[PATCH v3 2/4] iio: mpl3115: use guards from cleanup.h

[Antoni Pokusinski <apokusinski01@gmail.com>]

Include linux/cleanup.h and use the scoped_guard() to simplify the code.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/iio/pressure/mpl3115.c | 42 +++++++++++++++-------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c
index 579da60ef441..80af672f65c6 100644
--- a/drivers/iio/pressure/mpl3115.c
+++ b/drivers/iio/pressure/mpl3115.c
@@ -10,14 +10,16 @@
  * interrupts, user offset correction, raw mode
  */
 
-#include <linux/module.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
+
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/triggered_buffer.h>
-#include <linux/delay.h>
 
 #define MPL3115_STATUS 0x00
 #define MPL3115_OUT_PRESS 0x01 /* MSB first, 20 bit */
@@ -163,32 +165,26 @@ static irqreturn_t mpl3115_trigger_handler(int irq, void *p)
 	u8 buffer[16] __aligned(8) = { };
 	int ret, pos = 0;
 
-	mutex_lock(&data->lock);
-	ret = mpl3115_request(data);
-	if (ret < 0) {
-		mutex_unlock(&data->lock);
-		goto done;
-	}
-
-	if (test_bit(0, indio_dev->active_scan_mask)) {
-		ret = i2c_smbus_read_i2c_block_data(data->client,
-			MPL3115_OUT_PRESS, 3, &buffer[pos]);
-		if (ret < 0) {
-			mutex_unlock(&data->lock);
+	scoped_guard(mutex, &data->lock) {
+		ret = mpl3115_request(data);
+		if (ret < 0)
 			goto done;
+
+		if (test_bit(0, indio_dev->active_scan_mask)) {
+			ret = i2c_smbus_read_i2c_block_data(data->client,
+				MPL3115_OUT_PRESS, 3, &buffer[pos]);
+			if (ret < 0)
+				goto done;
+			pos += 4;
 		}
-		pos += 4;
-	}
 
-	if (test_bit(1, indio_dev->active_scan_mask)) {
-		ret = i2c_smbus_read_i2c_block_data(data->client,
-			MPL3115_OUT_TEMP, 2, &buffer[pos]);
-		if (ret < 0) {
-			mutex_unlock(&data->lock);
-			goto done;
+		if (test_bit(1, indio_dev->active_scan_mask)) {
+			ret = i2c_smbus_read_i2c_block_data(data->client,
+				MPL3115_OUT_TEMP, 2, &buffer[pos]);
+			if (ret < 0)
+				goto done;
 		}
 	}
-	mutex_unlock(&data->lock);
 
 	iio_push_to_buffers_with_ts(indio_dev, buffer, sizeof(buffer),
 				    iio_get_time_ns(indio_dev));
-- 
2.25.1