[PATCH v3 0/2] Add Meta (Facebook) Yosemite5 BMC (AST2600)

[PATCH v3 0/2] Add Meta (Facebook) Yosemite5 BMC (AST2600)

[Kevin Tung]

Summary:
Add device tree for the Meta (Facebook) Yosemite5 compute node,
based on the AST2600 BMC.

The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components. The BMC also
logs relevant events and performs appropriate system actions in
response to abnormal conditions.

Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
---
Changes in v3:
- add missing dtb target in arch/arm/boot/dts/aspeed/Makefile
- remove unevaluated property `ncsi-package`
- Link to v2: https://lore.kernel.org/r/20250924-yv5_add_dts-v2-0-39a4a8e3c9e6@gmail.com

Changes in v2:
- send v2 of the series so that it's properly threaded.
- add idle disconnect to i2c mux.
- Link to v1: https://lore.kernel.org/all/20250917074812.4042797-1-kevin.tung.openbmc@gmail.com

---
Kevin Tung (2):
      dt-bindings: arm: aspeed: add Meta Yosemite5 board
      ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |    1 +
 arch/arm/boot/dts/aspeed/Makefile                  |    1 +
 .../dts/aspeed/aspeed-bmc-facebook-yosemite5.dts   | 1067 ++++++++++++++++++++
 3 files changed, 1069 insertions(+)
---
base-commit: 30d4efb2f5a515a60fe6b0ca85362cbebea21e2f
change-id: 20250924-yv5_add_dts-9268ac14dfc0

Best regards,
-- 
Kevin Tung <kevin.tung.openbmc@gmail.com>

[PATCH v3 1/2] dt-bindings: arm: aspeed: add Meta Yosemite5 board

[Kevin Tung]

Document the new compatibles used on Meta Yosemite5.

Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 456dbf7b5ec8f4442be815284e1ad085287dc443..6f2b12f96bd6ce31b4175e109a78d931dffdfe28 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -89,6 +89,7 @@ properties:
               - facebook,minerva-cmc
               - facebook,santabarbara-bmc
               - facebook,yosemite4-bmc
+              - facebook,yosemite5-bmc
               - ibm,blueridge-bmc
               - ibm,everest-bmc
               - ibm,fuji-bmc

-- 
2.51.0

[PATCH v3 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC

[Kevin Tung]

Add device tree for the Meta (Facebook) Yosemite5 compute node,
based on the AST2600 BMC.

The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components. The BMC also
logs relevant events and performs appropriate system actions in
response to abnormal conditions.

Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/Makefile                  |    1 +
 .../dts/aspeed/aspeed-bmc-facebook-yosemite5.dts   | 1067 ++++++++++++++++++++
 2 files changed, 1068 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index aba7451ab749f4938aa56ffe332a94e04a55eb52..8842825acb5b509b51152af513671d038e369254 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
 	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-facebook-yosemite5.dtb \
 	aspeed-bmc-ibm-blueridge.dtb \
 	aspeed-bmc-ibm-bonnell.dtb \
 	aspeed-bmc-ibm-everest.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
new file mode 100644
index 0000000000000000000000000000000000000000..2486981f3d6bd36f3fe780b21e834b85242f8aa9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 5 BMC";
+	compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c5mux0ch0;
+		i2c17 = &i2c5mux0ch1;
+		i2c18 = &i2c5mux0ch2;
+		i2c19 = &i2c5mux0ch3;
+		i2c20 = &i2c5mux1ch0;
+		i2c21 = &i2c5mux1ch1;
+		i2c22 = &i2c5mux1ch2;
+		i2c23 = &i2c5mux1ch3;
+		i2c24 = &i2c6mux0ch0;
+		i2c25 = &i2c6mux0ch1;
+		i2c26 = &i2c6mux0ch2;
+		i2c27 = &i2c6mux0ch3;
+		i2c28 = &i2c8mux0ch0;
+		i2c29 = &i2c8mux0ch1;
+		i2c30 = &i2c8mux0ch2;
+		i2c31 = &i2c8mux0ch3;
+		i2c32 = &i2c30mux0ch0;
+		i2c33 = &i2c30mux0ch1;
+		i2c34 = &i2c30mux0ch2;
+		i2c35 = &i2c30mux0ch3;
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+					  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+					  <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
+			"IOEXP_INT_3V3","FM_ID_LED","","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_BMC_MUX1_SEL","","","",
+			"","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
+			"SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1","led-postcode-2",
+			"led-postcode-3","led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
+			"PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
+			"RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
+			"I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
+	/*R0-R7*/	"THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
+			"CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"FM_DBP_BMC_PRDY_N","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
+			"BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
+	/*X0-X7*/	"","FM_DBP_CPU_PREQ_GF_N","","","","","","",
+	/*Y0-Y7*/	"","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","FM_BOARD_BMC_REV_ID0",
+			"FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
+};
+
+/* MB CPLD I2C */
+&i2c0 {
+	status = "okay";
+};
+
+/* CPU I2C */
+&i2c1 {
+	status = "okay";
+};
+
+/* MCIO 2A I2C */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* Socket 0 SBRMI */
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	/* Socket 0 SBTSI */
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	/* OCP NIC TEMP */
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	/* OCP NIC FRU EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* I2C MUX for MCIO 1A */
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	/* I2C MUX for MCIO 0A */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* I2C MUX for PWRPIC #13 ~ #16 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #13 */
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #14 */
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #16 */
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #15 */
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SCM CPLD I2C */
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	power-monitor@14 {
+		compatible = "infineon,xdp710";
+		reg = <0x14>;
+	};
+
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	/* PADDLE BD IOEXP */
+	gpio-expander@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HSC_OC_GPIO0", "HSC_OC_GPIO1",
+			"HSC_OC_GPIO2", "HSC_OC_GPIO3";
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina238";
+		reg = <0x42>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@43 {
+		compatible = "lltc,ltc4287";
+		reg = <0x43>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@47 {
+		compatible = "ti,tps25990";
+		reg = <0x47>;
+		ti,rimon-micro-ohms = <430000000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* PDB FRU */
+	eeprom@56 {
+		compatible = "atmel,24c128";
+		reg = <0x56>;
+	};
+
+	/* Paddle BD FRU */
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+	};
+
+	power-monitor@58 {
+		compatible = "renesas,isl28022";
+		reg = <0x58>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@59 {
+		compatible = "renesas,isl28022";
+		reg = <0x59>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5a {
+		compatible = "renesas,isl28022";
+		reg = <0x5a>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5b {
+		compatible = "renesas,isl28022";
+		reg = <0x5b>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	psu@5c {
+		compatible = "renesas,raa228006";
+		reg = <0x5c>;
+	};
+
+	fan-controller@5e{
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	/* I2C MUX for PWRPIC #1, #2, #11, #12 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #1 */
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #2 */
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #12 (Connector to CXL BD) */
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c30mux0ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					adc@1e {
+						compatible = "ti,adc128d818";
+						reg = <0x1e>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					adc@1f {
+						compatible = "ti,adc128d818";
+						reg = <0x1f>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					/* CXL BD IOEXP */
+					gpio-expander@27 {
+						compatible = "nxp,pca9535";
+						reg = <0x27>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-line-names =
+						"IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
+						"ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
+						"ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
+						"RST_IOX_CXL_N","DEBUG_UART_SEL_0",
+						"DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
+						"JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
+						"DDR_CH13_I2C_MUX_SEL","SYS_OK",
+						"CXL_VRHOT_ALERT_R1_N","";
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp75";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4c {
+						compatible = "ti,tmp432";
+						reg = <0x4c>;
+					};
+
+					power-sensor@4d {
+						compatible = "ti,ina230";
+						reg = <0x4d>;
+						shunt-resistor = <2000>;
+					};
+
+					temperature-sensor@4e {
+						compatible = "ti,tmp75";
+						reg = <0x4e>;
+					};
+
+					/* CXL FRU */
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+					};
+				};
+
+				i2c30mux0ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		/* PWRPIC #11 */
+		i2c8mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	/* SCM FRU */
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	/* BSM FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+/* MCIO 0A I2C */
+&i2c10 {
+	status = "okay";
+
+	/* E1S EB IOEXP0 */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
+			"E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
+			"E1S_0_PWRDIS","ALERT_INA_0",
+			"","",
+			"RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
+			"E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
+			"E1S_1_PWRDIS","ALERT_INA_1",
+			"","";
+	};
+
+	/* E1S EB IOEXP1 */
+	gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
+			"P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
+			"FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
+			"PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
+			"PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
+			"","",
+			"","",
+			"PWRGD_P3V3_AUX","ALERT_TEMP";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina233";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina233";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* E1S EB FRU */
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* MB IOEXP */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
+			"ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
+			"FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
+			"FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
+			"RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
+			"","FM_BMC_RTC_RST",
+			"FM_P3V_BAT_SCALED_EN","",
+			"FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads7830";
+		reg = <0x49>;
+	};
+
+	adc@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+};
+
+/* MCIO 4A I2C */
+&i2c12 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+
+	/* CLKGEN FRU */
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+	};
+
+	/* MB FRU */
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	/* CPU FRU */
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* PROT reserve */
+&i2c14 {
+	status = "okay";
+};
+
+/* MCIO 3A I2C */
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*bit0-bit7*/
+	"PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
+	"PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
+	"PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
+	"host0-ready","FM_I3C_SPD_AH_SEL_R",
+	"PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
+	"PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
+	"PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
+	"","FM_JTAG_BMC_OE_1_R_N",
+	/*bit8-bit15*/
+	"PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
+	"PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
+	"PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
+	"PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
+	"PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
+	"PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
+	"PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
+	/*bit16-bit23*/
+	"PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
+	"PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
+	"PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
+	"IBB_BMC_SRST","RST_SMB_NIC_R_N",
+	"PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
+	"PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
+	"RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
+	"PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
+	/*bit24-bit31*/
+	"PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
+	"PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
+	"PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
+	"PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
+	"PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
+	"ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
+	"ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
+	"ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
+	/*bit32-bit39*/
+	"ALERT_INA230_E1S_1_N","",
+	"ALERT_INA230_FAN0_N","",
+	"ALERT_INA230_FAN1_N","",
+	"ALERT_INA230_FAN2_N","",
+	"ALERT_INA230_FAN3_N","",
+	"ALERT_INA230_NIC_N","",
+	"ALERT_INA230_SCM_N","",
+	"ALERT_IRQ_PMBUS_PWR11_N","",
+	/*bit40-bit47*/
+	"ALERT_MCIO2A_LEAK_DETECT_N","",
+	"ALERT_MCIO3A_LEAK_DETECT_N","",
+	"ALERT_MCIO4A_LEAK_DETECT_N","",
+	"ALERT_OC_PADDLE2_N","",
+	"ALERT_OC_PWR2_N","",
+	"ALERT_OC_PWR11_N","",
+	"ALERT_PADDLE2_SMB_N","",
+	"ALERT_PWR14_SB2_LEAK_DETECT_N","",
+	/*bit48-bit55*/
+	"ALERT_PWR14_SB3_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB2_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB3_LEAK_DETECT_N","",
+	"ALERT_SMB_MCIO0A_N","",
+	"ALERT_SMB_MCIO1A_N","",
+	"ALERT_SMB_MCIO2A_N","",
+	"ALERT_SMB_MCIO2B_N","",
+	"ALERT_SMB_MCIO3A_N","",
+	/*bit56-bit63*/
+	"ALERT_SMB_MCIO3B_N","",
+	"ALERT_SMB_MCIO4A_N","",
+	"ALERT_SMB_MCIO4B_N","",
+	"ALERT_THERMALTRIP_MCIO1A_N","",
+	"ALERT_THERMALTRIP_MCIO2A_N","",
+	"ALERT_THERMALTRIP_MCIO3A_N","",
+	"ALERT_THERMALTRIP_MCIO4A_N","",
+	"ALERT_UV_PADDLE2_N","",
+	/*bit64-bit71*/
+	"ALERT_UV_PWR2_N","",
+	"ALERT_UV_PWR11_N","",
+	"ALERT_VR_SMB_N","",
+	"FAULT_FAN_0_N","",
+	"FAULT_FAN_1_N","",
+	"FAULT_FAN_2_N","",
+	"FAULT_FAN_3_N","",
+	"FAULT_P3V3_E1S_0_N","",
+	/*bit72-bit79*/
+	"FAULT_P3V3_E1S_1_N","",
+	"FAULT_P3V3_NIC_N","",
+	"FAULT_P12V_NIC_N","",
+	"FAULT_P12V_SCM_N","",
+	"P0_I3C_APML_ALERT_L","",
+	"ALERT_INLET_TEMP_N","",
+	"FM_CPU_PROCHOT_R_N","",
+	"FM_CPU_THERMTRIP_N","",
+	/*bit80-bit87*/
+	"ALERT_OUTLET_TEMP_N","",
+	"ALERT_RTC_N","",
+	"PVDDCR_CPU0_P0_OCP_N","",
+	"PVDDCR_CPU1_P0_OCP_N","",
+	"PVDDCR_SOC_P0_OCP_N","",
+	"MB_IOEXP_INT","",
+	"E1S_0_BD_IOEXP","",
+	"E1S_1_BD_IOEXP","",
+	/*bit88-bit95*/
+	"PADDLE_BD_IOEXP_INT","",
+	"FM_BOARD_REV_ID0","",
+	"FM_BOARD_REV_ID1","",
+	"FM_BOARD_REV_ID2","",
+	"FM_VR_TYPE_ID0","",
+	"FM_VR_TYPE_ID1","",
+	"PRSNT_BOOT_N_IOEXP","",
+	"PRSNT_DATA_N_IOEXP","",
+	/*bit96-bit103*/
+	"PRSNT_NIC_N_IOEXP","",
+	"PRSNT_BOOT_N_FF","",
+	"PRSNT_MCIO1A_N_FF","",
+	"NIC_PRSNT_N","",
+	"","",
+	"","",
+	"","",
+	"","",
+	/*bit104-bit111*/
+	"","","","","","","","","","","","","","","","",
+	/*bit112-bit119*/
+	"","","","","","","","","","","","","","","","",
+	/*bit120-bit127*/
+	"","","","","","","","","","","","","","","","";
+	status = "okay";
+};
+
+/* BIOS Flash */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+/* Host Console */
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* SOL */
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+/* BMC Console */
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};

-- 
2.51.0

Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add Meta Yosemite5 board

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1096 bytes --]

On Wed, Oct 01, 2025 at 04:47:50PM +0800, Kevin Tung wrote:
> Document the new compatibles used on Meta Yosemite5.
> 
> Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>

You've repeatedly ignored my ack, so I assume you don't want it.
Maybe you want a nak instead?

> ---
>  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> index 456dbf7b5ec8f4442be815284e1ad085287dc443..6f2b12f96bd6ce31b4175e109a78d931dffdfe28 100644
> --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> @@ -89,6 +89,7 @@ properties:
>                - facebook,minerva-cmc
>                - facebook,santabarbara-bmc
>                - facebook,yosemite4-bmc
> +              - facebook,yosemite5-bmc
>                - ibm,blueridge-bmc
>                - ibm,everest-bmc
>                - ibm,fuji-bmc
> 
> -- 
> 2.51.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add Meta Yosemite5 board

[Kevin Tung]

On Thu, Oct 2, 2025 at 2:33 AM Conor Dooley <conor@kernel.org> wrote:
>
> On Wed, Oct 01, 2025 at 04:47:50PM +0800, Kevin Tung wrote:
> > Document the new compatibles used on Meta Yosemite5.
> >
> > Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
>
> You've repeatedly ignored my ack, so I assume you don't want it.
> Maybe you want a nak instead?
>

Apologies for ignoring your ack repeatedly, that was not intentional.
I truly value your review and will make sure to include it. Would you
suggest that I send a v4 to pick it up, or is it fine to carry it
forward in the next revision?
Thank you again for taking the time to review my patches.

Kevin
> > ---
> >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > index 456dbf7b5ec8f4442be815284e1ad085287dc443..6f2b12f96bd6ce31b4175e109a78d931dffdfe28 100644
> > --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > @@ -89,6 +89,7 @@ properties:
> >                - facebook,minerva-cmc
> >                - facebook,santabarbara-bmc
> >                - facebook,yosemite4-bmc
> > +              - facebook,yosemite5-bmc
> >                - ibm,blueridge-bmc
> >                - ibm,everest-bmc
> >                - ibm,fuji-bmc
> >
> > --
> > 2.51.0
> >

Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add Meta Yosemite5 board

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1829 bytes --]

On Thu, Oct 02, 2025 at 12:23:47PM +0800, Kevin Tung wrote:
> On Thu, Oct 2, 2025 at 2:33 AM Conor Dooley <conor@kernel.org> wrote:
> >
> > On Wed, Oct 01, 2025 at 04:47:50PM +0800, Kevin Tung wrote:
> > > Document the new compatibles used on Meta Yosemite5.
> > >
> > > Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
> >
> > You've repeatedly ignored my ack, so I assume you don't want it.
> > Maybe you want a nak instead?
> >
> 
> Apologies for ignoring your ack repeatedly, that was not intentional.
> I truly value your review and will make sure to include it. Would you
> suggest that I send a v4 to pick it up, or is it fine to carry it
> forward in the next revision?
> Thank you again for taking the time to review my patches.

Acked-by: Conor Dooley <conor.dooley@microchip.com>

The maintainer will add it when they apply, there's no need to make
another version for this alone.

> 
> Kevin
> > > ---
> > >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > > index 456dbf7b5ec8f4442be815284e1ad085287dc443..6f2b12f96bd6ce31b4175e109a78d931dffdfe28 100644
> > > --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > > +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > > @@ -89,6 +89,7 @@ properties:
> > >                - facebook,minerva-cmc
> > >                - facebook,santabarbara-bmc
> > >                - facebook,yosemite4-bmc
> > > +              - facebook,yosemite5-bmc
> > >                - ibm,blueridge-bmc
> > >                - ibm,everest-bmc
> > >                - ibm,fuji-bmc
> > >
> > > --
> > > 2.51.0
> > >

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v3 1/2] dt-bindings: arm: aspeed: add Meta Yosemite5 board

[Kevin Tung]

On Fri, Oct 3, 2025 at 2:35 AM Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, Oct 02, 2025 at 12:23:47PM +0800, Kevin Tung wrote:
> > On Thu, Oct 2, 2025 at 2:33 AM Conor Dooley <conor@kernel.org> wrote:
> > >
> > > On Wed, Oct 01, 2025 at 04:47:50PM +0800, Kevin Tung wrote:
> > > > Document the new compatibles used on Meta Yosemite5.
> > > >
> > > > Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
> > >
> > > You've repeatedly ignored my ack, so I assume you don't want it.
> > > Maybe you want a nak instead?
> > >
> >
> > Apologies for ignoring your ack repeatedly, that was not intentional.
> > I truly value your review and will make sure to include it. Would you
> > suggest that I send a v4 to pick it up, or is it fine to carry it
> > forward in the next revision?
> > Thank you again for taking the time to review my patches.
>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
>
> The maintainer will add it when they apply, there's no need to make
> another version for this alone.
>
Got it, thanks for clarifying.
> >
> > Kevin
> > > > ---
> > > >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > > > index 456dbf7b5ec8f4442be815284e1ad085287dc443..6f2b12f96bd6ce31b4175e109a78d931dffdfe28 100644
> > > > --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > > > +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
> > > > @@ -89,6 +89,7 @@ properties:
> > > >                - facebook,minerva-cmc
> > > >                - facebook,santabarbara-bmc
> > > >                - facebook,yosemite4-bmc
> > > > +              - facebook,yosemite5-bmc
> > > >                - ibm,blueridge-bmc
> > > >                - ibm,everest-bmc
> > > >                - ibm,fuji-bmc
> > > >
> > > > --
> > > > 2.51.0
> > > >

Re: [PATCH v3 0/2] Add Meta (Facebook) Yosemite5 BMC (AST2600)

[Andrew Jeffery]

On Wed, 2025-10-01 at 16:47 +0800, Kevin Tung wrote:
> Summary:
> Add device tree for the Meta (Facebook) Yosemite5 compute node,
> based on the AST2600 BMC.
> 
> The Yosemite5 platform provides monitoring of voltages, power,
> temperatures, and other critical parameters across the motherboard,
> CXL board, E1.S expansion board, and NIC components. The BMC also
> logs relevant events and performs appropriate system actions in
> response to abnormal conditions.
> 
> Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>

Thanks, I've applied this to the BMC tree.

Andrew