From: Frank Li <Frank.Li@nxp.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Shawn Guo <shawnguo@kernel.org>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
bjorn.andersson@oss.qualcomm.com, Frank Li <Frank.Li@nxp.com>,
Ze Huang <huang.ze@linux.dev>
Subject: [PATCH v2 2/3] usb: dwc3: dwc3-generic-plat: add layerscape dwc3 support
Date: Tue, 23 Sep 2025 16:22:49 -0400 [thread overview]
Message-ID: <20250923-ls_dma_coherence-v2-2-ce3176396bdb@nxp.com> (raw)
In-Reply-To: <20250923-ls_dma_coherence-v2-0-ce3176396bdb@nxp.com>
Add layerscape dwc3 support by using flatten dwc3 core library. Layerscape
dwc3 need set software managed property snps,gsbuscfg0-reqinfo as 0x2222
when dma-coherence set.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/usb/dwc3/dwc3-generic-plat.c | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index d96b20570002dc619ea813f4d6a8013636a0f346..d886b6e557b12edda71203e4f640a9a0a53b4f35 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -8,10 +8,15 @@
*/
#include <linux/clk.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include "glue.h"
+struct dwc3_generic_drvdata {
+ u32 gsbuscfg0;
+};
+
struct dwc3_generic {
struct device *dev;
struct dwc3 dwc;
@@ -29,6 +34,7 @@ static void dwc3_generic_reset_control_assert(void *data)
static int dwc3_generic_probe(struct platform_device *pdev)
{
+ const struct dwc3_generic_drvdata *drvdata;
struct dwc3_probe_data probe_data = {};
struct device *dev = &pdev->dev;
struct dwc3_generic *dwc3g;
@@ -41,6 +47,8 @@ static int dwc3_generic_probe(struct platform_device *pdev)
dwc3g->dev = dev;
+ drvdata = of_device_get_match_data(dev);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "missing memory resource\n");
@@ -70,6 +78,17 @@ static int dwc3_generic_probe(struct platform_device *pdev)
if (ret < 0)
return dev_err_probe(dev, ret, "failed to get clocks\n");
+ if (of_dma_is_coherent(pdev->dev.of_node)) {
+ struct property_entry props[2] = {};
+
+ props[0] = PROPERTY_ENTRY_U16("snps,gsbuscfg0-reqinfo", drvdata->gsbuscfg0);
+
+ ret = device_create_managed_software_node(dev, props, NULL);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "fail create software managed property node\n");
+ }
+
dwc3g->num_clocks = ret;
dwc3g->dwc.dev = dev;
probe_data.dwc = &dwc3g->dwc;
@@ -145,8 +164,17 @@ static const struct dev_pm_ops dwc3_generic_dev_pm_ops = {
dwc3_generic_runtime_idle)
};
+static const struct dwc3_generic_drvdata spacemit_k1_dwc3 = {
+ .gsbuscfg0 = DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED,
+};
+
+static const struct dwc3_generic_drvdata fsl_ls1028_dwc3 = {
+ .gsbuscfg0 = 0x2222,
+};
+
static const struct of_device_id dwc3_generic_of_match[] = {
- { .compatible = "spacemit,k1-dwc3", },
+ { .compatible = "spacemit,k1-dwc3", &spacemit_k1_dwc3},
+ { .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);
--
2.34.1
next prev parent reply other threads:[~2025-09-23 20:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-23 20:22 [PATCH v2 0/3] usb: dwc3: add layerscape platform driver use flatten dwc3 core Frank Li
2025-09-23 20:22 ` [PATCH v2 1/3] dt-bindings: usb: add missed compatible string for arm64 layerscape Frank Li
2025-09-23 20:22 ` Frank Li [this message]
2025-09-24 22:13 ` [PATCH v2 2/3] usb: dwc3: dwc3-generic-plat: add layerscape dwc3 support Thinh Nguyen
2025-09-25 4:09 ` Frank Li
2025-09-25 23:42 ` Thinh Nguyen
2025-09-25 23:47 ` Thinh Nguyen
2025-09-23 20:22 ` [PATCH v2 3/3] arm64: dts: layerscape: add dma-coherent for usb node Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250923-ls_dma_coherence-v2-2-ce3176396bdb@nxp.com \
--to=frank.li@nxp.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=bjorn.andersson@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=huang.ze@linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox