From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: devicetree@vger.kernel.org, andrew@codeconstruct.com.au,
conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
eajames@linux.ibm.com
Subject: [PATCH v7 7/7] ARM: dts: aspeed: Fix max31785 fan properties
Date: Mon, 22 Sep 2025 12:58:04 -0500 [thread overview]
Message-ID: <20250922175804.31679-8-eajames@linux.ibm.com> (raw)
In-Reply-To: <20250922175804.31679-1-eajames@linux.ibm.com>
Remove non-existant fan properties from max31785 nodes.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
.../dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 ---
.../dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 -----
.../dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 -------
.../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 36 -------------------
4 files changed, 60 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
index 2f5d4075a64ad..a37399ff3cea2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -277,15 +277,11 @@ max31785@52 {
#size-cells = <0>;
fan0: fan@0 {
- compatible = "pmbus-fan";
reg = <0>;
- tach-pulses = <2>;
};
fan1: fan@1 {
- compatible = "pmbus-fan";
reg = <1>;
- tach-pulses = <2>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 9f144f527f03b..5a0975d52492c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2066,27 +2066,19 @@ max31785@52 {
reg = <0x52>;
fan@0 {
- compatible = "pmbus-fan";
reg = <0>;
- tach-pulses = <2>;
};
fan@1 {
- compatible = "pmbus-fan";
reg = <1>;
- tach-pulses = <2>;
};
fan@2 {
- compatible = "pmbus-fan";
reg = <2>;
- tach-pulses = <2>;
};
fan@3 {
- compatible = "pmbus-fan";
reg = <3>;
- tach-pulses = <2>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index c5fb5d410001b..e90421bf7e3af 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -1080,39 +1080,27 @@ max: max31785@52 {
#size-cells = <0>;
fan0: fan@0 {
- compatible = "pmbus-fan";
reg = <0>;
- tach-pulses = <2>;
};
fan1: fan@1 {
- compatible = "pmbus-fan";
reg = <1>;
- tach-pulses = <2>;
};
fan2: fan@2 {
- compatible = "pmbus-fan";
reg = <2>;
- tach-pulses = <2>;
};
fan3: fan@3 {
- compatible = "pmbus-fan";
reg = <3>;
- tach-pulses = <2>;
};
fan4: fan@4 {
- compatible = "pmbus-fan";
reg = <4>;
- tach-pulses = <2>;
};
fan5: fan@5 {
- compatible = "pmbus-fan";
reg = <5>;
- tach-pulses = <2>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index b31eb8e58c6b4..6fe7023599e88 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -481,55 +481,19 @@ max31785@52 {
#size-cells = <0>;
fan@0 {
- compatible = "pmbus-fan";
reg = <0>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
};
fan@1 {
- compatible = "pmbus-fan";
reg = <1>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
};
fan@2 {
- compatible = "pmbus-fan";
reg = <2>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
};
fan@3 {
- compatible = "pmbus-fan";
reg = <3>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-dual-tach;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
};
};
--
2.51.0
prev parent reply other threads:[~2025-09-22 17:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-22 17:57 [PATCH v7 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-22 17:57 ` [PATCH v7 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-09-22 17:57 ` [PATCH v7 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
2025-09-22 17:58 ` [PATCH v7 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
2025-09-22 17:58 ` [PATCH v7 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
2025-09-22 17:58 ` [PATCH v7 5/7] dt-bindings: hwmon: max31790: Use addressed fan nodes Eddie James
2025-09-22 20:58 ` Rob Herring (Arm)
2025-09-22 17:58 ` [PATCH v7 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-26 0:03 ` Andrew Jeffery
2025-09-29 14:52 ` Eddie James
2025-10-01 2:29 ` Andrew Jeffery
2025-09-22 17:58 ` Eddie James [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250922175804.31679-8-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).