[PATCH v4 7/8] soc: renesas: Add support for Renesas RZ/N1 GPIO Interrupt Multiplexer

["Herve Codina (Schneider Electric)" <herve.codina@bootlin.com>]

On the Renesas RZ/N1 SoC, GPIOs can generate interruptions. Those
interruption lines are multiplexed by the GPIO Interrupt Multiplexer in
order to map 32 * 3 GPIO interrupt lines to 8 GIC interrupt lines.

The GPIO interrupt multiplexer IP does nothing but select 8 GPIO
IRQ lines out of the 96 available to wire them to the GIC input lines.

Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
---
 drivers/soc/renesas/Kconfig       |   4 +
 drivers/soc/renesas/Makefile      |   1 +
 drivers/soc/renesas/rzn1_irqmux.c | 136 ++++++++++++++++++++++++++++++
 3 files changed, 141 insertions(+)
 create mode 100644 drivers/soc/renesas/rzn1_irqmux.c

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 719b7f4f376f..0878b6884515 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -58,6 +58,7 @@ config ARCH_RZN1
 	select PM
 	select PM_GENERIC_DOMAINS
 	select ARM_AMBA
+	select RZN1_IRQMUX
 
 if ARM && ARCH_RENESAS
 
@@ -447,6 +448,9 @@ config PWC_RZV2M
 config RST_RCAR
 	bool "Reset Controller support for R-Car" if COMPILE_TEST
 
+config RZN1_IRQMUX
+	bool "Renesas RZ/N1 GPIO IRQ multiplexer support" if COMPILE_TEST
+
 config SYSC_RZ
 	bool "System controller for RZ SoCs" if COMPILE_TEST
 
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 3bdcc6a395d5..daa932c7698d 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -14,4 +14,5 @@ obj-$(CONFIG_SYS_R9A09G057)	+= r9a09g057-sys.o
 # Family
 obj-$(CONFIG_PWC_RZV2M)		+= pwc-rzv2m.o
 obj-$(CONFIG_RST_RCAR)		+= rcar-rst.o
+obj-$(CONFIG_RZN1_IRQMUX)		+= rzn1_irqmux.o
 obj-$(CONFIG_SYSC_RZ)		+= rz-sysc.o
diff --git a/drivers/soc/renesas/rzn1_irqmux.c b/drivers/soc/renesas/rzn1_irqmux.c
new file mode 100644
index 000000000000..1f33e357689f
--- /dev/null
+++ b/drivers/soc/renesas/rzn1_irqmux.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RZ/N1 GPIO Interrupt Multiplexer
+ *
+ * Copyright 2025 Schneider Electric
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/build_bug.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/*
+ * The array index is the output line index, the value at the index is the
+ * GIC SPI interrupt number the output line is connected to.
+ */
+static u32 rzn1_irqmux_output_lines[] = {
+	103, 104, 105, 106, 107, 108, 109, 110
+};
+
+static int rzn1_irqmux_parent_args_to_line_index(struct device *dev,
+						 const struct of_phandle_args *parent_args)
+{
+	int i;
+
+	/*
+	 * The parent interrupt should be one of the GIC controller.
+	 * Three arguments must be provided.
+	 *  - args[0]: GIC_SPI
+	 *  - args[1]: The GIC interrupt number
+	 *  - args[2]: The interrupt flags
+	 *
+	 * We retrieve the line index based on the GIC interrupt number
+	 * provided and rzn1_irqmux_output_line[] mapping array.
+	 */
+
+	if (parent_args->args_count != 3 ||
+	    parent_args->args[0] != GIC_SPI) {
+		dev_err(dev, "Invalid interrupt-map item\n");
+		return -EINVAL;
+	}
+
+	/* 8 output lines are available */
+	BUILD_BUG_ON(ARRAY_SIZE(rzn1_irqmux_output_lines) != 8);
+
+	for (i = 0; i < ARRAY_SIZE(rzn1_irqmux_output_lines); i++) {
+		if (parent_args->args[1] == rzn1_irqmux_output_lines[i])
+			return i;
+	}
+
+	dev_err(dev, "Invalid GIC interrupt %u\n", parent_args->args[1]);
+	return -EINVAL;
+}
+
+static int rzn1_irqmux_setup(struct device *dev, struct device_node *np, u32 __iomem *regs)
+{
+	struct of_imap_parser imap_parser;
+	struct of_imap_item imap_item;
+	int index;
+	int ret;
+	u32 tmp;
+
+	/* We support only #interrupt-cells = <1> and #address-cells = <0> */
+	ret = of_property_read_u32(np, "#interrupt-cells", &tmp);
+	if (ret)
+		return ret;
+	if (tmp != 1)
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "#address-cells", &tmp);
+	if (ret)
+		return ret;
+	if (tmp != 0)
+		return -EINVAL;
+
+	ret = of_imap_parser_init(&imap_parser, np, &imap_item);
+	if (ret)
+		return ret;
+
+	for_each_of_imap_item(&imap_parser, &imap_item) {
+		index = rzn1_irqmux_parent_args_to_line_index(dev, &imap_item.parent_args);
+		if (index < 0) {
+			of_node_put(imap_item.parent_args.np);
+			return index;
+		}
+
+		/*
+		 * The child #address-cells is 0 (already checked). The first
+		 * value in imap item is the src hwirq.
+		 */
+		writel(imap_item.child_imap[0], regs + index);
+	}
+
+	return 0;
+}
+
+static int rzn1_irqmux_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	u32 __iomem *regs;
+	int ret;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	ret = rzn1_irqmux_setup(dev, np, regs);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to setup mux\n");
+
+	return 0;
+}
+
+static const struct of_device_id rzn1_irqmux_of_match[] = {
+	{ .compatible = "renesas,rzn1-gpioirqmux", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzn1_irqmux_of_match);
+
+static struct platform_driver rzn1_irqmux_driver = {
+	.probe = rzn1_irqmux_probe,
+	.driver = {
+		.name = "rzn1_irqmux",
+		.of_match_table = rzn1_irqmux_of_match,
+	},
+};
+module_platform_driver(rzn1_irqmux_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("Renesas RZ/N1 GPIO IRQ Multiplexer Driver");
+MODULE_LICENSE("GPL");
-- 
2.51.0