom210 = &scom210;
- scom211 = &scom211;
- scom214 = &scom214;
- scom215 = &scom215;
- scom216 = &scom216;
- scom217 = &scom217;
scom300 = &scom300;
scom301 = &scom301;
scom310 = &scom310;
@@ -102,14 +56,6 @@ aliases {
scom416 = &scom416;
scom417 = &scom417;
- spi10 = &cfam0_spi0;
- spi11 = &cfam0_spi1;
- spi12 = &cfam0_spi2;
- spi13 = &cfam0_spi3;
- spi20 = &cfam1_spi0;
- spi21 = &cfam1_spi1;
- spi22 = &cfam1_spi2;
- spi23 = &cfam1_spi3;
spi30 = &cfam2_spi0;
spi31 = &cfam2_spi1;
spi32 = &cfam2_spi2;
@@ -121,718 +67,7 @@ aliases {
};
};
-&fsim0 {
- #address-cells = <2>;
- #size-cells = <0>;
- status = "okay";
- bus-frequency = <100000000>;
- cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom@1000 {
- compatible = "ibm,p9-scom";
- reg = <0x1000 0x400>;
- };
-
- i2c@1800 {
- compatible = "ibm,i2c-fsi";
- reg = <0x1800 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cfam0_i2c0: i2c-bus@0 {
- reg = <0>; /* OMI01 */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom100: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo100: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c1: i2c-bus@1 {
- reg = <1>; /* OMI23 */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom101: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo101: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c10: i2c-bus@a {
- reg = <10>; /* OP3A */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom110: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo110: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c11: i2c-bus@b {
- reg = <11>; /* OP3B */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom111: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo111: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c12: i2c-bus@c {
- reg = <12>; /* OP4A */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom112: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo112: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c13: i2c-bus@d {
- reg = <13>; /* OP4B */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom113: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo113: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c14: i2c-bus@e {
- reg = <14>; /* OP5A */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom114: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo114: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam0_i2c15: i2c-bus@f {
- reg = <15>; /* OP5B */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom115: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo115: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
- };
-
- fsi2spi@1c00 {
- compatible = "ibm,fsi2spi";
- reg = <0x1c00 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cfam0_spi0: spi@0 {
- compatible = "ibm,spi-fsi";
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
-
- cfam0_spi1: spi@20 {
- compatible = "ibm,spi-fsi";
- reg = <0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
-
- cfam0_spi2: spi@40 {
- compatible = "ibm,spi-fsi";
- reg = <0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
-
- cfam0_spi3: spi@60 {
- compatible = "ibm,spi-fsi";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
- };
-
- sbefifo@2400 {
- compatible = "ibm,p9-sbefifo";
- reg = <0x2400 0x400>;
-
- occ {
- compatible = "ibm,p10-occ";
-
- hwmon {
- compatible = "ibm,p10-occ-hwmon";
- ibm,no-poll-on-init;
- };
- };
- };
-
- fsi_hub0: fsi@3400 {
- compatible = "ibm,p9-fsi-controller";
- reg = <0x3400 0x400>;
- #address-cells = <2>;
- #size-cells = <0>;
- };
- };
-};
-
&fsi_hub0 {
- cfam@1,0 {
- reg = <1 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <1>;
-
- scom@1000 {
- compatible = "ibm,p9-scom";
- reg = <0x1000 0x400>;
- };
-
- i2c@1800 {
- compatible = "ibm,i2c-fsi";
- reg = <0x1800 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cfam1_i2c2: i2c-bus@2 {
- reg = <2>; /* OMI45 */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom202: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo202: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c3: i2c-bus@3 {
- reg = <3>; /* OMI67 */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom203: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo203: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c10: i2c-bus@a {
- reg = <10>; /* OP3A */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom210: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo210: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c11: i2c-bus@b {
- reg = <11>; /* OP3B */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom211: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo211: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c14: i2c-bus@e {
- reg = <14>; /* OP5A */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom214: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo214: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c15: i2c-bus@f {
- reg = <15>; /* OP5B */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom215: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo215: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c16: i2c-bus@10 {
- reg = <16>; /* OP6A */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom216: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo216: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
-
- cfam1_i2c17: i2c-bus@11 {
- reg = <17>; /* OP6B */
- #address-cells = <1>;
- #size-cells = <0>;
-
- fsi@20 {
- compatible = "ibm,i2cr-fsi-master";
- reg = <0x20>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- cfam@0,0 {
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <1>;
- chip-id = <0>;
-
- scom217: scom@1000 {
- compatible = "ibm,i2cr-scom";
- reg = <0x1000 0x400>;
- };
-
- sbefifo217: sbefifo@2400 {
- compatible = "ibm,odyssey-sbefifo";
- reg = <0x2400 0x400>;
- };
- };
- };
- };
- };
-
- fsi2spi@1c00 {
- compatible = "ibm,fsi2spi";
- reg = <0x1c00 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cfam1_spi0: spi@0 {
- compatible = "ibm,spi-fsi";
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
-
- cfam1_spi1: spi@20 {
- compatible = "ibm,spi-fsi";
- reg = <0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
-
- cfam1_spi2: spi@40 {
- compatible = "ibm,spi-fsi";
- reg = <0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
-
- cfam1_spi3: spi@60 {
- compatible = "ibm,spi-fsi";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom@0 {
- compatible = "atmel,at25";
- reg = <0>;
- address-width = <24>;
- pagesize = <256>;
- size = <0x80000>;
- spi-max-frequency = <10000000>;
- };
- };
- };
-
- sbefifo@2400 {
- compatible = "ibm,p9-sbefifo";
- reg = <0x2400 0x400>;
-
- occ {
- compatible = "ibm,p10-occ";
-
- hwmon {
- compatible = "ibm,p10-occ-hwmon";
- ibm,no-poll-on-init;
- };
- };
- };
-
- fsi@3400 {
- compatible = "ibm,p9-fsi-controller";
- reg = <0x3400 0x400>;
- #address-cells = <2>;
- #size-cells = <0>;
- no-scan-on-init;
- };
- };
-
cfam@2,0 {
reg = <2 0>;
#address-cells = <1>;
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 7/7] ARM: dts: aspeed: Fix max31785 fan node naming
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
` (5 preceding siblings ...)
2025-09-18 18:04 ` [PATCH v6 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
@ 2025-09-18 18:04 ` Eddie James
2025-09-18 22:33 ` [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Rob Herring (Arm)
7 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-18 18:04 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
Now that the max31785 is properly documented, fix up the uses of
it in the Aspeed dts.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 ++--
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 ++++----
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 ++++++------
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 8 ++++----
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
index 2f5d4075a64ad..c2a4153bdcf49 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -276,13 +276,13 @@ max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
- fan0: fan@0 {
+ fan0: fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan1: fan@1 {
+ fan1: fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 9f144f527f03b..2f42482d98df2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2065,25 +2065,25 @@ max31785@52 {
#size-cells = <0>;
reg = <0x52>;
- fan@0 {
+ fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan@1 {
+ fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
- fan@2 {
+ fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
- fan@3 {
+ fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index c5fb5d410001b..bbe26f950821e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -1079,37 +1079,37 @@ max: max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
- fan0: fan@0 {
+ fan0: fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan1: fan@1 {
+ fan1: fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
- fan2: fan@2 {
+ fan2: fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
- fan3: fan@3 {
+ fan3: fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
};
- fan4: fan@4 {
+ fan4: fan-4 {
compatible = "pmbus-fan";
reg = <4>;
tach-pulses = <2>;
};
- fan5: fan@5 {
+ fan5: fan-5 {
compatible = "pmbus-fan";
reg = <5>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index b31eb8e58c6b4..91d514567cba5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -480,7 +480,7 @@ max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
- fan@0 {
+ fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
@@ -493,7 +493,7 @@ fan@0 {
maxim,fan-fault-pin-mon;
};
- fan@1 {
+ fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
@@ -506,7 +506,7 @@ fan@1 {
maxim,fan-fault-pin-mon;
};
- fan@2 {
+ fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
@@ -519,7 +519,7 @@ fan@2 {
maxim,fan-fault-pin-mon;
};
- fan@3 {
+ fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
--
2.51.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
` (6 preceding siblings ...)
2025-09-18 18:04 ` [PATCH v6 7/7] ARM: dts: aspeed: Fix max31785 fan node naming Eddie James
@ 2025-09-18 22:33 ` Rob Herring (Arm)
2025-09-18 22:59 ` Rob Herring
7 siblings, 1 reply; 12+ messages in thread
From: Rob Herring (Arm) @ 2025-09-18 22:33 UTC (permalink / raw)
To: Eddie James; +Cc: conor+dt, devicetree, linux-aspeed, krzk+dt, andrew
On Thu, 18 Sep 2025 13:03:55 -0500, Eddie James wrote:
> The Balcones system is similar to Bonnell but with a POWER11 processor.
>
> Changes since v5:
> - Add patch to add address and size cells to max31790 document
> - Don't remove address and size cells in max31785 fixes change
>
> Changes since v4:
> - Add patch to fix max31785 warnings
> - Add patch to fix missing Bonnell documentation
>
> Changes since v3:
> - Add max31785 to the max31790 document instead of to trivial-devices
> - Fix minor formatting in dps310 document
>
> Changes since v2:
> - Fix a couple of incorrect i2c addresses
> - Document dps310 and max31785 properly
> - Drop the UCD binding documentation update, it's been fixed
>
> Changes since v1:
> - Add all the ucd9000 driver supported compatible strings
> - Fix node ordering in Balcones device tree
> - Improve commit message to explain addition of ibm-power11-dual.dtsi
>
> Eddie James (7):
> dt-bindings: arm: aspeed: add IBM Balcones board
> dt-bindings: arm: aspeed: add IBM Bonnell board
> dt-bindings: iio: Add Infineon DPS310 sensor documentation
> dt-bindings: hwmon: Move max31785 compatibles to max31790 document
> dt-bindings: hwmon: max31790: Document address and size cells
> ARM: dts: aspeed: Add Balcones system
> ARM: dts: aspeed: Fix max31785 fan node naming
>
> .../bindings/arm/aspeed/aspeed.yaml | 2 +
> .../devicetree/bindings/hwmon/max31785.txt | 22 -
> .../bindings/hwmon/maxim,max31790.yaml | 12 +-
> .../iio/pressure/infineon,dps310.yaml | 44 +
> .../devicetree/bindings/trivial-devices.yaml | 2 -
> MAINTAINERS | 1 +
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++
> .../dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 +-
> .../dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 +-
> .../dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 +-
> .../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 8 +-
> .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
> .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
> 14 files changed, 1465 insertions(+), 808 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt
> create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
> create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
>
> --
> 2.51.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250917 (best guess, 10/11 blobs matched)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250918180402.199373-1-eajames@linux.ibm.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): fan-4: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): fan-5: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-4: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-5: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): fan-4: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): fan-5: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-4: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-5: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): fan-4: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): fan-5: Unevaluated properties are not allowed ('compatible', 'tach-pulses' were unexpected)
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-4: failed to match any schema with compatible: ['pmbus-fan']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan-5: failed to match any schema with compatible: ['pmbus-fan']
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system
2025-09-18 22:33 ` [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Rob Herring (Arm)
@ 2025-09-18 22:59 ` Rob Herring
2025-09-22 14:35 ` Eddie James
0 siblings, 1 reply; 12+ messages in thread
From: Rob Herring @ 2025-09-18 22:59 UTC (permalink / raw)
To: Eddie James; +Cc: conor+dt, devicetree, linux-aspeed, krzk+dt, andrew
On Thu, Sep 18, 2025 at 05:33:06PM -0500, Rob Herring (Arm) wrote:
>
> On Thu, 18 Sep 2025 13:03:55 -0500, Eddie James wrote:
> > The Balcones system is similar to Bonnell but with a POWER11 processor.
> >
> > Changes since v5:
> > - Add patch to add address and size cells to max31790 document
> > - Don't remove address and size cells in max31785 fixes change
> >
> > Changes since v4:
> > - Add patch to fix max31785 warnings
> > - Add patch to fix missing Bonnell documentation
> >
> > Changes since v3:
> > - Add max31785 to the max31790 document instead of to trivial-devices
> > - Fix minor formatting in dps310 document
> >
> > Changes since v2:
> > - Fix a couple of incorrect i2c addresses
> > - Document dps310 and max31785 properly
> > - Drop the UCD binding documentation update, it's been fixed
> >
> > Changes since v1:
> > - Add all the ucd9000 driver supported compatible strings
> > - Fix node ordering in Balcones device tree
> > - Improve commit message to explain addition of ibm-power11-dual.dtsi
> >
> > Eddie James (7):
> > dt-bindings: arm: aspeed: add IBM Balcones board
> > dt-bindings: arm: aspeed: add IBM Bonnell board
> > dt-bindings: iio: Add Infineon DPS310 sensor documentation
> > dt-bindings: hwmon: Move max31785 compatibles to max31790 document
> > dt-bindings: hwmon: max31790: Document address and size cells
> > ARM: dts: aspeed: Add Balcones system
> > ARM: dts: aspeed: Fix max31785 fan node naming
> >
> > .../bindings/arm/aspeed/aspeed.yaml | 2 +
> > .../devicetree/bindings/hwmon/max31785.txt | 22 -
> > .../bindings/hwmon/maxim,max31790.yaml | 12 +-
> > .../iio/pressure/infineon,dps310.yaml | 44 +
> > .../devicetree/bindings/trivial-devices.yaml | 2 -
> > MAINTAINERS | 1 +
> > arch/arm/boot/dts/aspeed/Makefile | 1 +
> > .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++
> > .../dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 +-
> > .../dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 +-
> > .../dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 +-
> > .../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 8 +-
> > .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
> > .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
> > 14 files changed, 1465 insertions(+), 808 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt
> > create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
> > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
> > create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
> >
> > --
> > 2.51.0
> >
> >
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> This patch series was applied (using b4) to base:
> Base: attempting to guess base-commit...
> Base: tags/next-20250917 (best guess, 10/11 blobs matched)
>
> If this is not the correct base, please add 'base-commit' tag
> (or use b4 which does this automatically)
>
> New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250918180402.199373-1-eajames@linux.ibm.com:
>
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
> from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
> from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
> from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
Sigh. Are you testing this before sending?
None of these "maxim" properties are documented nor used by any driver.
I don't know what a 'pmbus-fan' is as it is not documented.
For the fan child nodes and their node names, it is quite simple. You
have 2 options:
fan-[0-9]+:
- no reg property
- no #address-cells or #size-cells in the parent node
fan@[0-9a-f]:
- must have reg property
- must have #address-cells or #size-cells in the parent node
If the parent device has a concept of fan channels (perhaps pages as
the driver calls them?), then you should use 'reg' to map the fan
channels to child nodes. For some fan controllers, 'reg' corresponds
to the PWM number or pin number. Node names are generally not considered
ABI, so you shouldn't be using them at all. That means the "fan-[0-9]+"
case has no mapping between the fan node and instances in the fan
controller.
Rob
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells
2025-09-18 18:04 ` [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells Eddie James
@ 2025-09-18 23:01 ` Rob Herring
0 siblings, 0 replies; 12+ messages in thread
From: Rob Herring @ 2025-09-18 23:01 UTC (permalink / raw)
To: Eddie James; +Cc: linux-aspeed, devicetree, andrew, conor+dt, krzk+dt
On Thu, Sep 18, 2025 at 01:04:00PM -0500, Eddie James wrote:
> Since fan properties can include reg, the fan controller should be
> able to specify address-cells and size-cells properties.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
> Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
> index b2dc813b1ab44..42e7030360f1c 100644
> --- a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
> @@ -35,6 +35,12 @@ properties:
> resets:
> maxItems: 1
>
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
As I explained, this is wrong if the child nodes don't have an address
and are named "fan-[0-9]" which they are.
> "#pwm-cells":
> const: 1
>
> --
> 2.51.0
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system
2025-09-18 22:59 ` Rob Herring
@ 2025-09-22 14:35 ` Eddie James
0 siblings, 0 replies; 12+ messages in thread
From: Eddie James @ 2025-09-22 14:35 UTC (permalink / raw)
To: Rob Herring; +Cc: conor+dt, devicetree, linux-aspeed, krzk+dt, andrew
On 9/18/25 5:59 PM, Rob Herring wrote:
> On Thu, Sep 18, 2025 at 05:33:06PM -0500, Rob Herring (Arm) wrote:
>> On Thu, 18 Sep 2025 13:03:55 -0500, Eddie James wrote:
>>> The Balcones system is similar to Bonnell but with a POWER11 processor.
>>>
>>> Changes since v5:
>>> - Add patch to add address and size cells to max31790 document
>>> - Don't remove address and size cells in max31785 fixes change
>>>
>>> Changes since v4:
>>> - Add patch to fix max31785 warnings
>>> - Add patch to fix missing Bonnell documentation
>>>
>>> Changes since v3:
>>> - Add max31785 to the max31790 document instead of to trivial-devices
>>> - Fix minor formatting in dps310 document
>>>
>>> Changes since v2:
>>> - Fix a couple of incorrect i2c addresses
>>> - Document dps310 and max31785 properly
>>> - Drop the UCD binding documentation update, it's been fixed
>>>
>>> Changes since v1:
>>> - Add all the ucd9000 driver supported compatible strings
>>> - Fix node ordering in Balcones device tree
>>> - Improve commit message to explain addition of ibm-power11-dual.dtsi
>>>
>>> Eddie James (7):
>>> dt-bindings: arm: aspeed: add IBM Balcones board
>>> dt-bindings: arm: aspeed: add IBM Bonnell board
>>> dt-bindings: iio: Add Infineon DPS310 sensor documentation
>>> dt-bindings: hwmon: Move max31785 compatibles to max31790 document
>>> dt-bindings: hwmon: max31790: Document address and size cells
>>> ARM: dts: aspeed: Add Balcones system
>>> ARM: dts: aspeed: Fix max31785 fan node naming
>>>
>>> .../bindings/arm/aspeed/aspeed.yaml | 2 +
>>> .../devicetree/bindings/hwmon/max31785.txt | 22 -
>>> .../bindings/hwmon/maxim,max31790.yaml | 12 +-
>>> .../iio/pressure/infineon,dps310.yaml | 44 +
>>> .../devicetree/bindings/trivial-devices.yaml | 2 -
>>> MAINTAINERS | 1 +
>>> arch/arm/boot/dts/aspeed/Makefile | 1 +
>>> .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++
>>> .../dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 +-
>>> .../dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 +-
>>> .../dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 +-
>>> .../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 8 +-
>>> .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
>>> .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
>>> 14 files changed, 1465 insertions(+), 808 deletions(-)
>>> delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt
>>> create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
>>> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
>>> create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
>>>
>>> --
>>> 2.51.0
>>>
>>>
>>>
>>
>> My bot found new DTB warnings on the .dts files added or changed in this
>> series.
>>
>> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
>> are fixed by another series. Ultimately, it is up to the platform
>> maintainer whether these warnings are acceptable or not. No need to reply
>> unless the platform maintainer has comments.
>>
>> If you already ran DT checks and didn't see these error(s), then
>> make sure dt-schema is up to date:
>>
>> pip3 install dtschema --upgrade
>>
>>
>> This patch series was applied (using b4) to base:
>> Base: attempting to guess base-commit...
>> Base: tags/next-20250917 (best guess, 10/11 blobs matched)
>>
>> If this is not the correct base, please add 'base-commit' tag
>> (or use b4 which does this automatically)
>>
>> New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250918180402.199373-1-eajames@linux.ibm.com:
>>
>> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
>> from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
>> from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
>> from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-0: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
>> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-1: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
>> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-2: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
>> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): fan-3: Unevaluated properties are not allowed ('compatible', 'maxim,fan-dual-tach', 'maxim,fan-fault-pin-mon', 'maxim,fan-no-fault-ramp', 'maxim,fan-no-watchdog', 'maxim,fan-pwm-freq', 'maxim,fan-ramp', 'maxim,fan-rotor-input', 'tach-pulses' were unexpected)
>> from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-0: failed to match any schema with compatible: ['pmbus-fan']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-1: failed to match any schema with compatible: ['pmbus-fan']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-2: failed to match any schema with compatible: ['pmbus-fan']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan-3: failed to match any schema with compatible: ['pmbus-fan']
> Sigh. Are you testing this before sending?
Yes, but I wasn't sure if this was better or worse than before! These
same kind of warnings show up without my changes, but since the node
names are different, they show up in your list of new warnings.
Anyway I didn't realize it was allowable to do fan@ at all; I can add a
pattern property in max documentation for that. And I left the maxim
properties because I'd argue it's out of the scope of this change, but I
can go ahead and remove them.
Thanks, and sorry for the churn.
Eddie
>
> None of these "maxim" properties are documented nor used by any driver.
> I don't know what a 'pmbus-fan' is as it is not documented.
>
> For the fan child nodes and their node names, it is quite simple. You
> have 2 options:
>
> fan-[0-9]+:
> - no reg property
> - no #address-cells or #size-cells in the parent node
>
> fan@[0-9a-f]:
> - must have reg property
> - must have #address-cells or #size-cells in the parent node
>
> If the parent device has a concept of fan channels (perhaps pages as
> the driver calls them?), then you should use 'reg' to map the fan
> channels to child nodes. For some fan controllers, 'reg' corresponds
> to the PWM number or pin number. Node names are generally not considered
> ABI, so you shouldn't be using them at all. That means the "fan-[0-9]+"
> case has no mapping between the fan node and instances in the fan
> controller.
>
> Rob
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2025-09-22 14:36 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:03 ` [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-09-18 18:03 ` [PATCH v6 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
2025-09-18 18:03 ` [PATCH v6 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
2025-09-18 18:03 ` [PATCH v6 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
2025-09-18 18:04 ` [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells Eddie James
2025-09-18 23:01 ` Rob Herring
2025-09-18 18:04 ` [PATCH v6 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:04 ` [PATCH v6 7/7] ARM: dts: aspeed: Fix max31785 fan node naming Eddie James
2025-09-18 22:33 ` [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Rob Herring (Arm)
2025-09-18 22:59 ` Rob Herring
2025-09-22 14:35 ` Eddie James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).