From: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Pankaj Patil <pankaj.patil@oss.qualcomm.com>,
Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Subject: [PATCH v2 12/24] arm64: dts: qcom: Add SMB2370 pmic dtsi
Date: Thu, 25 Sep 2025 11:58:18 +0530 [thread overview]
Message-ID: <20250925-v3_glymur_introduction-v2-12-8e1533a58d2d@oss.qualcomm.com> (raw)
In-Reply-To: <20250925-v3_glymur_introduction-v2-0-8e1533a58d2d@oss.qualcomm.com>
From: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Add base DTS file for SMB2370 along with the eUSB repeater
node.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/smb2370.dtsi | 45 +++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/smb2370.dtsi b/arch/arm64/boot/dts/qcom/smb2370.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..80f3fdae5705044b5bd422ac3fc3a6fa6b0fc23c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/smb2370.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+&spmi_bus2 {
+ smb2370_j_e2: pmic@9 {
+ compatible = "qcom,smb2370", "qcom,spmi-pmic";
+ reg = <0x9 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2370_j_e2_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2370-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+
+ smb2370_k_e2: pmic@a {
+ compatible = "qcom,smb2370", "qcom,spmi-pmic";
+ reg = <0xa SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2370_k_e2_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2370-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+
+ smb2370_l_e2: pmic@b {
+ compatible = "qcom,smb2370", "qcom,spmi-pmic";
+ reg = <0xb SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2370_l_e2_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2370-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+};
--
2.34.1
next prev parent reply other threads:[~2025-09-25 6:29 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-25 6:28 [PATCH v2 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 01/24] dt-bindings: arm: qcom: Document Glymur SoC and board Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 02/24] arm64: defconfig: Enable Glymur configs for boot to shell Pankaj Patil
2025-09-25 21:09 ` Dmitry Baryshkov
2025-09-25 6:28 ` [PATCH v2 03/24] arm64: dts: qcom: Introduce Glymur base dtsi and CRD dts Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 04/24] arm64: dts: qcom: glymur: Add QUPv3 configuration for serial engines Pankaj Patil
2025-09-25 21:16 ` Dmitry Baryshkov
2025-10-15 10:47 ` Jyothi Kumar Seerapu
2025-09-25 6:28 ` [PATCH v2 05/24] arm64: dts: qcom: glymur: Add cpu idle states Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 06/24] arm64: dts: qcom: glymur: Enable pdp0 mailbox Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 07/24] arm64: dts: qcom: glymur: Enable cpu dvfs for CPU scaling Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 08/24] arm64: dts: qcom: glymur: Enable ipcc and aoss nodes Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 09/24] arm64: dts: qcom: glymur-crd: Add RPMH regulator rails Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 10/24] arm64: dts: qcom: glymur: Add SPMI PMIC arbiter device Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 11/24] arm64: dts: qcom: Add PMCX0102 pmic dtsi Pankaj Patil
2025-09-25 6:28 ` Pankaj Patil [this message]
2025-09-25 6:28 ` [PATCH v2 13/24] arm64: dts: qcom: Update pmh0104 dtsi for Glymur CRD Pankaj Patil
2025-09-25 7:55 ` Krzysztof Kozlowski
2025-09-26 7:07 ` Pankaj Patil
2025-09-26 8:55 ` Konrad Dybcio
2025-09-25 6:28 ` [PATCH v2 14/24] arm64: dts: qcom: Update the pmh0110.dtsi for Glymur Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 15/24] arm64: dts: qcom: glymur: Add PMICs dtsi for CRD Pankaj Patil
2025-09-25 8:15 ` Abel Vesa
2025-09-30 14:22 ` Kamal Wadhwa
2025-09-25 6:28 ` [PATCH v2 16/24] arm64: boot: dts: glymur-crd: Add Volume down/up keys support Pankaj Patil
2025-09-25 13:45 ` Krzysztof Kozlowski
2025-09-25 6:28 ` [PATCH v2 17/24] arm64: dts: qcom: glymur-crd: Avoid RTC probe failure Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 18/24] arm64: dts: qcom: glymur: Add PMIC glink node Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 19/24] arm64: dts: qcom: glymur: Add support for PCIe5 Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 20/24] arm64: dts: qcom: glymur-crd: Add power supply and sideband signal for pcie5 Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 21/24] arm64: dts: qcom: glymur: Enable tsens and thermal zone nodes Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 22/24] arm64: dts: qcom: glymur: Add display clock controller device Pankaj Patil
2025-09-25 6:28 ` [PATCH v2 23/24] arm64: dts: qcom: glymur: Add USB support Pankaj Patil
2025-09-25 8:06 ` Abel Vesa
2025-09-25 10:54 ` Abel Vesa
2025-09-25 10:59 ` Konrad Dybcio
2025-09-25 11:29 ` Abel Vesa
2025-09-26 1:09 ` Wesley Cheng
2025-10-01 8:42 ` Konrad Dybcio
2025-09-25 20:42 ` Dmitry Baryshkov
2025-09-25 6:28 ` [PATCH v2 24/24] arm64: dts: qcom: glymur: Add remoteprocs Pankaj Patil
2025-09-25 6:35 ` [PATCH v2 00/24] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Pankaj Patil
2025-09-25 21:06 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250925-v3_glymur_introduction-v2-12-8e1533a58d2d@oss.qualcomm.com \
--to=pankaj.patil@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kamal.wadhwa@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).