From: David Yang <mmyangfl@gmail.com>
To: netdev@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Simon Horman <horms@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v10 0/5] net: dsa: yt921x: Add support for Motorcomm YT921x
Date: Fri, 19 Sep 2025 17:42:25 +0800 [thread overview]
Message-ID: <20250919094234.1491638-1-mmyangfl@gmail.com> (raw)
Motorcomm YT921x is a series of ethernet switches developed by Shanghai
Motorcomm Electronic Technology, including:
- YT9215S / YT9215RB / YT9215SC: 5 GbE phys
- YT9213NB / YT9214NB: 2 GbE phys
- YT9218N / YT9218MB: 8 GbE phys
and up to 2 serdes interfaces.
This patch adds basic support for a working DSA switch.
v9: https://lore.kernel.org/r/20250913044404.63641-1-mmyangfl@gmail.com
- add PHY_INTERFACE_MODE_REVSGMII
- remove mdio_verify()
- remove uncessary fdb flush opeartions
- rework mib reading
- set port pvid by port_set_pvid()
v8: https://lore.kernel.org/r/20250912024620.4032846-1-mmyangfl@gmail.com
- rework register polling
- rework mib reading
- other suggested code style changes
v7: https://lore.kernel.org/r/20250905181728.3169479-1-mmyangfl@gmail.com
- simplify locking scheme
v6: https://lore.kernel.org/r/20250824005116.2434998-1-mmyangfl@gmail.com
- handle unforwarded packets in tag driver
- move register and struct definitions to header file
- rework register abstraction and implement a driver lock
- implement *_stats and use a periodic work to fetch MIB
- remove EEPROM dump
- remove sysfs attr and other debug leftovers
- remove ds->user_mii_bus assignment
- run selftests and fix any errors found
v5: https://lore.kernel.org/r/20250820075420.1601068-1-mmyangfl@gmail.com
- use enum for reg in dt binding
- fix phylink_mac_ops in the driver
- fix coding style
v4: https://lore.kernel.org/r/20250818162445.1317670-1-mmyangfl@gmail.com
- remove switchid from dt binding
- remove hsr from tag driver
- use ratelimited log in tag driver
v3: https://lore.kernel.org/r/20250816052323.360788-1-mmyangfl@gmail.com
- fix words and warnings in dt binding
- remove unnecessary dev_warn_ratelimited and u64_from_u32
- remove lag and mst
- check for mdio results and fix a unlocked write in conduit_state_change
v2: https://lore.kernel.org/r/20250814065032.3766988-1-mmyangfl@gmail.com
- fix words in dt binding
- add support for lag and mst
v1: https://lore.kernel.org/r/20250808173808.273774-1-mmyangfl@gmail.com
- fix coding style
- add dt binding
- add support for fdb, vlan and bridge
David Yang (5):
dt-bindings: ethernet-phy: add reverse SGMII phy interface type
net: phy: introduce PHY_INTERFACE_MODE_REVSGMII
dt-bindings: net: dsa: yt921x: Add Motorcomm YT921x switch support
net: dsa: tag_yt921x: add support for Motorcomm YT921x tags
net: dsa: yt921x: Add support for Motorcomm YT921x
.../bindings/net/dsa/motorcomm,yt921x.yaml | 169 +
.../bindings/net/ethernet-controller.yaml | 1 +
drivers/net/dsa/Kconfig | 7 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/yt921x.c | 2897 +++++++++++++++++
drivers/net/dsa/yt921x.h | 505 +++
include/linux/phy.h | 4 +
include/net/dsa.h | 2 +
include/uapi/linux/if_ether.h | 1 +
net/dsa/Kconfig | 6 +
net/dsa/Makefile | 1 +
net/dsa/tag_yt921x.c | 141 +
12 files changed, 3735 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml
create mode 100644 drivers/net/dsa/yt921x.c
create mode 100644 drivers/net/dsa/yt921x.h
create mode 100644 net/dsa/tag_yt921x.c
--
2.51.0
next reply other threads:[~2025-09-19 9:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-19 9:42 David Yang [this message]
2025-09-19 9:42 ` [PATCH net-next v10 1/5] dt-bindings: ethernet-phy: add reverse SGMII phy interface type David Yang
2025-09-22 19:18 ` Rob Herring (Arm)
2025-09-19 9:42 ` [PATCH net-next v10 2/5] net: phy: introduce PHY_INTERFACE_MODE_REVSGMII David Yang
2025-09-20 7:55 ` kernel test robot
2025-09-20 8:42 ` Russell King (Oracle)
2025-09-19 9:42 ` [PATCH net-next v10 3/5] dt-bindings: net: dsa: yt921x: Add Motorcomm YT921x switch support David Yang
2025-09-19 9:42 ` [PATCH net-next v10 4/5] net: dsa: tag_yt921x: add support for Motorcomm YT921x tags David Yang
2025-09-19 9:42 ` [PATCH net-next v10 5/5] net: dsa: yt921x: Add support for Motorcomm YT921x David Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250919094234.1491638-1-mmyangfl@gmail.com \
--to=mmyangfl@gmail.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).