[PATCH 06/20] arm64: dts: qcom: kaanapali: Add USB support for Kaanapali SoC

[Jingyi Wang <jingyi.wang@oss.qualcomm.com>]

From: Ronak Raheja <ronak.raheja@oss.qualcomm.com>

Add the base USB devicetree definitions for Kaanapali platform. The overall
chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
(rev. v8) and M31 eUSB2 PHY.

Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali.dtsi | 155 ++++++++++++++++++++++++++++++++
 1 file changed, 155 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index ae1721cfbffc..08ab267bf9a7 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interconnect/qcom,kaanapali-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -958,6 +959,160 @@ opp-202000000 {
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,kaanapali-m31-eusb2-phy",
+				     "qcom,sm8750-m31-eusb2-phy";
+			reg = <0x0 0x88e3000 0x0 0x29c>;
+
+			clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,kaanapali-qmp-usb3-dp-phy",
+				     "qcom,sm8750-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&tcsrcc TCSR_USB3_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,kaanapali-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr", "apps-usb";
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+			dma-coherent;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,kaanapali-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x10000>,

-- 
2.25.1