From: Conor Dooley <conor@kernel.org>
To: CL Wang <cl634@andestech.com>
Cc: vkoul@kernel.org, dmaengine@vger.kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
tim609@andestech.com
Subject: Re: [PATCH V1 1/2] dt-bindings: dmaengine: Add support for ATCDMAC300 DMA engine
Date: Thu, 2 Oct 2025 19:40:35 +0100 [thread overview]
Message-ID: <20251002-absolute-spinning-f899e75b2c4a@spud> (raw)
In-Reply-To: <20251002131659.973955-2-cl634@andestech.com>
[-- Attachment #1: Type: text/plain, Size: 2685 bytes --]
On Thu, Oct 02, 2025 at 09:16:58PM +0800, CL Wang wrote:
> Document devicetree bindings for Andes ATCDMAC300 DMA engine
>
> Signed-off-by: CL Wang <cl634@andestech.com>
> ---
> .../bindings/dma/andestech,atcdmac300.yaml | 51 +++++++++++++++++++
> MAINTAINERS | 6 +++
> 2 files changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/andestech,atcdmac300.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/andestech,atcdmac300.yaml b/Documentation/devicetree/bindings/dma/andestech,atcdmac300.yaml
> new file mode 100644
> index 000000000000..769694616517
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/andestech,atcdmac300.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/andestech,atcdmac300.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Andes ATCDMAC300 DMA Controller
> +
> +maintainers:
> + - CL Wang <cl634@andestech.com>
> +
> +allOf:
> + - $ref: dma-controller.yaml#
> +
> +properties:
> + compatible:
> + const: andestech,atcdmac300
"atcdmac300" sounds like the name of an IP block. What platforms are
actually using this? They should have platform-specific compatibles, for
example, "andestech,qilai-dma" if that's the platform where this is
supported.
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#dma-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#dma-cells"
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + dma-controller@f0c00000 {
> + compatible = "andestech,atcdmac300";
> + reg = <0x0 0xf0c00000 0x0 0x1000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fe168477caa4..dd3272cdadd6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1778,6 +1778,12 @@ S: Supported
> F: drivers/clk/analogbits/*
> F: include/linux/clk/analogbits*
>
> +ANDES DMA DRIVER
> +M: CL Wang <cl634@andestech.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/dma/andestech,atcdmac300.yaml
> +F: drivers/dma/atcdmac300*
> +
> ANDROID DRIVERS
> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> M: Arve Hjønnevåg <arve@android.com>
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2025-10-02 18:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-02 13:16 [PATCH V1 0/2] dmaengine: atcdmac300: Add Andes ATCDMAC300 DMA driver CL Wang
2025-10-02 13:16 ` [PATCH V1 1/2] dt-bindings: dmaengine: Add support for ATCDMAC300 DMA engine CL Wang
2025-10-02 18:40 ` Conor Dooley [this message]
2025-10-07 12:33 ` CL Wang
2025-10-07 14:27 ` Krzysztof Kozlowski
2025-10-08 3:13 ` CL Wang
2025-10-08 8:04 ` Krzysztof Kozlowski
2025-10-08 13:35 ` CL Wang
2025-10-08 20:45 ` Conor Dooley
2025-10-08 23:48 ` Krzysztof Kozlowski
2025-10-09 8:40 ` CL Wang
2025-10-02 13:16 ` [PATCH V1 2/2] dmaengine: atcdmac300: Add driver for Andes ATCDMAC300 DMA controller CL Wang
2025-10-03 17:36 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251002-absolute-spinning-f899e75b2c4a@spud \
--to=conor@kernel.org \
--cc=cl634@andestech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tim609@andestech.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).