* [PATCH v2 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019
@ 2025-10-01 14:21 Jingzhou Zhu
2025-10-01 14:21 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Jingzhou Zhu @ 2025-10-01 14:21 UTC (permalink / raw)
To: andersson, konradybcio, robh, krzk+dt, conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, Jingzhou Zhu
Huawei MateBook E 2019 is a 2-in-1 tablet shipped with Windows on ARM.
It is one of the early WoA devices powered by Qualcomm Snapdragon 850,
or the sdm850 platform. This series adds mainline Linux support for this
device using device tree.
Changes since v1:
- Remove 'enable-active-high' property from &vreg_s4a_1p8 and
'input-enable' property from &i2c5_hid_active to avoid warnings
mentioned by "Rob Herring (Arm)" <robh@kernel.org>
base-commit: 3b9b1f8df454caa453c7fb07689064edb2eda90a
Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com>
---
Jingzhou Zhu (2):
dt-bindings: arm: qcom: Document Huawei MateBook E 2019
arm64: dts: qcom: Add support for Huawei MateBook E 2019
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../qcom/sdm850-huawei-matebook-e-2019.dts | 962 ++++++++++++++++++
3 files changed, 964 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts
--
2.47.3
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 1/2] dt-bindings: arm: qcom: Document Huawei MateBook E 2019 2025-10-01 14:21 [PATCH v2 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019 Jingzhou Zhu @ 2025-10-01 14:21 ` Jingzhou Zhu 2025-10-01 14:21 ` [PATCH v2 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Jingzhou Zhu 2 siblings, 0 replies; 11+ messages in thread From: Jingzhou Zhu @ 2025-10-01 14:21 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt Cc: linux-arm-msm, devicetree, linux-kernel, Jingzhou Zhu Add compatible for the sdm850-based tablet Huawei MateBook E 2019 using its codename "planck". Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 18b5ed044f9f..2c1ceb8d4f25 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -893,6 +893,7 @@ properties: - items: - enum: + - huawei,planck - lenovo,yoga-c630 - lg,judyln - lg,judyp -- 2.47.3 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/2] arm64: dts: qcom: Add support for Huawei MateBook E 2019 2025-10-01 14:21 [PATCH v2 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019 Jingzhou Zhu 2025-10-01 14:21 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu @ 2025-10-01 14:21 ` Jingzhou Zhu 2025-10-02 3:27 ` Bjorn Andersson 2025-10-03 13:19 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Jingzhou Zhu 2 siblings, 1 reply; 11+ messages in thread From: Jingzhou Zhu @ 2025-10-01 14:21 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt Cc: linux-arm-msm, devicetree, linux-kernel, Jingzhou Zhu Add device tree for Huawei MateBook E 2019, which is a 2-in-1 tablet based on Qualcomm's sdm850 platform. Supported features: - ACSP, CDSP and SLPI - Volume Key - Power Key - Tablet Mode Switching - Display - Touchscreen - Stylus - WiFi - Bluetooth - GPU - USB - Keyboard - Touchpad - UFS - SD Card - Audio (right internal mic and headphone mic not working) - Mobile Network Features not supported yet: - Panel Backlight - Lid Detection - Battery - EFI Variable Access - Cameras 1. Panel backlight, lid detection and battery will be supported with the EC driver upstreamed. 2. EFI variables can only be read with the QSEECOM driver, and will be enabled when the driver is fixed. 3. Cameras are tested to work with modified downstream driver, and once drivers for these camera modules are included in the tree, cameras can be enabled. Features won't be supported: - External Display - Fingerprint 1. To make external display work, more reverse engineering may be required, but it's beyond my ability. 2. Fingerprint is controlled by TrustZone, meaning direct access to it isn't possible. Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/sdm850-huawei-matebook-e-2019.dts | 962 ++++++++++++++++++ 2 files changed, 963 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 296688f7cb26..a6bcebe66dd7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -258,6 +258,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts new file mode 100644 index 000000000000..ec786286a604 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts @@ -0,0 +1,962 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Huawei MateBook E 2019 + * + * Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd934x.h> +#include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &tz_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; + +/ { + model = "Huawei MateBook E 2019"; + compatible = "huawei,planck", "qcom,sdm845"; + chassis-type = "convertible"; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_gpio &mode_pin_active>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + wakeup-source; + }; + + switch-mode { + label = "Tablet mode switch"; + gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + }; + + reserved-memory { + cont_splash_mem: framebuffer@80100000 { + reg = <0 0x80100000 0 0xd00000>; + no-map; + }; + + tz_mem: tz@86d00000 { + reg = <0 0x86d00000 0 0x4600000>; + no-map; + }; + + qseecom_mem: qseecom@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1200000>; + }; + + gpu_mem: gpu@97900000 { + reg = <0 0x97900000 0 0x5000>; + no-map; + }; + + rmtfs_mem: rmtfs@97c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x97c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + + }; + }; + + sw_edp_1p2: edp-1p2-regulator { + compatible = "regulator-fixed"; + regulator-name = "sw_edp_1p2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + pinctrl-0 = <&sw_edp_1p2_en>; + pinctrl-names = "default"; + + gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_l2a_1p2>; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + }; + + vlcm_3v3: regulator-vlcm-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vlcm_3v3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led: camera_indicator_led { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p8: smps6 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <1028000>; + regulator-max-microvolt = <1028000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + regulator-always-on; + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + /* 3075000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + /* 3300000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + }; + }; +}; + +&cci_i2c0 { + /* chipnext,cn3927e vcm@0xc */ + /* samsung,s5k3l6 camera@0x10 */ + /* eeprom@0x50 */ +}; + +&cci_i2c1 { + /* galaxycore,gc5025 camera@0x36 */ + /* eeprom@0x50 */ +}; + +&cdsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn"; + status = "okay"; +}; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn"; + }; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen: hid@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&i2c5_hid_active>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c7 { + /* ec@0x76 */ +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + pinctrl-0 = <&sn65dsi86_pin_active>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vcca-supply = <&sw_edp_1p2>; + vcc-supply = <&sw_edp_1p2>; + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "innolux,p120zdg-bf1"; + power-supply = <&vlcm_3v3>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&ipa { + status = "okay"; + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&mss_pil { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn", + "qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn"; + status = "okay"; +}; + +&pm8998_gpios { + sw_edp_1p2_en: pm8998-gpio9-state { + pins = "gpio9"; + function = "normal"; + + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + volume_up_gpio: pm8998-gpio6-state { + pins = "gpio6"; + function = "normal"; + + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pwrkey { + status = "okay"; +}; + +&pm8998_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-names = "default"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; +}; + +&slpi_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn"; + status = "okay"; +}; + +&sound { + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; + model = "HUAWEI-PAK_AL09-M1040"; + + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "DMIC0", "MCLK", + "DMIC0", "MIC BIAS1", + "DMIC2", "MCLK", + "DMIC2", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 AIF1_CAP>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 AIF2_PB>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sn65dsi86_pin_active: sn65dsi86-enable-state { + pins = "gpio96"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c5_hid_active: i2c5-hid-active-state { + pins = "gpio125"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mode_pin_active: mode-pin-state { + pins = "gpio79"; + function = "gpio"; + + bias-disable; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + + bias-pull-up; + }; +}; + +&uart6 { + pinctrl-0 = <&qup_uart6_4pin>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&venus { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn"; + status = "okay"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + + swm: soundwire@c85 { + left_spkr: speaker@0,3 { + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: speaker@0,4 { + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,calibration-variant = "Huawei_Planck"; +}; -- 2.47.3 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: Add support for Huawei MateBook E 2019 2025-10-01 14:21 ` [PATCH v2 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu @ 2025-10-02 3:27 ` Bjorn Andersson 0 siblings, 0 replies; 11+ messages in thread From: Bjorn Andersson @ 2025-10-02 3:27 UTC (permalink / raw) To: Jingzhou Zhu Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel On Wed, Oct 01, 2025 at 10:21:07PM +0800, Jingzhou Zhu wrote: > Add device tree for Huawei MateBook E 2019, which is a 2-in-1 tablet based > on Qualcomm's sdm850 platform. > > Supported features: > - ACSP, CDSP and SLPI > - Volume Key > - Power Key > - Tablet Mode Switching > - Display > - Touchscreen > - Stylus > - WiFi > - Bluetooth > - GPU > - USB > - Keyboard > - Touchpad > - UFS > - SD Card > - Audio (right internal mic and headphone mic not working) > - Mobile Network > > Features not supported yet: > - Panel Backlight > - Lid Detection > - Battery > - EFI Variable Access > - Cameras > > 1. Panel backlight, lid detection and battery will be supported with the > EC driver upstreamed. > 2. EFI variables can only be read with the QSEECOM driver, and will be > enabled when the driver is fixed. > 3. Cameras are tested to work with modified downstream driver, and once > drivers for these camera modules are included in the tree, cameras can > be enabled. > > Features won't be supported: > - External Display > - Fingerprint > > 1. To make external display work, more reverse engineering may be required, > but it's beyond my ability. > 2. Fingerprint is controlled by TrustZone, meaning direct access to it > isn't possible. > > Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/sdm850-huawei-matebook-e-2019.dts | 962 ++++++++++++++++++ > 2 files changed, 963 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 296688f7cb26..a6bcebe66dd7 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -258,6 +258,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts > new file mode 100644 > index 000000000000..ec786286a604 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts > @@ -0,0 +1,962 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Huawei MateBook E 2019 > + * > + * Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include <dt-bindings/sound/qcom,q6afe.h> > +#include <dt-bindings/sound/qcom,q6asm.h> > +#include <dt-bindings/sound/qcom,wcd934x.h> > +#include "sdm850.dtsi" > +#include "sdm845-wcd9340.dtsi" > +#include "pm8998.dtsi" > + > +/* > + * Update following upstream (sdm845.dtsi) reserved > + * memory mappings for firmware loading to succeed > + * and enable the IPA device. > + */ > +/delete-node/ &tz_mem; > +/delete-node/ &rmtfs_mem; > +/delete-node/ &qseecom_mem; > +/delete-node/ &ipa_fw_mem; > +/delete-node/ &ipa_gsi_mem; > +/delete-node/ &gpu_mem; > +/delete-node/ &adsp_mem; > +/delete-node/ &wlan_msa_mem; > +/delete-node/ &slpi_mem; > + > +/ { > + model = "Huawei MateBook E 2019"; > + compatible = "huawei,planck", "qcom,sdm845"; > + chassis-type = "convertible"; > + > + aliases { > + serial0 = &uart9; > + serial1 = &uart6; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&volume_up_gpio &mode_pin_active>; > + pinctrl-names = "default"; > + > + key-vol-up { > + label = "Volume up"; > + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + debounce-interval = <15>; > + wakeup-source; > + }; > + > + switch-mode { > + label = "Tablet mode switch"; > + gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; > + linux,input-type = <EV_SW>; > + linux,code = <SW_TABLET_MODE>; > + wakeup-source; > + }; > + }; > + > + reserved-memory { > + cont_splash_mem: framebuffer@80100000 { > + reg = <0 0x80100000 0 0xd00000>; > + no-map; > + }; > + > + tz_mem: tz@86d00000 { > + reg = <0 0x86d00000 0 0x4600000>; > + no-map; > + }; > + > + qseecom_mem: qseecom@8b500000 { > + reg = <0 0x8b500000 0 0xa00000>; > + no-map; > + }; > + > + wlan_msa_mem: wlan-msa@8c400000 { > + reg = <0 0x8c400000 0 0x100000>; > + no-map; > + }; > + > + adsp_mem: adsp@8c500000 { > + reg = <0 0x8c500000 0 0x1a00000>; > + no-map; > + }; > + > + ipa_fw_mem: ipa-fw@8df00000 { > + reg = <0 0x8df00000 0 0x100000>; > + no-map; > + }; > + > + slpi_mem: slpi@96700000 { > + reg = <0 0x96700000 0 0x1200000>; > + }; > + > + gpu_mem: gpu@97900000 { > + reg = <0 0x97900000 0 0x5000>; > + no-map; > + }; > + > + rmtfs_mem: rmtfs@97c00000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0 0x97c00000 0 0x200000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; > + > + }; > + }; > + > + sw_edp_1p2: edp-1p2-regulator { Please see and adjust according to "Order of Nodes" section in Documentation/devicetree/bindings/dts-coding-style.rst ("edp" < "leds" < "regulator" < "reserved" ...) > + compatible = "regulator-fixed"; > + regulator-name = "sw_edp_1p2"; > + > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + > + pinctrl-0 = <&sw_edp_1p2_en>; > + pinctrl-names = "default"; > + > + gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + vin-supply = <&vreg_l2a_1p2>; > + }; > + > + sn65dsi86_refclk: sn65dsi86-refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + > + clock-frequency = <19200000>; > + }; > + [..] > +&i2c5 { > + status = "okay"; And for these, look at the "Order of Properties in Device Node" section. > + clock-frequency = <400000>; > + Regards, Bjorn ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019 2025-10-01 14:21 [PATCH v2 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019 Jingzhou Zhu 2025-10-01 14:21 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu 2025-10-01 14:21 ` [PATCH v2 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu @ 2025-10-03 13:19 ` Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu ` (2 more replies) 2 siblings, 3 replies; 11+ messages in thread From: Jingzhou Zhu @ 2025-10-03 13:19 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt Cc: linux-arm-msm, devicetree, linux-kernel, Jingzhou Zhu Huawei MateBook E 2019 is a 2-in-1 tablet shipped with Windows on ARM. It is one of the early WoA devices powered by Qualcomm Snapdragon 850, or the sdm850 platform. This series adds mainline Linux support for this device using device tree. Changes since v1: - Remove 'enable-active-high' property from &vreg_s4a_1p8 and 'input-enable' property from &i2c5_hid_active to avoid warnings mentioned by "Rob Herring (Arm)" <robh@kernel.org> Changes since v2: - Rearranged the order of nodes and properties suggested by Bjorn to meet the dts coding guidelines base-commit: 7396732143a22b42bb97710173d598aaf50daa89 Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> --- Jingzhou Zhu (2): dt-bindings: arm: qcom: Document Huawei MateBook E 2019 arm64: dts: qcom: Add support for Huawei MateBook E 2019 .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/sdm850-huawei-matebook-e-2019.dts | 962 ++++++++++++++++++ 3 files changed, 964 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts -- 2.47.3 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 1/2] dt-bindings: arm: qcom: Document Huawei MateBook E 2019 2025-10-03 13:19 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Jingzhou Zhu @ 2025-10-03 13:19 ` Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu 2025-10-03 21:57 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Dmitry Baryshkov 2 siblings, 0 replies; 11+ messages in thread From: Jingzhou Zhu @ 2025-10-03 13:19 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt Cc: linux-arm-msm, devicetree, linux-kernel, Jingzhou Zhu Add compatible for the sdm850-based tablet Huawei MateBook E 2019 using its codename "planck". Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 18b5ed044f9f..2c1ceb8d4f25 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -893,6 +893,7 @@ properties: - items: - enum: + - huawei,planck - lenovo,yoga-c630 - lg,judyln - lg,judyp -- 2.47.3 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 2/2] arm64: dts: qcom: Add support for Huawei MateBook E 2019 2025-10-03 13:19 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu @ 2025-10-03 13:19 ` Jingzhou Zhu 2025-10-03 22:33 ` Dmitry Baryshkov 2025-10-03 21:57 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Dmitry Baryshkov 2 siblings, 1 reply; 11+ messages in thread From: Jingzhou Zhu @ 2025-10-03 13:19 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt Cc: linux-arm-msm, devicetree, linux-kernel, Jingzhou Zhu Add device tree for Huawei MateBook E 2019, which is a 2-in-1 tablet based on Qualcomm's sdm850 platform. Supported features: - ACSP, CDSP and SLPI - Volume Key - Power Key - Tablet Mode Switching - Display - Touchscreen - Stylus - WiFi - Bluetooth - GPU - USB - Keyboard - Touchpad - UFS - SD Card - Audio (right internal mic and headphone mic not working) - Mobile Network Features not supported yet: - Panel Backlight - Lid Detection - Battery - EFI Variable Access - Cameras 1. Panel backlight, lid detection and battery will be supported with the EC driver upstreamed. 2. EFI variables can only be read with the QSEECOM driver, and will be enabled when the driver is fixed. 3. Cameras are tested to work with modified downstream driver, and once drivers for these camera modules are included in the tree, cameras can be enabled. Features won't be supported: - External Display - Fingerprint 1. To make external display work, more reverse engineering may be required, but it's beyond my ability. 2. Fingerprint is controlled by TrustZone, meaning direct access to it isn't possible. Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/sdm850-huawei-matebook-e-2019.dts | 962 ++++++++++++++++++ 2 files changed, 963 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 296688f7cb26..a6bcebe66dd7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -258,6 +258,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts new file mode 100644 index 000000000000..4689b22ce3ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts @@ -0,0 +1,962 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Huawei MateBook E 2019 + * + * Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd934x.h> +#include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &tz_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; + +/ { + model = "Huawei MateBook E 2019"; + compatible = "huawei,planck", "qcom,sdm845"; + chassis-type = "convertible"; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_gpio &mode_pin_active>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + wakeup-source; + }; + + switch-mode { + label = "Tablet mode switch"; + gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led: camera_indicator_led { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + sw_edp_1p2: regulator-edp-1p2 { + compatible = "regulator-fixed"; + regulator-name = "sw_edp_1p2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + pinctrl-0 = <&sw_edp_1p2_en>; + pinctrl-names = "default"; + + gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_l2a_1p2>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + }; + + vlcm_3v3: regulator-vlcm-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vlcm_3v3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + cont_splash_mem: framebuffer@80100000 { + reg = <0 0x80100000 0 0xd00000>; + no-map; + }; + + tz_mem: tz@86d00000 { + reg = <0 0x86d00000 0 0x4600000>; + no-map; + }; + + qseecom_mem: qseecom@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1200000>; + }; + + gpu_mem: gpu@97900000 { + reg = <0 0x97900000 0 0x5000>; + no-map; + }; + + rmtfs_mem: rmtfs@97c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x97c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p8: smps6 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <1028000>; + regulator-max-microvolt = <1028000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + regulator-always-on; + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + /* 3075000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + /* 3300000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + }; + }; +}; + +&cci_i2c0 { + /* chipnext,cn3927e vcm@0xc */ + /* samsung,s5k3l6 camera@0x10 */ + /* eeprom@0x50 */ +}; + +&cci_i2c1 { + /* galaxycore,gc5025 camera@0x36 */ + /* eeprom@0x50 */ +}; + +&cdsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn"; + status = "okay"; +}; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn"; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen: hid@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&i2c5_hid_active>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c7 { + /* ec@0x76 */ +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + pinctrl-0 = <&sn65dsi86_pin_active>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vcca-supply = <&sw_edp_1p2>; + vcc-supply = <&sw_edp_1p2>; + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "innolux,p120zdg-bf1"; + power-supply = <&vlcm_3v3>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn", + "qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn"; + status = "okay"; +}; + +&pm8998_gpios { + sw_edp_1p2_en: pm8998-gpio9-state { + pins = "gpio9"; + function = "normal"; + + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + volume_up_gpio: pm8998-gpio6-state { + pins = "gpio6"; + function = "normal"; + + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pwrkey { + status = "okay"; +}; + +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-names = "default"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&slpi_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn"; + status = "okay"; +}; + +&sound { + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; + model = "HUAWEI-PAK_AL09-M1040"; + + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "DMIC0", "MCLK", + "DMIC0", "MIC BIAS1", + "DMIC2", "MCLK", + "DMIC2", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 AIF1_CAP>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 AIF2_PB>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mode_pin_active: mode-pin-state { + pins = "gpio79"; + function = "gpio"; + + bias-disable; + }; + + sn65dsi86_pin_active: sn65dsi86-enable-state { + pins = "gpio96"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c5_hid_active: i2c5-hid-active-state { + pins = "gpio125"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + + bias-pull-up; + }; +}; + +&uart6 { + pinctrl-0 = <&qup_uart6_4pin>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; + + status = "okay"; +}; + +&usb_2_qmpphy { + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn"; + status = "okay"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + + swm: soundwire@c85 { + left_spkr: speaker@0,3 { + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: speaker@0,4 { + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,calibration-variant = "Huawei_Planck"; + + status = "okay"; +}; -- 2.47.3 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: Add support for Huawei MateBook E 2019 2025-10-03 13:19 ` [PATCH v3 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu @ 2025-10-03 22:33 ` Dmitry Baryshkov 2025-10-04 11:53 ` Jingzhou Zhu 0 siblings, 1 reply; 11+ messages in thread From: Dmitry Baryshkov @ 2025-10-03 22:33 UTC (permalink / raw) To: Jingzhou Zhu Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel On Fri, Oct 03, 2025 at 09:19:25PM +0800, Jingzhou Zhu wrote: > Add device tree for Huawei MateBook E 2019, which is a 2-in-1 tablet based > on Qualcomm's sdm850 platform. > > Supported features: > - ACSP, CDSP and SLPI > - Volume Key > - Power Key > - Tablet Mode Switching > - Display > - Touchscreen > - Stylus > - WiFi > - Bluetooth > - GPU > - USB > - Keyboard > - Touchpad > - UFS > - SD Card > - Audio (right internal mic and headphone mic not working) > - Mobile Network > > Features not supported yet: > - Panel Backlight > - Lid Detection > - Battery > - EFI Variable Access > - Cameras > > 1. Panel backlight, lid detection and battery will be supported with the > EC driver upstreamed. > 2. EFI variables can only be read with the QSEECOM driver, and will be > enabled when the driver is fixed. > 3. Cameras are tested to work with modified downstream driver, and once > drivers for these camera modules are included in the tree, cameras can > be enabled. > > Features won't be supported: > - External Display > - Fingerprint > > 1. To make external display work, more reverse engineering may be required, > but it's beyond my ability. > 2. Fingerprint is controlled by TrustZone, meaning direct access to it > isn't possible. > > Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/sdm850-huawei-matebook-e-2019.dts | 962 ++++++++++++++++++ > 2 files changed, 963 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts > > + > + vph_pwr: regulator-vph-pwr { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + }; > + > + vlcm_3v3: regulator-vlcm-3v3 { vlcm < vph > + compatible = "regulator-fixed"; > + regulator-name = "vlcm_3v3"; > + > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + vin-supply = <&vph_pwr>; > + }; > + > + > +&gpu { > + status = "okay"; > + zap-shader { empty line between properties and subnodes > + memory-region = <&gpu_mem>; > + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn"; > + }; > +}; > + > +&i2c5 { > + clock-frequency = <400000>; > + status = "okay"; Nit: please add empty line before status property (here and further) > + > + > +&pm8998_gpios { > + sw_edp_1p2_en: pm8998-gpio9-state { Up to you, but there is no need to prefix them with the pmm8998-. > + pins = "gpio9"; > + function = "normal"; > + > + bias-disable; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; > + }; > + > + volume_up_gpio: pm8998-gpio6-state { > + pins = "gpio6"; > + function = "normal"; > + > + input-enable; > + bias-pull-up; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; > + }; > +}; > + > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <81 4>; > + > + cam_indicator_en: cam-indicator-en-state { > + pins = "gpio12"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + > + mode_pin_active: mode-pin-state { > + pins = "gpio79"; > + function = "gpio"; > + > + bias-disable; > + }; > + > + sn65dsi86_pin_active: sn65dsi86-enable-state { Please sort these too (by the name, not by the label. > + pins = "gpio96"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + > + i2c5_hid_active: i2c5-hid-active-state { > + pins = "gpio125"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-pull-up; > + }; > + > +&wifi { > + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; > + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; > + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; > + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; > + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; > + > + qcom,snoc-host-cap-8bit-quirk; > + qcom,calibration-variant = "Huawei_Planck"; Did you post the board data to the ath10k@ mailing list? See https://wireless.docs.kernel.org/en/latest/en/users/drivers/ath10k/boardfiles.html Also if possible, please include output from BT and WiFi probing to the commit message. > + > + status = "okay"; > +}; > -- > 2.47.3 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: Add support for Huawei MateBook E 2019 2025-10-03 22:33 ` Dmitry Baryshkov @ 2025-10-04 11:53 ` Jingzhou Zhu 2025-10-05 22:05 ` Dmitry Baryshkov 0 siblings, 1 reply; 11+ messages in thread From: Jingzhou Zhu @ 2025-10-04 11:53 UTC (permalink / raw) To: Dmitry Baryshkov Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel On Saturday, 4 October 2025 06:33:27 CST, Dmitry Baryshkov wrote: > Did you post the board data to the ath10k@ mailing list? > > See https://wireless.docs.kernel.org/en/latest/en/users/drivers/ath10k/boardfiles.html Hi, I submitted the board file several days ago (see [1]), but there's no reply from the reviewers. Is there anything wrong with my post? It's my first time to send patches, plz let me know if I did anything wrong, thanks! [1] https://lists.infradead.org/pipermail/ath10k/2025-September/016495.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: Add support for Huawei MateBook E 2019 2025-10-04 11:53 ` Jingzhou Zhu @ 2025-10-05 22:05 ` Dmitry Baryshkov 0 siblings, 0 replies; 11+ messages in thread From: Dmitry Baryshkov @ 2025-10-05 22:05 UTC (permalink / raw) To: Jingzhou Zhu Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel On Sat, Oct 04, 2025 at 07:53:13PM +0800, Jingzhou Zhu wrote: > On Saturday, 4 October 2025 06:33:27 CST, Dmitry Baryshkov wrote: > > Did you post the board data to the ath10k@ mailing list? > > > > See https://wireless.docs.kernel.org/en/latest/en/users/drivers/ath10k/boardfiles.html > > Hi, I submitted the board file several days ago (see [1]), but there's no reply from the reviewers. > Is there anything wrong with my post? It's my first time to send patches, plz let me know if I did > anything wrong, thanks! > > [1] https://lists.infradead.org/pipermail/ath10k/2025-September/016495.html This looks good. It might take some time for Jeff to pick those. -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019 2025-10-03 13:19 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu @ 2025-10-03 21:57 ` Dmitry Baryshkov 2 siblings, 0 replies; 11+ messages in thread From: Dmitry Baryshkov @ 2025-10-03 21:57 UTC (permalink / raw) To: Jingzhou Zhu Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel On Fri, Oct 03, 2025 at 09:19:23PM +0800, Jingzhou Zhu wrote: > Huawei MateBook E 2019 is a 2-in-1 tablet shipped with Windows on ARM. > It is one of the early WoA devices powered by Qualcomm Snapdragon 850, > or the sdm850 platform. This series adds mainline Linux support for this > device using device tree. > > Changes since v1: > - Remove 'enable-active-high' property from &vreg_s4a_1p8 and > 'input-enable' property from &i2c5_hid_active to avoid warnings > mentioned by "Rob Herring (Arm)" <robh@kernel.org> > > Changes since v2: > - Rearranged the order of nodes and properties suggested by Bjorn to meet > the dts coding guidelines > > base-commit: 7396732143a22b42bb97710173d598aaf50daa89 > > Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> > --- > Jingzhou Zhu (2): > dt-bindings: arm: qcom: Document Huawei MateBook E 2019 > arm64: dts: qcom: Add support for Huawei MateBook E 2019 > Please don't send new versions as a reply to the previous one. It might be ignored by other people or by the tools. -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2025-10-05 22:05 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-10-01 14:21 [PATCH v2 0/2] arm64: dts: qcom: Introduce Huawei MateBook E 2019 Jingzhou Zhu 2025-10-01 14:21 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu 2025-10-01 14:21 ` [PATCH v2 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu 2025-10-02 3:27 ` Bjorn Andersson 2025-10-03 13:19 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document " Jingzhou Zhu 2025-10-03 13:19 ` [PATCH v3 2/2] arm64: dts: qcom: Add support for " Jingzhou Zhu 2025-10-03 22:33 ` Dmitry Baryshkov 2025-10-04 11:53 ` Jingzhou Zhu 2025-10-05 22:05 ` Dmitry Baryshkov 2025-10-03 21:57 ` [PATCH v3 0/2] arm64: dts: qcom: Introduce " Dmitry Baryshkov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).