devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Pankaj Patil <pankaj.patil@oss.qualcomm.com>,
	Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>,
	Qiang Yu <qiang.yu@oss.qualcomm.com>
Subject: [PATCH 19/24] arm64: dts: qcom: glymur: Add support for PCIe5
Date: Thu, 25 Sep 2025 12:02:27 +0530	[thread overview]
Message-ID: <20250925-v3_glymur_introduction-v1-19-24b601bbecc0@oss.qualcomm.com> (raw)
In-Reply-To: <20250925-v3_glymur_introduction-v1-0-24b601bbecc0@oss.qualcomm.com>

From: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>

Describe PCIe5 controller and PHY. Also add required system resources like
regulators, clocks, interrupts and registers configuration for PCIe5.

Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 208 ++++++++++++++++++++++++++++++++++-
 1 file changed, 207 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index e6e001485747785fd29c606773cba7793bbd2a5c..17a07d33b9396dba00e61a3b4260fa1a535600f2 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -951,7 +951,7 @@ gcc: clock-controller@100000 {
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>;
+				 <&pcie5_phy>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2511,6 +2511,212 @@ pcie_west_slv_noc: interconnect@1920000 {
 			#interconnect-cells = <2>;
 		};
 
+		pcie5: pci@1b40000 {
+			device_type = "pci";
+			compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100";
+			reg = <0x0 0x01b40000 0x0 0x3000>,
+			      <0x7 0xa0000000 0x0 0xf20>,
+			      <0x7 0xa0000f40 0x0 0xa8>,
+			      <0x7 0xb0000000 0x0 0x4000>,
+			      <0x7 0xa0100000 0x0 0x100000>,
+			      <0x0 0x01b43000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x02000000 0 0x7a000000 0 0x7a000000 0 0x4000000>;
+			bus-range = <0 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <4>;
+			max-link-speed = <5>;
+
+			operating-points-v2 = <&pcie5_opp_table>;
+
+			msi-map = <0x0 &gic_its 0xd0000 0x10000>;
+
+			interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 428 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 429 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_5_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_5_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_5_EAST_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr";
+
+			assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_east_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
+					&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					&pcie_east_slv_noc SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_5_BCR>,
+				 <&gcc GCC_PCIE_5_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_5_GDSC>;
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+			eq-presets-32gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
+			status = "disabled";
+
+			pcie5_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 1 x4 and GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 2 x4 */
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <2000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 3 x4, GEN 4 x2 and GEN5 x1*/
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+
+				/* GEN 4 x4 and GEN 5 x2 */
+				opp-64000000 {
+					opp-hz = /bits/ 64 <64000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <7876000 1>;
+				};
+
+				/* GEN 5 x4 */
+				opp-128000000 {
+					opp-hz = /bits/ 64 <128000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <15753000 1>;
+				};
+			};
+
+			pcie5port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				phys = <&pcie5_phy>;
+			};
+		};
+
+		pcie5_phy: phy@1b50000 {
+			compatible = "qcom,glymur-qmp-gen5x4-pcie-phy";
+			reg = <0x0 0x01b50000 0x0 0x10000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_5_AUX_CLK>,
+				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+				 <&tcsrcc TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_5_PIPE_CLK>,
+				 <&gcc GCC_PCIE_5_PIPE_DIV2_CLK>;
+			clock-names = "aux",
+					"cfg_ahb",
+					"ref",
+					"rchng",
+					"pipe",
+					"pipediv2";
+
+			resets = <&gcc GCC_PCIE_5_PHY_BCR>,
+				 <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie5_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x20000>;

-- 
2.34.1


  parent reply	other threads:[~2025-09-25  6:34 UTC|newest]

Thread overview: 131+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-25  6:32 [PATCH 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Pankaj Patil
2025-09-25  6:32 ` [PATCH 01/24] dt-bindings: arm: qcom: Document Glymur SoC and board Pankaj Patil
2025-09-25  6:32 ` [PATCH 02/24] arm64: defconfig: Enable Glymur configs for boot to shell Pankaj Patil
2025-09-25 17:31   ` Dmitry Baryshkov
2025-10-08 11:26     ` Pankaj Patil
2025-10-08 12:56       ` Dmitry Baryshkov
2025-09-25  6:32 ` [PATCH 03/24] arm64: dts: qcom: Introduce Glymur base dtsi and CRD dts Pankaj Patil
2025-09-25 10:16   ` Konrad Dybcio
2025-10-29 10:00     ` Taniya Das
2025-10-29 10:36       ` Dmitry Baryshkov
2025-10-30 10:44         ` Taniya Das
2025-10-30 11:09           ` Dmitry Baryshkov
2025-10-30 17:10             ` Taniya Das
2025-09-25 13:02   ` Marc Zyngier
2025-10-08 11:30     ` Pankaj Patil
2025-09-25 17:44   ` Dmitry Baryshkov
2025-10-08 11:36     ` Pankaj Patil
2025-10-08 15:55       ` Dmitry Baryshkov
2025-10-10  7:50   ` Abel Vesa
2025-09-25  6:32 ` [PATCH 04/24] arm64: dts: qcom: glymur: Add QUPv3 configuration for serial engines Pankaj Patil
2025-09-25 10:18   ` Konrad Dybcio
2025-09-25 17:46     ` Dmitry Baryshkov
2025-10-15 10:28     ` Jyothi Kumar Seerapu
2025-10-15 13:33       ` Dmitry Baryshkov
2025-10-15 14:12         ` Jyothi Kumar Seerapu
2025-10-15 19:53           ` Dmitry Baryshkov
2025-10-20 11:54       ` Konrad Dybcio
     [not found]     ` <5931e2eb-5f2d-49bb-8b9c-b49f77d7fcbf@oss.qualcomm.com>
2025-10-30 10:56       ` Konrad Dybcio
2025-10-11 11:06   ` Abel Vesa
2025-10-11 11:11     ` Abel Vesa
2025-10-12  2:46       ` Krzysztof Kozlowski
2025-10-15 10:33       ` Jyothi Kumar Seerapu
2025-10-11 11:16   ` Abel Vesa
2025-10-15 10:53     ` Jyothi Kumar Seerapu
2025-09-25  6:32 ` [PATCH 05/24] arm64: dts: qcom: glymur: Add cpu idle states Pankaj Patil
2025-09-25 10:25   ` Konrad Dybcio
2025-10-13  9:29     ` Maulik Shah (mkshah)
2025-10-06 14:26   ` Krzysztof Kozlowski
2025-10-08 11:37     ` Pankaj Patil
2025-09-25  6:32 ` [PATCH 06/24] arm64: dts: qcom: glymur: Enable pdp0 mailbox Pankaj Patil
2025-09-25  8:23   ` Krzysztof Kozlowski
2025-09-25 17:06     ` Bjorn Andersson
2025-09-25 18:49       ` Dmitry Baryshkov
2025-09-25 10:29   ` Konrad Dybcio
2025-10-09 10:43     ` Sibi Sankar
2025-10-20 11:51       ` Konrad Dybcio
2025-09-25  6:32 ` [PATCH 07/24] arm64: dts: qcom: glymur: Enable cpu dvfs for CPU scaling Pankaj Patil
2025-09-25  8:06   ` Krzysztof Kozlowski
2025-09-25 17:26   ` Bjorn Andersson
2025-09-25  6:32 ` [PATCH 08/24] arm64: dts: qcom: glymur: Enable ipcc and aoss nodes Pankaj Patil
2025-09-25 11:00   ` Konrad Dybcio
2025-09-25  6:32 ` [PATCH 09/24] arm64: dts: qcom: glymur-crd: Add RPMH regulator rails Pankaj Patil
2025-09-25 11:01   ` Konrad Dybcio
2025-10-15 15:40     ` Kamal Wadhwa
2025-10-20 11:53       ` Konrad Dybcio
2025-09-25 17:09   ` Bjorn Andersson
2025-10-08 11:42     ` Pankaj Patil
2025-10-11 11:31   ` Abel Vesa
2025-10-11 15:56     ` Dmitry Baryshkov
2025-09-25  6:32 ` [PATCH 10/24] arm64: dts: qcom: glymur: Add SPMI PMIC arbiter device Pankaj Patil
2025-09-25 10:31   ` Konrad Dybcio
2025-10-06 14:27   ` Krzysztof Kozlowski
2025-09-25  6:32 ` [PATCH 11/24] arm64: dts: qcom: Add PMCX0102 pmic dtsi Pankaj Patil
2025-09-25  6:32 ` [PATCH 12/24] arm64: dts: qcom: Add SMB2370 " Pankaj Patil
2025-09-25  6:32 ` [PATCH 13/24] arm64: dts: qcom: Update pmh0104 dtsi for Glymur CRD Pankaj Patil
2025-09-25  6:32 ` [PATCH 14/24] arm64: dts: qcom: Update the pmh0110.dtsi for Glymur Pankaj Patil
2025-09-25  8:08   ` Krzysztof Kozlowski
2025-09-25 13:14     ` Dmitry Baryshkov
2025-09-25 13:34       ` Krzysztof Kozlowski
2025-09-25 14:00         ` Konrad Dybcio
2025-09-25 18:57         ` Dmitry Baryshkov
2025-10-08  7:31           ` Kamal Wadhwa
2025-10-08  8:02             ` Krzysztof Kozlowski
2025-10-08 11:25               ` Krzysztof Kozlowski
2025-10-10 11:26                 ` Kamal Wadhwa
2025-10-08  9:15             ` Konrad Dybcio
2025-10-10 12:08               ` Aiqun(Maria) Yu
2025-09-25  6:32 ` [PATCH 15/24] arm64: dts: qcom: glymur: Add PMICs dtsi for CRD Pankaj Patil
2025-09-25  6:32 ` [PATCH 16/24] arm64: boot: dts: glymur-crd: Add Volume down/up keys support Pankaj Patil
2025-09-25 11:16   ` Konrad Dybcio
2025-10-01 13:48     ` Kamal Wadhwa
2025-10-06  8:56       ` Konrad Dybcio
2025-10-06 14:28   ` Krzysztof Kozlowski
2025-09-25  6:32 ` [PATCH 17/24] arm64: dts: qcom: glymur-crd: Avoid RTC probe failure Pankaj Patil
2025-09-25  8:11   ` Krzysztof Kozlowski
2025-10-01 12:23     ` Kamal Wadhwa
2025-10-06 14:28       ` Konrad Dybcio
2025-10-13 11:04         ` Kamal Wadhwa
2025-10-14 10:23           ` Konrad Dybcio
2025-10-14 12:36             ` Kamal Wadhwa
2025-10-14 19:52               ` Dmitry Baryshkov
2025-10-20 11:54               ` Konrad Dybcio
2025-10-06 14:32       ` Krzysztof Kozlowski
2025-09-25  6:32 ` [PATCH 18/24] arm64: dts: qcom: glymur: Add PMIC glink node Pankaj Patil
2025-09-25  8:13   ` Krzysztof Kozlowski
2025-09-25 10:32   ` Konrad Dybcio
2025-10-08 11:55     ` Pankaj Patil
2025-11-03 10:26       ` Kamal Wadhwa
2025-11-10 14:06         ` Kamal Wadhwa
2025-11-12 14:13           ` Konrad Dybcio
2025-09-25  6:32 ` Pankaj Patil [this message]
2025-09-25  8:15   ` [PATCH 19/24] arm64: dts: qcom: glymur: Add support for PCIe5 Krzysztof Kozlowski
2025-09-25 11:32   ` Konrad Dybcio
2025-10-10  7:02     ` Qiang Yu
2025-10-08 13:36   ` Abel Vesa
2025-10-10  7:08     ` Qiang Yu
2025-10-11 11:43       ` Abel Vesa
2025-10-11 15:57         ` Dmitry Baryshkov
2025-10-11 18:12           ` Abel Vesa
2025-09-25  6:32 ` [PATCH 20/24] arm64: dts: qcom: glymur-crd: Add power supply and sideband signal for pcie5 Pankaj Patil
2025-09-25 11:09   ` Konrad Dybcio
2025-10-09  9:53   ` Abel Vesa
2025-10-10  7:13     ` Qiang Yu
2025-09-25  6:32 ` [PATCH 21/24] arm64: dts: qcom: glymur: Enable tsens and thermal zone nodes Pankaj Patil
2025-09-25 11:15   ` Konrad Dybcio
2025-11-19 13:10     ` Manaf Meethalavalappu Pallikunhi
2025-09-25  6:32 ` [PATCH 22/24] arm64: dts: qcom: glymur: Add display clock controller device Pankaj Patil
2025-09-25  8:18   ` Krzysztof Kozlowski
2025-09-29  3:57     ` Taniya Das
2025-09-25 10:33   ` Konrad Dybcio
2025-09-29  3:54     ` Taniya Das
2025-10-09  5:12       ` Taniya Das
2025-10-09  8:30         ` Konrad Dybcio
2025-09-25  6:32 ` [PATCH 23/24] arm64: dts: qcom: glymur: Add USB support Pankaj Patil
2025-09-25 11:06   ` Konrad Dybcio
2025-09-25 13:19   ` Abel Vesa
2025-11-03 15:26   ` Abel Vesa
2025-11-03 17:00   ` Abel Vesa
2025-09-25  6:32 ` [PATCH 24/24] arm64: dts: qcom: glymur: Add remoteprocs Pankaj Patil
2025-09-25 17:30 ` [PATCH 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Dmitry Baryshkov
2025-10-08 12:18   ` Pankaj Patil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250925-v3_glymur_introduction-v1-19-24b601bbecc0@oss.qualcomm.com \
    --to=pankaj.patil@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=qiang.yu@oss.qualcomm.com \
    --cc=quic_pyarlaga@quicinc.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).