* [PATCH 1/2] dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie
2025-09-30 13:20 [PATCH 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree Erikas Bitovtas
@ 2025-09-30 13:20 ` Erikas Bitovtas
2025-10-08 1:52 ` Rob Herring (Arm)
2025-09-30 13:20 ` [PATCH 2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree Erikas Bitovtas
2025-09-30 14:39 ` [PATCH 0/2] " Rob Herring (Arm)
2 siblings, 1 reply; 7+ messages in thread
From: Erikas Bitovtas @ 2025-09-30 13:20 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
Cc: phone-devel, ~postmarketos/upstreaming, Erikas Bitovtas
Add a compatible for Asus ZenFone 2 Laser/Selfie (1080p)
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 18b5ed044f9f..1ad77a68fc11 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -88,6 +88,7 @@ properties:
- items:
- enum:
+ - asus,z00t
- huawei,kiwi
- longcheer,l9100
- samsung,a7
--
2.51.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree
2025-09-30 13:20 [PATCH 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree Erikas Bitovtas
2025-09-30 13:20 ` [PATCH 1/2] dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie Erikas Bitovtas
@ 2025-09-30 13:20 ` Erikas Bitovtas
2025-10-08 3:29 ` Dmitry Baryshkov
2025-10-08 11:38 ` Konrad Dybcio
2025-09-30 14:39 ` [PATCH 0/2] " Rob Herring (Arm)
2 siblings, 2 replies; 7+ messages in thread
From: Erikas Bitovtas @ 2025-09-30 13:20 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
Cc: phone-devel, ~postmarketos/upstreaming, Erikas Bitovtas
Add an initial device tree for Asus ZenFone 2 Laser/Selfie. This
includes support for:
- UART
- USB
- Internal storage
- MicroSD
- Volume keys
- Touchscreen: Focaltech FT5306
- Accelerometer: Invensense MPU6515
- Magnetometer: Asahi Kasei AK09911
- Vibrator
- Audio input and output
- Modem
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 255 ++++++++++++++++++
2 files changed, 256 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 296688f7cb26..35f3ff0d6f18 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
new file mode 100644
index 000000000000..687ba02a8139
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Asus ZenFone 2 Laser/Selfie (1080p)";
+ compatible = "asus,z00t", "qcom,msm8939";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2;
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+
+ button-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reg_sd_vmmc: regulator-sdcard-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "sdcard-vmmc";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ startup-delay-us = <200>;
+
+ pinctrl-0 = <&sd_vmmc_en_default>;
+ pinctrl-names = "default";
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l8>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&mag_reset_default>;
+ pinctrl-names = "default";
+ };
+
+ imu@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+
+ interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l8>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&imu_default>;
+ pinctrl-names = "default";
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&pm8916_l8>;
+ iovcc-supply = <&pm8916_l6>;
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_uart2 {
+ pinctrl-0 = <&blsp_uart2_console_default>;
+ pinctrl-1 = <&blsp_uart2_console_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ qcom,micbias1-ext-cap;
+ qcom,hphl-jack-type-normally-open;
+ status = "okay";
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <®_sd_vmmc>;
+
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3660b";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ imu_default: imu-default-state {
+ pins = "gpio36";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default-state {
+ pins = "gpio112";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sd_vmmc_en_default: sd-vmmc-en-default-state {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ touch-pins {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ reset-pins {
+ pins = "gpio12";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
--
2.51.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree
2025-09-30 13:20 [PATCH 0/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree Erikas Bitovtas
2025-09-30 13:20 ` [PATCH 1/2] dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie Erikas Bitovtas
2025-09-30 13:20 ` [PATCH 2/2] arm64: dts: qcom: msm8939-asus-z00t: add initial device tree Erikas Bitovtas
@ 2025-09-30 14:39 ` Rob Herring (Arm)
2 siblings, 0 replies; 7+ messages in thread
From: Rob Herring (Arm) @ 2025-09-30 14:39 UTC (permalink / raw)
To: Erikas Bitovtas
Cc: Bjorn Andersson, phone-devel, linux-arm-msm, Konrad Dybcio,
Conor Dooley, ~postmarketos/upstreaming, Krzysztof Kozlowski,
devicetree, linux-kernel
On Tue, 30 Sep 2025 16:20:08 +0300, Erikas Bitovtas wrote:
> This dts adds support for Asus ZenFone 2 Laser/Selfie (1080p) smartphone
> released in 2015.
>
> Add an initial device tree support for Z00T with support for:
> - GPIO keys
> - SDHCI (Internal and external storage)
> - WCNSS (WiFi/BT)
> - Sensors (accelerometer and magnetometer)
> - Touchscreen
> - Audio input and output
> - Vibrator
>
> Erikas Bitovtas (2):
> dt-bindings: arm: qcom: Add Asus ZenFone 2 Laser/Selfie
> arm64: dts: qcom: msm8939-asus-z00t: add initial device tree
>
> .../devicetree/bindings/arm/qcom.yaml | 1 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 255 ++++++++++++++++++
> 3 files changed, 257 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
>
> --
> 2.51.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250929 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250930132556.266434-1-xerikasxx@gmail.com:
arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dtb: iommu@1f08000 (qcom,msm8916-iommu): clock-names: ['iface', 'bus', 'tbu'] is too long
from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dtb: iommu@1f08000 (qcom,msm8916-iommu): clocks: [[31, 129], [31, 140], [31, 175]] is too long
from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
^ permalink raw reply [flat|nested] 7+ messages in thread