[PATCH v3 0/3] drm/sitronix/st7920: Add support for the ST7920 controller

[PATCH v3 0/3] drm/sitronix/st7920: Add support for the ST7920 controller

[Iker Pedrosa]

This patch-series adds support for the Sitronix ST7920 controller, which
is a monochrome dot-matrix graphical LCD controller that has SPI and
parallel interfaces.

The st7920 driver only has support for SPI so displays using other
transport protocols are currently not supported.

* Patch #1 adds the driver.
* Patch #2 adds the DT binding schema.
* Patch #3 adds the MAINTAINERS information.

---
Changes in v3:
- Reorganize the patch documenting compatible (DT bindings) before their
  use.
- Drop reduntant information from DT bindings.
- Use a goto label to ensure drm_dev_exit() is called in the error path
  of drm_gem_fb_begin_cpu_access().
- Link to v2: https://lore.kernel.org/r/20250909-st7920-v2-0-409f4890fb5f@gmail.com

Changes in v2:
- Refactor SPI communication:
  * Internalize error handling and delays within the st7920_spi_write()
    helper.
  * Split the main SPI write function into smaller, command-specific
    helpers for clarity.
- Improve DRM/KMS logic:
  * Relocate CPU access calls (drm_gem_fb...) to the atomic_update hook.
  * Use standard DRM helpers (drm_crtc_helper_mode_valid_fixed and
    drm_connector_helper_get_modes_fixed) for mode validation and
    creation.
- General code cleanup:
  * Remove dead code related to ST7920_FAMILY.
  * Replace WARN_ON() with drm_WARN_ON_ONCE().
  * Ensure single variable assignments per line.
- Fix probe initialization order:
  * Move spi_set_drvdata() and st7920_init() to occur before device
    registration.
- Devicetree:
  * Update bindings to address feedback from review (e.g., reference
    common SPI properties).
- MAINTAINERS:
  * Add a proper commit message to the patch.
- Link to v1: https://lore.kernel.org/r/20250806-st7920-v1-0-64ab5a34f9a0@gmail.com
---

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>

---
Iker Pedrosa (3):
      dt-bindings: display: sitronix,st7920: Add DT schema
      drm: Add driver for Sitronix ST7920 LCD displays
      MAINTAINERS: Add entry for Sitronix ST7920 driver

 .../bindings/display/sitronix,st7920.yaml          |  50 ++
 MAINTAINERS                                        |   7 +
 drivers/gpu/drm/sitronix/Kconfig                   |  10 +
 drivers/gpu/drm/sitronix/Makefile                  |   1 +
 drivers/gpu/drm/sitronix/st7920.c                  | 892 +++++++++++++++++++++
 5 files changed, 960 insertions(+)
---
base-commit: c571cb70e1ed43ee543c70151e61a001ab2eefa2
change-id: 20250806-st7920-e7aba32b3ab6

Best regards,
-- 
Iker Pedrosa <ikerpedrosam@gmail.com>

[PATCH v3 1/3] dt-bindings: display: sitronix,st7920: Add DT schema

[Iker Pedrosa]

Add binding for Sitronix ST7920 display.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
 .../bindings/display/sitronix,st7920.yaml          | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/sitronix,st7920.yaml b/Documentation/devicetree/bindings/display/sitronix,st7920.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b4c16825f254f1b8345a2532271042350e3a5e26
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7920.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7920.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7920 LCD Display Controllers
+
+maintainers:
+  - Iker Pedrosa <ikerpedrosam@gmail.com>
+
+description:
+  The Sitronix ST7920 is a controller for monochrome dot-matrix graphical LCDs,
+  most commonly used for 128x64 pixel displays.
+
+properties:
+  compatible:
+    const: sitronix,st7920
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 600000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "sitronix,st7920";
+            reg = <0>;
+            spi-max-frequency = <600000>;
+            spi-cs-high;
+        };
+    };

-- 
2.51.0

Re: [PATCH v3 1/3] dt-bindings: display: sitronix,st7920: Add DT schema

[Krzysztof Kozlowski]

On 07/10/2025 02:48, Iker Pedrosa wrote:
> +
> +properties:
> +  compatible:
> +    const: sitronix,st7920
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    maximum: 600000
> +

Datasheet I found on the web clearly stats you have at least VDD and XRESET.

Your binding is still not complete (and I asked...), while it should be
complete (See writing bindings doc).


Best regards,
Krzysztof

Re: [PATCH v3 1/3] dt-bindings: display: sitronix,st7920: Add DT schema

[Iker Pedrosa]

El mar, 7 oct 2025 a las 11:12, Krzysztof Kozlowski
(<krzk@kernel.org>) escribió:
>
> On 07/10/2025 02:48, Iker Pedrosa wrote:
> > +
> > +properties:
> > +  compatible:
> > +    const: sitronix,st7920
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  spi-max-frequency:
> > +    maximum: 600000
> > +
>
> Datasheet I found on the web clearly stats you have at least VDD and XRESET.
>
> Your binding is still not complete (and I asked...), while it should be
> complete (See writing bindings doc).

Thanks for the information. You're correct; I'll add the two suggested
properties, XRESET and VDD, to the binding. I'll also implement the
XRESET handling in the driver.

I missed the XRESET pin because my testing setup was working without
it. For VDD, it's currently connected to the RPi's 5V output.

While other Sitronix display bindings in the kernel don't currently
define a supply property (running "git grep -i supply
Documentation/devicetree/bindings/display/sitronix*" confirmed this),
I agree it should be included for a complete binding. I'll define it
as a fixed-regulator in my display DT node.

>
>
> Best regards,
> Krzysztof

[PATCH v3 2/3] drm: Add driver for Sitronix ST7920 LCD displays

[Iker Pedrosa]

Add a new DRM/KMS driver for displays using the Sitronix ST7920
controller connected via the SPI bus. This provides a standard
framebuffer interface for these common monochrome LCDs.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
 drivers/gpu/drm/sitronix/Kconfig  |  10 +
 drivers/gpu/drm/sitronix/Makefile |   1 +
 drivers/gpu/drm/sitronix/st7920.c | 892 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 903 insertions(+)

diff --git a/drivers/gpu/drm/sitronix/Kconfig b/drivers/gpu/drm/sitronix/Kconfig
index 6de7d92d9b74c72746915b945869dba91f161d2b..f14115350069849b668d75188f6d504d56fa3dda 100644
--- a/drivers/gpu/drm/sitronix/Kconfig
+++ b/drivers/gpu/drm/sitronix/Kconfig
@@ -40,3 +40,13 @@ config DRM_ST7735R
 
 	  If M is selected the module will be called st7735r.
 
+config DRM_ST7920
+	tristate "DRM support for Sitronix ST7920 LCD displays"
+	depends on DRM && SPI && MMU
+	select DRM_GEM_SHMEM_HELPER
+	select DRM_KMS_HELPER
+	select REGMAP_SPI
+	help
+	  DRM driver for the ST7920 Sitronix LCD controllers.
+
+	  If M is selected the module will be called st7920.
diff --git a/drivers/gpu/drm/sitronix/Makefile b/drivers/gpu/drm/sitronix/Makefile
index bd139e5a6995fa026cc635b3c29782473d1efad7..2f064a518121bfee3cca73acd42589e8c54cd4d7 100644
--- a/drivers/gpu/drm/sitronix/Makefile
+++ b/drivers/gpu/drm/sitronix/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_DRM_ST7571_I2C)		+= st7571-i2c.o
 obj-$(CONFIG_DRM_ST7586)		+= st7586.o
 obj-$(CONFIG_DRM_ST7735R)		+= st7735r.o
+obj-$(CONFIG_DRM_ST7920))		+= st7920.o
diff --git a/drivers/gpu/drm/sitronix/st7920.c b/drivers/gpu/drm/sitronix/st7920.c
new file mode 100644
index 0000000000000000000000000000000000000000..1306f6f68f37b8ce5665a2c06f5417b94250faa0
--- /dev/null
+++ b/drivers/gpu/drm/sitronix/st7920.c
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DRM driver for Sitronix ST7920 LCD displays
+ *
+ * Copyright 2025 Iker Pedrosa <ikerpedrosam@gmail.com>
+ *
+ */
+
+#include <linux/bitrev.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_client_setup.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_shmem.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_gem_shmem_helper.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_probe_helper.h>
+
+#define DRIVER_NAME	"sitronix_st7920"
+#define DRIVER_DESC	"DRM driver for Sitronix ST7920 LCD displays"
+#define DRIVER_DATE	"20250723"
+#define DRIVER_MAJOR	1
+#define DRIVER_MINOR	0
+
+/* Display organization */
+#define WIDTH_BYTES		16
+#define HEIGHT_IN_PIXELS	64
+#define BYTES_IN_DISPLAY	(WIDTH_BYTES * HEIGHT_IN_PIXELS)
+#define BYTES_IN_SEGMENT	2
+#define PIXELS_IN_SEGMENT	(BYTES_IN_SEGMENT * 8)
+
+/* Sync sequence */
+#define SYNC_BITS			0xF8
+#define RW_HIGH				0x04
+#define RS_HIGH				0x02
+
+/* Commands */
+#define SET_DISPLAY_ON			0x0C
+#define SET_DISPLAY_OFF			0x08
+#define SET_DISPLAY_CLEAR		0x01
+#define SET_BASIC_INSTRUCTION_SET	0x30
+#define SET_EXT_INSTRUCTION_SET		0x34
+#define SET_GRAPHICS_DISPLAY		0x36
+#define SET_GDRAM_ADDRESS		0x80
+#define SET_GDRAM_DATA			0xFF /* Driver internal command */
+
+/* Masks */
+#define HIGH_DATA_MASK			0xF0
+#define LOW_DATA_MASK			0x0F
+#define TOP_VERTICAL_ADDRESS		0x80
+#define BOTTOM_VERTICAL_ADDRESS		0x60
+#define TOP_HORIZONTAL_ADDRESS		0x00
+#define BOTTOM_HORIZONTAL_ADDRESS	0x80
+
+#define CMD_SIZE			35
+
+enum st7920_variants {
+	/* st7920 family */
+	ST7920_ID
+};
+
+struct spi7920_error {
+	int errno;
+};
+
+struct st7920_deviceinfo {
+	u32 default_dclk_div;
+	u32 default_dclk_frq;
+	u32 default_width;
+	u32 default_height;
+};
+
+struct st7920_device {
+	struct drm_device drm;
+	struct device *dev;
+	struct drm_display_mode mode;
+	struct drm_plane primary_plane;
+	struct drm_crtc crtc;
+	struct drm_encoder encoder;
+	struct drm_connector connector;
+	struct spi_device *spi;
+
+	struct regmap *regmap;
+
+	const struct st7920_deviceinfo *device_info;
+
+	u32 height;
+	u32 width;
+};
+
+const struct st7920_deviceinfo st7920_variants[] = {
+	[ST7920_ID] = {
+		.default_width = 128,
+		.default_height = 64,
+	}
+};
+EXPORT_SYMBOL_NS_GPL(st7920_variants, DRM_ST7920);
+
+struct st7920_plane_state {
+	struct drm_shadow_plane_state base;
+	/* Intermediate buffer to convert pixels from XRGB8888 to HW format */
+	u8 *buffer;
+};
+
+struct st7920_crtc_state {
+	struct drm_crtc_state base;
+	/* Buffer to store pixels in HW format and written to the panel */
+	u8 *data_array;
+};
+
+static inline struct st7920_plane_state *to_st7920_plane_state(struct drm_plane_state *state)
+{
+	return container_of(state, struct st7920_plane_state, base.base);
+}
+
+static inline struct st7920_crtc_state *to_st7920_crtc_state(struct drm_crtc_state *state)
+{
+	return container_of(state, struct st7920_crtc_state, base);
+}
+
+static inline struct st7920_device *drm_to_st7920(struct drm_device *drm)
+{
+	return container_of(drm, struct st7920_device, drm);
+}
+
+static int st7920_write_gdram_address(const void *data, u8 *reg)
+{
+	const u8 y_addr = *(const u8 *)data;
+	bool bottom_screen = (y_addr >= 32);
+	int i = 0;
+
+	reg[i++] = SYNC_BITS;
+	/* Set vertical address */
+	if (!bottom_screen)
+		reg[i++] = TOP_VERTICAL_ADDRESS + (*(uint8_t *)data & HIGH_DATA_MASK);
+	else
+		reg[i++] = BOTTOM_VERTICAL_ADDRESS + (*(uint8_t *)data & HIGH_DATA_MASK);
+
+	reg[i++] = *(uint8_t *)data << 4;
+	/* Set horizontal address */
+	reg[i++] = SET_GDRAM_ADDRESS;
+	if (!bottom_screen)
+		reg[i++] = TOP_HORIZONTAL_ADDRESS;
+	else
+		reg[i++] = BOTTOM_HORIZONTAL_ADDRESS;
+
+	return i;
+}
+
+static int st7920_write_gdram_data(const void *data, u8 *reg)
+{
+	const u8 *line_data = data;
+	int i = 0, j = 0;
+
+	reg[i++] = SYNC_BITS | RS_HIGH;
+
+	for (j = 0; j < 16; j++) {
+		reg[i++] = line_data[j] & 0xF0;
+		reg[i++] = (line_data[j] << 4) & 0xF0;
+	}
+
+	return i;
+}
+
+static int st7920_write_others(int cmd, const void *data, u8 *reg)
+{
+	int i = 0;
+
+	reg[i++] = SYNC_BITS;
+	reg[i++] = cmd & HIGH_DATA_MASK;
+	reg[i++] = (cmd & LOW_DATA_MASK) << 4;
+
+	return i;
+}
+
+static int st7920_spi_write(struct spi_device *spi, int cmd, const void *data,
+			    int delay_us, struct spi7920_error *err)
+{
+	u8 reg[CMD_SIZE] = {0};
+	int size = 0;
+	int ret;
+
+	if (err->errno)
+		return err->errno;
+
+	/*
+	 * First the sync bits are sent: 11111WS0.
+	 * Where W is the read/write (RW) bit and S is the register/data (RS) bit.
+	 * Then, every 8 bits instruction/data will be separated into 2 groups.
+	 * Higher 4 bits (DB7~DB4) will be placed in the first section followed by
+	 * 4 '0's. And lower 4 bits (DB3~DB0) will be placed in the second section
+	 * followed by 4 '0's.
+	 */
+	if (cmd == SET_GDRAM_ADDRESS)
+		size = st7920_write_gdram_address(data, reg);
+	else if (cmd == SET_GDRAM_DATA)
+		size = st7920_write_gdram_data(data, reg);
+	else
+		size = st7920_write_others(cmd, data, reg);
+
+	ret = spi_write(spi, reg, size);
+	if (ret) {
+		err->errno = ret;
+		return ret;
+	}
+
+	if (delay_us)
+		udelay(delay_us);
+
+	return ret;
+}
+
+static const struct regmap_config st7920_spi_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct of_device_id st7920_of_match[] = {
+	/* st7920 family */
+	{
+		.compatible = "sitronix,st7920",
+		.data = &st7920_variants[ST7920_ID],
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st7920_of_match);
+
+/*
+ * The SPI core always reports a MODALIAS uevent of the form "spi:<dev>", even
+ * if the device was registered via OF. This means that the module will not be
+ * auto loaded, unless it contains an alias that matches the MODALIAS reported.
+ *
+ * To workaround this issue, add a SPI device ID table. Even when this should
+ * not be needed for this driver to match the registered SPI devices.
+ */
+static const struct spi_device_id st7920_spi_id[] = {
+	/* st7920 family */
+	{ "st7920",  ST7920_ID },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, st7920_spi_id);
+
+static int st7920_power_on(struct st7920_device *st7920)
+{
+	struct spi7920_error err = {0};
+	int ret;
+
+	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_ON, NULL, 72, &err);
+
+	return ret;
+}
+
+static int st7920_power_off(struct st7920_device *st7920)
+{
+	struct spi7920_error err = {0};
+	int ret;
+
+	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err);
+	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_OFF, NULL, 72, &err);
+
+	return ret;
+}
+
+static int st7920_init(struct st7920_device *st7920)
+{
+	struct spi7920_error err = {0};
+	int ret;
+
+	ret = st7920_spi_write(st7920->spi, SET_BASIC_INSTRUCTION_SET, NULL, 72, &err);
+	ret = st7920_power_on(st7920);
+	err.errno = ret;
+	ret = st7920_spi_write(st7920->spi, SET_GRAPHICS_DISPLAY, NULL, 72, &err);
+	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int st7920_update_rect(struct st7920_device *st7920,
+			       struct drm_rect *rect, u8 *buf,
+			       u8 *data_array)
+{
+	struct spi7920_error err;
+	u32 array_idx = 0;
+	int i, j;
+	int ret;
+
+	/*
+	 * The screen is divided in 64(Y)x8(X) segments and each segment is
+	 * further divided in 2 bytes (D15~D0).
+	 *
+	 * Segment 0x0 is in the top-right corner, while segment 63x15 is in the
+	 * bottom-left. They would be displayed in the screen in the following way:
+	 * 0x0  0x1  0x2  ... 0x15
+	 * 1x0  1x1  1x2  ... 1x15
+	 * ...
+	 * 63x0 63x1 63x2 ... 63x15
+	 *
+	 * The data in each byte is big endian.
+	 */
+
+	for (i = 0; i < HEIGHT_IN_PIXELS; i++) {
+		u8 *line_start = buf + (i * WIDTH_BYTES);
+		u8 line_buffer[WIDTH_BYTES];
+
+		for (j = 0; j < WIDTH_BYTES; j++) {
+			line_buffer[j] = bitrev8(line_start[j]);
+			data_array[array_idx++] = line_buffer[j];
+		}
+
+		ret = st7920_spi_write(st7920->spi, SET_GDRAM_ADDRESS, &i, 72, &err);
+		ret = st7920_spi_write(st7920->spi, SET_GDRAM_DATA, line_buffer, 72, &err);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static void st7920_clear_screen(struct st7920_device *st7920, u8 *data_array)
+{
+	struct spi7920_error err;
+
+	memset(data_array, 0, BYTES_IN_DISPLAY);
+
+	st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err);
+}
+
+static int st7920_fb_blit_rect(struct drm_framebuffer *fb,
+				const struct iosys_map *vmap,
+				struct drm_rect *rect,
+				u8 *buf, u8 *data_array,
+				struct drm_format_conv_state *fmtcnv_state)
+{
+	struct st7920_device *st7920 = drm_to_st7920(fb->dev);
+	struct iosys_map dst;
+	unsigned int dst_pitch;
+
+	/* Align y to display page boundaries */
+	rect->y1 = round_down(rect->y1, PIXELS_IN_SEGMENT);
+	rect->y2 = min_t(unsigned int, round_up(rect->y2, PIXELS_IN_SEGMENT), st7920->height);
+
+	dst_pitch = DIV_ROUND_UP(drm_rect_width(rect), 8);
+
+	iosys_map_set_vaddr(&dst, buf);
+	drm_fb_xrgb8888_to_mono(&dst, &dst_pitch, vmap, fb, rect, fmtcnv_state);
+
+	st7920_update_rect(st7920, rect, buf, data_array);
+
+	return 0;
+}
+
+static int st7920_primary_plane_atomic_check(struct drm_plane *plane,
+					      struct drm_atomic_state *state)
+{
+	struct drm_device *drm = plane->dev;
+	struct st7920_device *st7920 = drm_to_st7920(drm);
+	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
+	struct st7920_plane_state *st7920_state = to_st7920_plane_state(plane_state);
+	struct drm_shadow_plane_state *shadow_plane_state = &st7920_state->base;
+	struct drm_crtc *crtc = plane_state->crtc;
+	struct drm_crtc_state *crtc_state = NULL;
+	const struct drm_format_info *fi;
+	unsigned int pitch;
+	int ret;
+
+	if (crtc)
+		crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+	ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state,
+						  DRM_PLANE_NO_SCALING,
+						  DRM_PLANE_NO_SCALING,
+						  false, false);
+	if (ret)
+		return ret;
+	else if (!plane_state->visible)
+		return 0;
+
+	fi = drm_format_info(DRM_FORMAT_R1);
+	if (!fi)
+		return -EINVAL;
+
+	pitch = drm_format_info_min_pitch(fi, 0, st7920->width);
+
+	if (plane_state->fb->format != fi) {
+		void *buf;
+
+		/* format conversion necessary; reserve buffer */
+		buf = drm_format_conv_state_reserve(&shadow_plane_state->fmtcnv_state,
+						    pitch, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+	}
+
+	st7920_state->buffer = kcalloc(pitch, st7920->height, GFP_KERNEL);
+	if (!st7920_state->buffer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void st7920_primary_plane_atomic_update(struct drm_plane *plane,
+						struct drm_atomic_state *state)
+{
+	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
+	struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane);
+	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc);
+	struct st7920_crtc_state *st7920_crtc_state =  to_st7920_crtc_state(crtc_state);
+	struct st7920_plane_state *st7920_plane_state = to_st7920_plane_state(plane_state);
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_atomic_helper_damage_iter iter;
+	struct drm_device *drm = plane->dev;
+	struct drm_rect dst_clip;
+	struct drm_rect damage;
+	int idx;
+
+	if (!drm_dev_enter(drm, &idx))
+		return;
+
+	if (drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE))
+		goto out_drm_dev_exit;
+
+	drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state);
+	drm_atomic_for_each_plane_damage(&iter, &damage) {
+		dst_clip = plane_state->dst;
+
+		if (!drm_rect_intersect(&dst_clip, &damage))
+			continue;
+
+		st7920_fb_blit_rect(fb, &shadow_plane_state->data[0], &dst_clip,
+				     st7920_plane_state->buffer,
+				     st7920_crtc_state->data_array,
+				     &shadow_plane_state->fmtcnv_state);
+	}
+
+	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
+
+out_drm_dev_exit:
+	drm_dev_exit(idx);
+}
+
+static void st7920_primary_plane_atomic_disable(struct drm_plane *plane,
+						 struct drm_atomic_state *state)
+{
+	struct drm_device *drm = plane->dev;
+	struct st7920_device *st7920 = drm_to_st7920(drm);
+	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
+	struct drm_crtc_state *crtc_state;
+	struct st7920_crtc_state *st7920_crtc_state;
+	int idx;
+
+	if (!plane_state->crtc)
+		return;
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc);
+	st7920_crtc_state = to_st7920_crtc_state(crtc_state);
+
+	if (!drm_dev_enter(drm, &idx))
+		return;
+
+	st7920_clear_screen(st7920, st7920_crtc_state->data_array);
+
+	drm_dev_exit(idx);
+}
+
+/* Called during init to allocate the plane's atomic state. */
+static void st7920_primary_plane_reset(struct drm_plane *plane)
+{
+	struct st7920_plane_state *st7920_state;
+
+	drm_WARN_ON_ONCE(plane->dev, plane->state);
+
+	st7920_state = kzalloc(sizeof(*st7920_state), GFP_KERNEL);
+	if (!st7920_state)
+		return;
+
+	__drm_gem_reset_shadow_plane(plane, &st7920_state->base);
+}
+
+static struct drm_plane_state *st7920_primary_plane_duplicate_state(struct drm_plane *plane)
+{
+	struct drm_shadow_plane_state *new_shadow_plane_state;
+	struct st7920_plane_state *old_st7920_state;
+	struct st7920_plane_state *st7920_state;
+
+	if (drm_WARN_ON_ONCE(plane->dev, !plane->state))
+		return NULL;
+
+	old_st7920_state = to_st7920_plane_state(plane->state);
+	st7920_state = kmemdup(old_st7920_state, sizeof(*st7920_state), GFP_KERNEL);
+	if (!st7920_state)
+		return NULL;
+
+	/* The buffer is not duplicated and is allocated in .atomic_check */
+	st7920_state->buffer = NULL;
+
+	new_shadow_plane_state = &st7920_state->base;
+
+	__drm_gem_duplicate_shadow_plane_state(plane, new_shadow_plane_state);
+
+	return &new_shadow_plane_state->base;
+}
+
+static void st7920_primary_plane_destroy_state(struct drm_plane *plane,
+						struct drm_plane_state *state)
+{
+	struct st7920_plane_state *st7920_state = to_st7920_plane_state(state);
+
+	kfree(st7920_state->buffer);
+
+	__drm_gem_destroy_shadow_plane_state(&st7920_state->base);
+
+	kfree(st7920_state);
+}
+
+static const struct drm_plane_helper_funcs st7920_primary_plane_helper_funcs = {
+	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
+	.atomic_check = st7920_primary_plane_atomic_check,
+	.atomic_update = st7920_primary_plane_atomic_update,
+	.atomic_disable = st7920_primary_plane_atomic_disable,
+};
+
+static const struct drm_plane_funcs st7920_primary_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.reset = st7920_primary_plane_reset,
+	.atomic_duplicate_state = st7920_primary_plane_duplicate_state,
+	.atomic_destroy_state = st7920_primary_plane_destroy_state,
+	.destroy = drm_plane_cleanup,
+};
+
+static enum drm_mode_status st7920_crtc_mode_valid(struct drm_crtc *crtc,
+						    const struct drm_display_mode *mode)
+{
+	struct st7920_device *st7920 = drm_to_st7920(crtc->dev);
+
+	return drm_crtc_helper_mode_valid_fixed(crtc, mode, &st7920->mode);
+}
+
+static int st7920_crtc_atomic_check(struct drm_crtc *crtc,
+				     struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	struct st7920_crtc_state *st7920_state = to_st7920_crtc_state(crtc_state);
+	int ret;
+
+	ret = drm_crtc_helper_atomic_check(crtc, state);
+	if (ret)
+		return ret;
+
+	st7920_state->data_array = kmalloc(BYTES_IN_DISPLAY, GFP_KERNEL);
+	if (!st7920_state->data_array)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/* Called during init to allocate the CRTC's atomic state. */
+static void st7920_crtc_reset(struct drm_crtc *crtc)
+{
+	struct st7920_crtc_state *st7920_state;
+
+	drm_WARN_ON_ONCE(crtc->dev, crtc->state);
+
+	st7920_state = kzalloc(sizeof(*st7920_state), GFP_KERNEL);
+	if (!st7920_state)
+		return;
+
+	__drm_atomic_helper_crtc_reset(crtc, &st7920_state->base);
+}
+
+static struct drm_crtc_state *st7920_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+	struct st7920_crtc_state *old_st7920_state;
+	struct st7920_crtc_state *st7920_state;
+
+	if (drm_WARN_ON_ONCE(crtc->dev, !crtc->state))
+		return NULL;
+
+	old_st7920_state = to_st7920_crtc_state(crtc->state);
+	st7920_state = kmemdup(old_st7920_state, sizeof(*st7920_state), GFP_KERNEL);
+	if (!st7920_state)
+		return NULL;
+
+	/* The buffer is not duplicated and is allocated in .atomic_check */
+	st7920_state->data_array = NULL;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &st7920_state->base);
+
+	return &st7920_state->base;
+}
+
+static void st7920_crtc_destroy_state(struct drm_crtc *crtc,
+						struct drm_crtc_state *state)
+{
+	struct st7920_crtc_state *st7920_state = to_st7920_crtc_state(state);
+
+	kfree(st7920_state->data_array);
+
+	__drm_atomic_helper_crtc_destroy_state(state);
+
+	kfree(st7920_state);
+}
+
+/*
+ * The CRTC is always enabled. Screen updates are performed by
+ * the primary plane's atomic_update function. Disabling clears
+ * the screen in the primary plane's atomic_disable function.
+ */
+static const struct drm_crtc_helper_funcs st7920_crtc_helper_funcs = {
+	.mode_valid = st7920_crtc_mode_valid,
+	.atomic_check = st7920_crtc_atomic_check,
+};
+
+static const struct drm_crtc_funcs st7920_crtc_funcs = {
+	.reset = st7920_crtc_reset,
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.atomic_duplicate_state = st7920_crtc_duplicate_state,
+	.atomic_destroy_state = st7920_crtc_destroy_state,
+};
+
+static void st7920_encoder_atomic_enable(struct drm_encoder *encoder,
+						struct drm_atomic_state *state)
+{
+	struct drm_device *drm = encoder->dev;
+	struct st7920_device *st7920 = drm_to_st7920(drm);
+	int ret;
+
+	ret = st7920_init(st7920);
+	if (ret)
+		goto power_off;
+
+	return;
+
+power_off:
+	st7920_power_off(st7920);
+}
+
+static void st7920_encoder_atomic_disable(struct drm_encoder *encoder,
+					struct drm_atomic_state *state)
+{
+	struct drm_device *drm = encoder->dev;
+	struct st7920_device *st7920 = drm_to_st7920(drm);
+
+	st7920_power_off(st7920);
+}
+
+static const struct drm_encoder_helper_funcs st7920_encoder_helper_funcs = {
+	.atomic_enable = st7920_encoder_atomic_enable,
+	.atomic_disable = st7920_encoder_atomic_disable,
+};
+
+static const struct drm_encoder_funcs st7920_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static int st7920_connector_get_modes(struct drm_connector *connector)
+{
+	struct st7920_device *st7920 = drm_to_st7920(connector->dev);
+
+	return drm_connector_helper_get_modes_fixed(connector, &st7920->mode);
+}
+
+static const struct drm_connector_helper_funcs st7920_connector_helper_funcs = {
+	.get_modes = st7920_connector_get_modes,
+};
+
+static const struct drm_connector_funcs st7920_connector_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_mode_config_funcs st7920_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static const uint32_t st7920_formats[] = {
+	DRM_FORMAT_XRGB8888,
+};
+
+DEFINE_DRM_GEM_FOPS(st7920_fops);
+
+static const struct drm_driver st7920_drm_driver = {
+	DRM_GEM_SHMEM_DRIVER_OPS,
+	DRM_FBDEV_SHMEM_DRIVER_OPS,
+	.name			= DRIVER_NAME,
+	.desc			= DRIVER_DESC,
+	.date			= DRIVER_DATE,
+	.major			= DRIVER_MAJOR,
+	.minor			= DRIVER_MINOR,
+	.driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET,
+	.fops			= &st7920_fops,
+};
+
+static int st7920_init_modeset(struct st7920_device *st7920)
+{
+	struct drm_display_mode *mode = &st7920->mode;
+	struct device *dev = st7920->dev;
+	struct drm_device *drm = &st7920->drm;
+	unsigned long max_width, max_height;
+	struct drm_plane *primary_plane;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	int ret;
+
+	/*
+	 * Modesetting
+	 */
+
+	ret = drmm_mode_config_init(drm);
+	if (ret) {
+		dev_err(dev, "DRM mode config init failed: %d\n", ret);
+		return ret;
+	}
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	mode->clock = 1;
+	mode->hdisplay = st7920->device_info->default_width;
+	mode->htotal = st7920->device_info->default_width;
+	mode->hsync_start = st7920->device_info->default_width;
+	mode->hsync_end = st7920->device_info->default_width;
+	mode->vdisplay = st7920->device_info->default_height;
+	mode->vtotal = st7920->device_info->default_height;
+	mode->vsync_start = st7920->device_info->default_height;
+	mode->vsync_end = st7920->device_info->default_height;
+	mode->width_mm = 27;
+	mode->height_mm = 27;
+
+	max_width = max_t(unsigned long, mode->hdisplay, DRM_SHADOW_PLANE_MAX_WIDTH);
+	max_height = max_t(unsigned long, mode->vdisplay, DRM_SHADOW_PLANE_MAX_HEIGHT);
+
+	drm->mode_config.min_width = mode->hdisplay;
+	drm->mode_config.max_width = max_width;
+	drm->mode_config.min_height = mode->vdisplay;
+	drm->mode_config.max_height = max_height;
+	drm->mode_config.preferred_depth = 24;
+	drm->mode_config.funcs = &st7920_mode_config_funcs;
+
+	/* Primary plane */
+
+	primary_plane = &st7920->primary_plane;
+	ret = drm_universal_plane_init(drm, primary_plane, 0, &st7920_primary_plane_funcs,
+				    st7920_formats, ARRAY_SIZE(st7920_formats),
+				    NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret) {
+		dev_err(dev, "DRM primary plane init failed: %d\n", ret);
+		return ret;
+	}
+
+	drm_plane_helper_add(primary_plane, &st7920_primary_plane_helper_funcs);
+
+	drm_plane_enable_fb_damage_clips(primary_plane);
+
+	/* CRTC */
+
+	crtc = &st7920->crtc;
+	ret = drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
+					&st7920_crtc_funcs, NULL);
+	if (ret) {
+		dev_err(dev, "DRM crtc init failed: %d\n", ret);
+		return ret;
+	}
+
+	drm_crtc_helper_add(crtc, &st7920_crtc_helper_funcs);
+
+	/* Encoder */
+
+	encoder = &st7920->encoder;
+	ret = drm_encoder_init(drm, encoder, &st7920_encoder_funcs,
+			       DRM_MODE_ENCODER_NONE, NULL);
+	if (ret) {
+		dev_err(dev, "DRM encoder init failed: %d\n", ret);
+		return ret;
+	}
+
+	drm_encoder_helper_add(encoder, &st7920_encoder_helper_funcs);
+
+	encoder->possible_crtcs = drm_crtc_mask(crtc);
+
+	/* Connector */
+
+	connector = &st7920->connector;
+	ret = drm_connector_init(drm, connector, &st7920_connector_funcs,
+				 DRM_MODE_CONNECTOR_Unknown);
+	if (ret) {
+		dev_err(dev, "DRM connector init failed: %d\n", ret);
+		return ret;
+	}
+
+	drm_connector_helper_add(connector, &st7920_connector_helper_funcs);
+
+	ret = drm_connector_attach_encoder(connector, encoder);
+	if (ret) {
+		dev_err(dev, "DRM attach connector to encoder failed: %d\n", ret);
+		return ret;
+	}
+
+	drm_mode_config_reset(drm);
+
+	return 0;
+}
+
+static int st7920_probe(struct spi_device *spi)
+{
+	struct st7920_device *st7920;
+	struct regmap *regmap;
+	struct device *dev = &spi->dev;
+	struct drm_device *drm;
+	int ret;
+
+	regmap = devm_regmap_init_spi(spi, &st7920_spi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	st7920 = devm_drm_dev_alloc(dev, &st7920_drm_driver,
+				    struct st7920_device, drm);
+	if (IS_ERR(st7920))
+		return PTR_ERR(st7920);
+
+	drm = &st7920->drm;
+
+	st7920->dev = dev;
+	st7920->regmap = regmap;
+	st7920->spi = spi;
+	st7920->device_info = device_get_match_data(dev);
+	st7920->width = st7920->device_info->default_width;
+	st7920->height = st7920->device_info->default_height;
+
+	spi_set_drvdata(spi, st7920);
+
+	ret = st7920_init_modeset(st7920);
+	if (ret)
+		return ret;
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		return dev_err_probe(dev, ret, "DRM device register failed\n");
+
+	drm_client_setup(drm, NULL);
+
+	return 0;
+}
+
+static void st7920_remove(struct spi_device *spi)
+{
+	struct st7920_device *st7920 = spi_get_drvdata(spi);
+
+	drm_dev_unplug(&st7920->drm);
+	drm_atomic_helper_shutdown(&st7920->drm);
+}
+
+static void st7920_shutdown(struct spi_device *spi)
+{
+	struct st7920_device *st7920 = spi_get_drvdata(spi);
+
+	drm_atomic_helper_shutdown(&st7920->drm);
+}
+
+static struct spi_driver st7920_spi_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = st7920_of_match,
+	},
+	.id_table = st7920_spi_id,
+	.probe = st7920_probe,
+	.remove = st7920_remove,
+	.shutdown = st7920_shutdown,
+};
+module_spi_driver(st7920_spi_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Iker Pedrosa <ipedrosam@gmail.com>");
+MODULE_LICENSE("GPL v2");

-- 
2.51.0

Re: [PATCH v3 2/3] drm: Add driver for Sitronix ST7920 LCD displays

[Thomas Zimmermann]

Hi

Am 06.10.25 um 19:48 schrieb Iker Pedrosa:
> Add a new DRM/KMS driver for displays using the Sitronix ST7920
> controller connected via the SPI bus. This provides a standard
> framebuffer interface for these common monochrome LCDs.
>
> Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
> ---
>   drivers/gpu/drm/sitronix/Kconfig  |  10 +
>   drivers/gpu/drm/sitronix/Makefile |   1 +
>   drivers/gpu/drm/sitronix/st7920.c | 892 ++++++++++++++++++++++++++++++++++++++
>   3 files changed, 903 insertions(+)
>
> diff --git a/drivers/gpu/drm/sitronix/Kconfig b/drivers/gpu/drm/sitronix/Kconfig
> index 6de7d92d9b74c72746915b945869dba91f161d2b..f14115350069849b668d75188f6d504d56fa3dda 100644
> --- a/drivers/gpu/drm/sitronix/Kconfig
> +++ b/drivers/gpu/drm/sitronix/Kconfig
> @@ -40,3 +40,13 @@ config DRM_ST7735R
>   
>   	  If M is selected the module will be called st7735r.
>   
> +config DRM_ST7920
> +	tristate "DRM support for Sitronix ST7920 LCD displays"
> +	depends on DRM && SPI && MMU
> +	select DRM_GEM_SHMEM_HELPER
> +	select DRM_KMS_HELPER
> +	select REGMAP_SPI
> +	help
> +	  DRM driver for the ST7920 Sitronix LCD controllers.
> +
> +	  If M is selected the module will be called st7920.
> diff --git a/drivers/gpu/drm/sitronix/Makefile b/drivers/gpu/drm/sitronix/Makefile
> index bd139e5a6995fa026cc635b3c29782473d1efad7..2f064a518121bfee3cca73acd42589e8c54cd4d7 100644
> --- a/drivers/gpu/drm/sitronix/Makefile
> +++ b/drivers/gpu/drm/sitronix/Makefile
> @@ -1,3 +1,4 @@
>   obj-$(CONFIG_DRM_ST7571_I2C)		+= st7571-i2c.o
>   obj-$(CONFIG_DRM_ST7586)		+= st7586.o
>   obj-$(CONFIG_DRM_ST7735R)		+= st7735r.o
> +obj-$(CONFIG_DRM_ST7920))		+= st7920.o
> diff --git a/drivers/gpu/drm/sitronix/st7920.c b/drivers/gpu/drm/sitronix/st7920.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..1306f6f68f37b8ce5665a2c06f5417b94250faa0
> --- /dev/null
> +++ b/drivers/gpu/drm/sitronix/st7920.c
> @@ -0,0 +1,892 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * DRM driver for Sitronix ST7920 LCD displays
> + *
> + * Copyright 2025 Iker Pedrosa <ikerpedrosam@gmail.com>
> + *
> + */
> +
> +#include <linux/bitrev.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_client_setup.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_damage_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fbdev_shmem.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_atomic_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_gem_shmem_helper.h>
> +#include <drm/drm_plane.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#define DRIVER_NAME	"sitronix_st7920"
> +#define DRIVER_DESC	"DRM driver for Sitronix ST7920 LCD displays"
> +#define DRIVER_DATE	"20250723"
> +#define DRIVER_MAJOR	1
> +#define DRIVER_MINOR	0
> +
> +/* Display organization */
> +#define WIDTH_BYTES		16

The correct term is 'pitch'.

> +#define HEIGHT_IN_PIXELS	64

Height is counted in scanlines.

> +#define BYTES_IN_DISPLAY	(WIDTH_BYTES * HEIGHT_IN_PIXELS)
> +#define BYTES_IN_SEGMENT	2
> +#define PIXELS_IN_SEGMENT	(BYTES_IN_SEGMENT * 8)

Not _IN_ but _PER_.

> +
> +/* Sync sequence */
> +#define SYNC_BITS			0xF8
> +#define RW_HIGH				0x04
> +#define RS_HIGH				0x02
> +
> +/* Commands */
> +#define SET_DISPLAY_ON			0x0C
> +#define SET_DISPLAY_OFF			0x08
> +#define SET_DISPLAY_CLEAR		0x01
> +#define SET_BASIC_INSTRUCTION_SET	0x30
> +#define SET_EXT_INSTRUCTION_SET		0x34
> +#define SET_GRAPHICS_DISPLAY		0x36
> +#define SET_GDRAM_ADDRESS		0x80
> +#define SET_GDRAM_DATA			0xFF /* Driver internal command */
> +
> +/* Masks */
> +#define HIGH_DATA_MASK			0xF0
> +#define LOW_DATA_MASK			0x0F
> +#define TOP_VERTICAL_ADDRESS		0x80
> +#define BOTTOM_VERTICAL_ADDRESS		0x60
> +#define TOP_HORIZONTAL_ADDRESS		0x00
> +#define BOTTOM_HORIZONTAL_ADDRESS	0x80
> +
> +#define CMD_SIZE			35
> +
> +enum st7920_variants {
> +	/* st7920 family */
> +	ST7920_ID
> +};
> +
> +struct spi7920_error {
> +	int errno;
> +};
> +
> +struct st7920_deviceinfo {
> +	u32 default_dclk_div;
> +	u32 default_dclk_frq;
> +	u32 default_width;
> +	u32 default_height;
> +};
> +
> +struct st7920_device {
> +	struct drm_device drm;
> +	struct device *dev;
> +	struct drm_display_mode mode;
> +	struct drm_plane primary_plane;
> +	struct drm_crtc crtc;
> +	struct drm_encoder encoder;
> +	struct drm_connector connector;
> +	struct spi_device *spi;
> +
> +	struct regmap *regmap;
> +
> +	const struct st7920_deviceinfo *device_info;
> +
> +	u32 height;
> +	u32 width;
> +};
> +
> +const struct st7920_deviceinfo st7920_variants[] = {
> +	[ST7920_ID] = {
> +		.default_width = 128,
> +		.default_height = 64,
> +	}
> +};
> +EXPORT_SYMBOL_NS_GPL(st7920_variants, DRM_ST7920);
> +
> +struct st7920_plane_state {
> +	struct drm_shadow_plane_state base;
> +	/* Intermediate buffer to convert pixels from XRGB8888 to HW format */
> +	u8 *buffer;
> +};
> +
> +struct st7920_crtc_state {
> +	struct drm_crtc_state base;
> +	/* Buffer to store pixels in HW format and written to the panel */
> +	u8 *data_array;
> +};
> +
> +static inline struct st7920_plane_state *to_st7920_plane_state(struct drm_plane_state *state)
> +{
> +	return container_of(state, struct st7920_plane_state, base.base);
> +}
> +
> +static inline struct st7920_crtc_state *to_st7920_crtc_state(struct drm_crtc_state *state)
> +{
> +	return container_of(state, struct st7920_crtc_state, base);
> +}
> +
> +static inline struct st7920_device *drm_to_st7920(struct drm_device *drm)
> +{
> +	return container_of(drm, struct st7920_device, drm);
> +}
> +
> +static int st7920_write_gdram_address(const void *data, u8 *reg)

For this helper and the next two, 'store' might be better than 'write'. 
Write already means 'send to device'.

> +{
> +	const u8 y_addr = *(const u8 *)data;
> +	bool bottom_screen = (y_addr >= 32);
> +	int i = 0;
> +
> +	reg[i++] = SYNC_BITS;
> +	/* Set vertical address */
> +	if (!bottom_screen)
> +		reg[i++] = TOP_VERTICAL_ADDRESS + (*(uint8_t *)data & HIGH_DATA_MASK);
> +	else
> +		reg[i++] = BOTTOM_VERTICAL_ADDRESS + (*(uint8_t *)data & HIGH_DATA_MASK);
> +
> +	reg[i++] = *(uint8_t *)data << 4;
> +	/* Set horizontal address */
> +	reg[i++] = SET_GDRAM_ADDRESS;
> +	if (!bottom_screen)
> +		reg[i++] = TOP_HORIZONTAL_ADDRESS;
> +	else
> +		reg[i++] = BOTTOM_HORIZONTAL_ADDRESS;
> +
> +	return i;
> +}
> +
> +static int st7920_write_gdram_data(const void *data, u8 *reg)
> +{
> +	const u8 *line_data = data;
> +	int i = 0, j = 0;
> +
> +	reg[i++] = SYNC_BITS | RS_HIGH;
> +
> +	for (j = 0; j < 16; j++) {
> +		reg[i++] = line_data[j] & 0xF0;
> +		reg[i++] = (line_data[j] << 4) & 0xF0;
> +	}
> +
> +	return i;
> +}
> +
> +static int st7920_write_others(int cmd, const void *data, u8 *reg)
> +{
> +	int i = 0;
> +
> +	reg[i++] = SYNC_BITS;
> +	reg[i++] = cmd & HIGH_DATA_MASK;
> +	reg[i++] = (cmd & LOW_DATA_MASK) << 4;
> +
> +	return i;
> +}
> +
> +static int st7920_spi_write(struct spi_device *spi, int cmd, const void *data,
> +			    int delay_us, struct spi7920_error *err)

With the err parameter, you should not need the returned error code any 
longer.

> +{
> +	u8 reg[CMD_SIZE] = {0};
> +	int size = 0;
> +	int ret;
> +
> +	if (err->errno)
> +		return err->errno;
> +
> +	/*
> +	 * First the sync bits are sent: 11111WS0.
> +	 * Where W is the read/write (RW) bit and S is the register/data (RS) bit.
> +	 * Then, every 8 bits instruction/data will be separated into 2 groups.
> +	 * Higher 4 bits (DB7~DB4) will be placed in the first section followed by
> +	 * 4 '0's. And lower 4 bits (DB3~DB0) will be placed in the second section
> +	 * followed by 4 '0's.
> +	 */
> +	if (cmd == SET_GDRAM_ADDRESS)
> +		size = st7920_write_gdram_address(data, reg);
> +	else if (cmd == SET_GDRAM_DATA)
> +		size = st7920_write_gdram_data(data, reg);
> +	else
> +		size = st7920_write_others(cmd, data, reg);
> +
> +	ret = spi_write(spi, reg, size);
> +	if (ret) {
> +		err->errno = ret;
> +		return ret;
> +	}
> +
> +	if (delay_us)
> +		udelay(delay_us);
> +
> +	return ret;
> +}
> +
> +static const struct regmap_config st7920_spi_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static const struct of_device_id st7920_of_match[] = {
> +	/* st7920 family */
> +	{
> +		.compatible = "sitronix,st7920",
> +		.data = &st7920_variants[ST7920_ID],
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, st7920_of_match);
> +
> +/*
> + * The SPI core always reports a MODALIAS uevent of the form "spi:<dev>", even
> + * if the device was registered via OF. This means that the module will not be
> + * auto loaded, unless it contains an alias that matches the MODALIAS reported.
> + *
> + * To workaround this issue, add a SPI device ID table. Even when this should
> + * not be needed for this driver to match the registered SPI devices.
> + */
> +static const struct spi_device_id st7920_spi_id[] = {
> +	/* st7920 family */
> +	{ "st7920",  ST7920_ID },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(spi, st7920_spi_id);
> +
> +static int st7920_power_on(struct st7920_device *st7920)
> +{
> +	struct spi7920_error err = {0};
> +	int ret;
> +
> +	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_ON, NULL, 72, &err);

Hand in err from the caller. This will simplify other code further below.

> +
> +	return ret;
> +}
> +
> +static int st7920_power_off(struct st7920_device *st7920)
> +{
> +	struct spi7920_error err = {0};
> +	int ret;
> +
> +	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err);
> +	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_OFF, NULL, 72, &err);

Rather don't assing to ret here. Just call write everything with err. 
Also hand in err from the caller. to better integrate this code with 
other spi_write functions.

> +
> +	return ret;
> +}
> +
> +static int st7920_init(struct st7920_device *st7920)
> +{
> +	struct spi7920_error err = {0};
> +	int ret;
> +
> +	ret = st7920_spi_write(st7920->spi, SET_BASIC_INSTRUCTION_SET, NULL, 72, &err);
> +	ret = st7920_power_on(st7920);
> +	err.errno = ret;
> +	ret = st7920_spi_write(st7920->spi, SET_GRAPHICS_DISPLAY, NULL, 72, &err);
> +	ret = st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err);
> +	if (ret < 0)
> +		return ret;

Rather don't assign to ret here. Call everything with err and return 
err.errno at the end.

> +
> +	return 0;
> +}
> +
> +static int st7920_update_rect(struct st7920_device *st7920,
> +			       struct drm_rect *rect, u8 *buf,
> +			       u8 *data_array)
> +{
> +	struct spi7920_error err;
> +	u32 array_idx = 0;
> +	int i, j;
> +	int ret;
> +
> +	/*
> +	 * The screen is divided in 64(Y)x8(X) segments and each segment is
> +	 * further divided in 2 bytes (D15~D0).
> +	 *
> +	 * Segment 0x0 is in the top-right corner, while segment 63x15 is in the
> +	 * bottom-left. They would be displayed in the screen in the following way:
> +	 * 0x0  0x1  0x2  ... 0x15
> +	 * 1x0  1x1  1x2  ... 1x15
> +	 * ...
> +	 * 63x0 63x1 63x2 ... 63x15
> +	 *
> +	 * The data in each byte is big endian.
> +	 */
> +
> +	for (i = 0; i < HEIGHT_IN_PIXELS; i++) {
> +		u8 *line_start = buf + (i * WIDTH_BYTES);
> +		u8 line_buffer[WIDTH_BYTES];
> +
> +		for (j = 0; j < WIDTH_BYTES; j++) {
> +			line_buffer[j] = bitrev8(line_start[j]);
> +			data_array[array_idx++] = line_buffer[j];
> +		}
> +
> +		ret = st7920_spi_write(st7920->spi, SET_GDRAM_ADDRESS, &i, 72, &err);
> +		ret = st7920_spi_write(st7920->spi, SET_GDRAM_DATA, line_buffer, 72, &err);
> +		if (ret < 0)
> +			return ret;

This is one of the cases where you cannot do anything about the error. 
Returning an error has little value. It's usually advisable to again 
pass in err from the caller. In the outer-most helper (atomic_*) you 
could use drm_err_once() to print an error message on the first of these 
failures.

> +	}
> +
> +	return ret;
> +}
> +
> +static void st7920_clear_screen(struct st7920_device *st7920, u8 *data_array)
> +{
> +	struct spi7920_error err;
> +
> +	memset(data_array, 0, BYTES_IN_DISPLAY);
> +
> +	st7920_spi_write(st7920->spi, SET_DISPLAY_CLEAR, NULL, 1600, &err);
> +}
> +
> +static int st7920_fb_blit_rect(struct drm_framebuffer *fb,
> +				const struct iosys_map *vmap,
> +				struct drm_rect *rect,
> +				u8 *buf, u8 *data_array,
> +				struct drm_format_conv_state *fmtcnv_state)
> +{
> +	struct st7920_device *st7920 = drm_to_st7920(fb->dev);
> +	struct iosys_map dst;
> +	unsigned int dst_pitch;
> +
> +	/* Align y to display page boundaries */
> +	rect->y1 = round_down(rect->y1, PIXELS_IN_SEGMENT);
> +	rect->y2 = min_t(unsigned int, round_up(rect->y2, PIXELS_IN_SEGMENT), st7920->height);
> +
> +	dst_pitch = DIV_ROUND_UP(drm_rect_width(rect), 8);
> +
> +	iosys_map_set_vaddr(&dst, buf);
> +	drm_fb_xrgb8888_to_mono(&dst, &dst_pitch, vmap, fb, rect, fmtcnv_state);
> +
> +	st7920_update_rect(st7920, rect, buf, data_array);
> +
> +	return 0;
> +}
> +
> +static int st7920_primary_plane_atomic_check(struct drm_plane *plane,
> +					      struct drm_atomic_state *state)
> +{
> +	struct drm_device *drm = plane->dev;
> +	struct st7920_device *st7920 = drm_to_st7920(drm);
> +	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
> +	struct st7920_plane_state *st7920_state = to_st7920_plane_state(plane_state);
> +	struct drm_shadow_plane_state *shadow_plane_state = &st7920_state->base;
> +	struct drm_crtc *crtc = plane_state->crtc;
> +	struct drm_crtc_state *crtc_state = NULL;
> +	const struct drm_format_info *fi;
> +	unsigned int pitch;
> +	int ret;
> +
> +	if (crtc)
> +		crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> +
> +	ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state,
> +						  DRM_PLANE_NO_SCALING,
> +						  DRM_PLANE_NO_SCALING,
> +						  false, false);
> +	if (ret)
> +		return ret;
> +	else if (!plane_state->visible)
> +		return 0;
> +
> +	fi = drm_format_info(DRM_FORMAT_R1);
> +	if (!fi)
> +		return -EINVAL;
> +
> +	pitch = drm_format_info_min_pitch(fi, 0, st7920->width);
> +
> +	if (plane_state->fb->format != fi) {
> +		void *buf;
> +
> +		/* format conversion necessary; reserve buffer */
> +		buf = drm_format_conv_state_reserve(&shadow_plane_state->fmtcnv_state,
> +						    pitch, GFP_KERNEL);
> +		if (!buf)
> +			return -ENOMEM;
> +	}
> +
> +	st7920_state->buffer = kcalloc(pitch, st7920->height, GFP_KERNEL);
> +	if (!st7920_state->buffer)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +
> +static void st7920_primary_plane_atomic_update(struct drm_plane *plane,
> +						struct drm_atomic_state *state)
> +{
> +	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
> +	struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane);
> +	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
> +	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc);
> +	struct st7920_crtc_state *st7920_crtc_state =  to_st7920_crtc_state(crtc_state);
> +	struct st7920_plane_state *st7920_plane_state = to_st7920_plane_state(plane_state);
> +	struct drm_framebuffer *fb = plane_state->fb;
> +	struct drm_atomic_helper_damage_iter iter;
> +	struct drm_device *drm = plane->dev;
> +	struct drm_rect dst_clip;
> +	struct drm_rect damage;
> +	int idx;
> +
> +	if (!drm_dev_enter(drm, &idx))
> +		return;
> +
> +	if (drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE))
> +		goto out_drm_dev_exit;
> +
> +	drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state);
> +	drm_atomic_for_each_plane_damage(&iter, &damage) {
> +		dst_clip = plane_state->dst;
> +
> +		if (!drm_rect_intersect(&dst_clip, &damage))
> +			continue;
> +
> +		st7920_fb_blit_rect(fb, &shadow_plane_state->data[0], &dst_clip,
> +				     st7920_plane_state->buffer,
> +				     st7920_crtc_state->data_array,
> +				     &shadow_plane_state->fmtcnv_state);
> +	}
> +
> +	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
> +
> +out_drm_dev_exit:
> +	drm_dev_exit(idx);
> +}
> +
> +static void st7920_primary_plane_atomic_disable(struct drm_plane *plane,
> +						 struct drm_atomic_state *state)
> +{
> +	struct drm_device *drm = plane->dev;
> +	struct st7920_device *st7920 = drm_to_st7920(drm);
> +	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
> +	struct drm_crtc_state *crtc_state;
> +	struct st7920_crtc_state *st7920_crtc_state;
> +	int idx;
> +
> +	if (!plane_state->crtc)
> +		return;
> +
> +	crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc);
> +	st7920_crtc_state = to_st7920_crtc_state(crtc_state);
> +
> +	if (!drm_dev_enter(drm, &idx))
> +		return;
> +
> +	st7920_clear_screen(st7920, st7920_crtc_state->data_array);
> +
> +	drm_dev_exit(idx);
> +}
> +
> +/* Called during init to allocate the plane's atomic state. */
> +static void st7920_primary_plane_reset(struct drm_plane *plane)
> +{
> +	struct st7920_plane_state *st7920_state;
> +
> +	drm_WARN_ON_ONCE(plane->dev, plane->state);
> +
> +	st7920_state = kzalloc(sizeof(*st7920_state), GFP_KERNEL);
> +	if (!st7920_state)
> +		return;
> +
> +	__drm_gem_reset_shadow_plane(plane, &st7920_state->base);
> +}
> +
> +static struct drm_plane_state *st7920_primary_plane_duplicate_state(struct drm_plane *plane)
> +{
> +	struct drm_shadow_plane_state *new_shadow_plane_state;
> +	struct st7920_plane_state *old_st7920_state;
> +	struct st7920_plane_state *st7920_state;
> +
> +	if (drm_WARN_ON_ONCE(plane->dev, !plane->state))
> +		return NULL;
> +
> +	old_st7920_state = to_st7920_plane_state(plane->state);
> +	st7920_state = kmemdup(old_st7920_state, sizeof(*st7920_state), GFP_KERNEL);
> +	if (!st7920_state)
> +		return NULL;
> +
> +	/* The buffer is not duplicated and is allocated in .atomic_check */
> +	st7920_state->buffer = NULL;
> +
> +	new_shadow_plane_state = &st7920_state->base;
> +
> +	__drm_gem_duplicate_shadow_plane_state(plane, new_shadow_plane_state);
> +
> +	return &new_shadow_plane_state->base;
> +}
> +
> +static void st7920_primary_plane_destroy_state(struct drm_plane *plane,
> +						struct drm_plane_state *state)
> +{
> +	struct st7920_plane_state *st7920_state = to_st7920_plane_state(state);
> +
> +	kfree(st7920_state->buffer);
> +
> +	__drm_gem_destroy_shadow_plane_state(&st7920_state->base);
> +
> +	kfree(st7920_state);
> +}
> +
> +static const struct drm_plane_helper_funcs st7920_primary_plane_helper_funcs = {
> +	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
> +	.atomic_check = st7920_primary_plane_atomic_check,
> +	.atomic_update = st7920_primary_plane_atomic_update,
> +	.atomic_disable = st7920_primary_plane_atomic_disable,
> +};
> +
> +static const struct drm_plane_funcs st7920_primary_plane_funcs = {
> +	.update_plane = drm_atomic_helper_update_plane,
> +	.disable_plane = drm_atomic_helper_disable_plane,
> +	.reset = st7920_primary_plane_reset,
> +	.atomic_duplicate_state = st7920_primary_plane_duplicate_state,
> +	.atomic_destroy_state = st7920_primary_plane_destroy_state,
> +	.destroy = drm_plane_cleanup,
> +};
> +
> +static enum drm_mode_status st7920_crtc_mode_valid(struct drm_crtc *crtc,
> +						    const struct drm_display_mode *mode)
> +{
> +	struct st7920_device *st7920 = drm_to_st7920(crtc->dev);
> +
> +	return drm_crtc_helper_mode_valid_fixed(crtc, mode, &st7920->mode);
> +}
> +
> +static int st7920_crtc_atomic_check(struct drm_crtc *crtc,
> +				     struct drm_atomic_state *state)
> +{
> +	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> +	struct st7920_crtc_state *st7920_state = to_st7920_crtc_state(crtc_state);
> +	int ret;
> +
> +	ret = drm_crtc_helper_atomic_check(crtc, state);
> +	if (ret)
> +		return ret;
> +
> +	st7920_state->data_array = kmalloc(BYTES_IN_DISPLAY, GFP_KERNEL);
> +	if (!st7920_state->data_array)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +
> +/* Called during init to allocate the CRTC's atomic state. */
> +static void st7920_crtc_reset(struct drm_crtc *crtc)
> +{
> +	struct st7920_crtc_state *st7920_state;
> +
> +	drm_WARN_ON_ONCE(crtc->dev, crtc->state);
> +
> +	st7920_state = kzalloc(sizeof(*st7920_state), GFP_KERNEL);
> +	if (!st7920_state)
> +		return;
> +
> +	__drm_atomic_helper_crtc_reset(crtc, &st7920_state->base);
> +}
> +
> +static struct drm_crtc_state *st7920_crtc_duplicate_state(struct drm_crtc *crtc)
> +{
> +	struct st7920_crtc_state *old_st7920_state;
> +	struct st7920_crtc_state *st7920_state;
> +
> +	if (drm_WARN_ON_ONCE(crtc->dev, !crtc->state))
> +		return NULL;
> +
> +	old_st7920_state = to_st7920_crtc_state(crtc->state);
> +	st7920_state = kmemdup(old_st7920_state, sizeof(*st7920_state), GFP_KERNEL);
> +	if (!st7920_state)
> +		return NULL;
> +
> +	/* The buffer is not duplicated and is allocated in .atomic_check */
> +	st7920_state->data_array = NULL;
> +
> +	__drm_atomic_helper_crtc_duplicate_state(crtc, &st7920_state->base);
> +
> +	return &st7920_state->base;
> +}
> +
> +static void st7920_crtc_destroy_state(struct drm_crtc *crtc,
> +						struct drm_crtc_state *state)
> +{
> +	struct st7920_crtc_state *st7920_state = to_st7920_crtc_state(state);
> +
> +	kfree(st7920_state->data_array);
> +
> +	__drm_atomic_helper_crtc_destroy_state(state);
> +
> +	kfree(st7920_state);
> +}
> +
> +/*
> + * The CRTC is always enabled. Screen updates are performed by
> + * the primary plane's atomic_update function. Disabling clears
> + * the screen in the primary plane's atomic_disable function.
> + */
> +static const struct drm_crtc_helper_funcs st7920_crtc_helper_funcs = {
> +	.mode_valid = st7920_crtc_mode_valid,
> +	.atomic_check = st7920_crtc_atomic_check,
> +};
> +
> +static const struct drm_crtc_funcs st7920_crtc_funcs = {
> +	.reset = st7920_crtc_reset,
> +	.destroy = drm_crtc_cleanup,
> +	.set_config = drm_atomic_helper_set_config,
> +	.page_flip = drm_atomic_helper_page_flip,
> +	.atomic_duplicate_state = st7920_crtc_duplicate_state,
> +	.atomic_destroy_state = st7920_crtc_destroy_state,
> +};
> +
> +static void st7920_encoder_atomic_enable(struct drm_encoder *encoder,
> +						struct drm_atomic_state *state)

 From what I understand, this needs to be a CRTC helper; not an encoder 
helper.

> +{
> +	struct drm_device *drm = encoder->dev;
> +	struct st7920_device *st7920 = drm_to_st7920(drm);
> +	int ret;
> +

You need drm_dev_enter() and drm_dev_exit() in this helper.

> +	ret = st7920_init(st7920);
> +	if (ret)
> +		goto power_off;
> +
> +	return;
> +
> +power_off:
> +	st7920_power_off(st7920);

We don't use error cleanup in atomic_enable/_disable. Anything at this 
point assumes that DRM is in a consistent software state. So errors can 
only come from the hardware. Trying to revert HW state would likely make 
things worse.

(Note that atomic_disable absolutely does error cleanups, but never 
touches hardware.)

> +}
> +
> +static void st7920_encoder_atomic_disable(struct drm_encoder *encoder,
> +					struct drm_atomic_state *state)

Same comments as for _encoder_atomic_enable.

Best regards
Thomas

> +{
> +	struct drm_device *drm = encoder->dev;
> +	struct st7920_device *st7920 = drm_to_st7920(drm);
> +
> +	st7920_power_off(st7920);
> +}
> +
> +static const struct drm_encoder_helper_funcs st7920_encoder_helper_funcs = {
> +	.atomic_enable = st7920_encoder_atomic_enable,
> +	.atomic_disable = st7920_encoder_atomic_disable,
> +};
> +
> +static const struct drm_encoder_funcs st7920_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
> +static int st7920_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct st7920_device *st7920 = drm_to_st7920(connector->dev);
> +
> +	return drm_connector_helper_get_modes_fixed(connector, &st7920->mode);
> +}
> +
> +static const struct drm_connector_helper_funcs st7920_connector_helper_funcs = {
> +	.get_modes = st7920_connector_get_modes,
> +};
> +
> +static const struct drm_connector_funcs st7920_connector_funcs = {
> +	.reset = drm_atomic_helper_connector_reset,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static const struct drm_mode_config_funcs st7920_mode_config_funcs = {
> +	.fb_create = drm_gem_fb_create_with_dirty,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static const uint32_t st7920_formats[] = {
> +	DRM_FORMAT_XRGB8888,
> +};
> +
> +DEFINE_DRM_GEM_FOPS(st7920_fops);
> +
> +static const struct drm_driver st7920_drm_driver = {
> +	DRM_GEM_SHMEM_DRIVER_OPS,
> +	DRM_FBDEV_SHMEM_DRIVER_OPS,
> +	.name			= DRIVER_NAME,
> +	.desc			= DRIVER_DESC,
> +	.date			= DRIVER_DATE,
> +	.major			= DRIVER_MAJOR,
> +	.minor			= DRIVER_MINOR,
> +	.driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET,
> +	.fops			= &st7920_fops,
> +};
> +
> +static int st7920_init_modeset(struct st7920_device *st7920)
> +{
> +	struct drm_display_mode *mode = &st7920->mode;
> +	struct device *dev = st7920->dev;
> +	struct drm_device *drm = &st7920->drm;
> +	unsigned long max_width, max_height;
> +	struct drm_plane *primary_plane;
> +	struct drm_crtc *crtc;
> +	struct drm_encoder *encoder;
> +	struct drm_connector *connector;
> +	int ret;
> +
> +	/*
> +	 * Modesetting
> +	 */
> +
> +	ret = drmm_mode_config_init(drm);
> +	if (ret) {
> +		dev_err(dev, "DRM mode config init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER;
> +	mode->clock = 1;
> +	mode->hdisplay = st7920->device_info->default_width;
> +	mode->htotal = st7920->device_info->default_width;
> +	mode->hsync_start = st7920->device_info->default_width;
> +	mode->hsync_end = st7920->device_info->default_width;
> +	mode->vdisplay = st7920->device_info->default_height;
> +	mode->vtotal = st7920->device_info->default_height;
> +	mode->vsync_start = st7920->device_info->default_height;
> +	mode->vsync_end = st7920->device_info->default_height;
> +	mode->width_mm = 27;
> +	mode->height_mm = 27;
> +
> +	max_width = max_t(unsigned long, mode->hdisplay, DRM_SHADOW_PLANE_MAX_WIDTH);
> +	max_height = max_t(unsigned long, mode->vdisplay, DRM_SHADOW_PLANE_MAX_HEIGHT);
> +
> +	drm->mode_config.min_width = mode->hdisplay;
> +	drm->mode_config.max_width = max_width;
> +	drm->mode_config.min_height = mode->vdisplay;
> +	drm->mode_config.max_height = max_height;
> +	drm->mode_config.preferred_depth = 24;
> +	drm->mode_config.funcs = &st7920_mode_config_funcs;
> +
> +	/* Primary plane */
> +
> +	primary_plane = &st7920->primary_plane;
> +	ret = drm_universal_plane_init(drm, primary_plane, 0, &st7920_primary_plane_funcs,
> +				    st7920_formats, ARRAY_SIZE(st7920_formats),
> +				    NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> +	if (ret) {
> +		dev_err(dev, "DRM primary plane init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_plane_helper_add(primary_plane, &st7920_primary_plane_helper_funcs);
> +
> +	drm_plane_enable_fb_damage_clips(primary_plane);
> +
> +	/* CRTC */
> +
> +	crtc = &st7920->crtc;
> +	ret = drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
> +					&st7920_crtc_funcs, NULL);
> +	if (ret) {
> +		dev_err(dev, "DRM crtc init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_crtc_helper_add(crtc, &st7920_crtc_helper_funcs);
> +
> +	/* Encoder */
> +
> +	encoder = &st7920->encoder;
> +	ret = drm_encoder_init(drm, encoder, &st7920_encoder_funcs,
> +			       DRM_MODE_ENCODER_NONE, NULL);
> +	if (ret) {
> +		dev_err(dev, "DRM encoder init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_encoder_helper_add(encoder, &st7920_encoder_helper_funcs);
> +
> +	encoder->possible_crtcs = drm_crtc_mask(crtc);
> +
> +	/* Connector */
> +
> +	connector = &st7920->connector;
> +	ret = drm_connector_init(drm, connector, &st7920_connector_funcs,
> +				 DRM_MODE_CONNECTOR_Unknown);
> +	if (ret) {
> +		dev_err(dev, "DRM connector init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_connector_helper_add(connector, &st7920_connector_helper_funcs);
> +
> +	ret = drm_connector_attach_encoder(connector, encoder);
> +	if (ret) {
> +		dev_err(dev, "DRM attach connector to encoder failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_mode_config_reset(drm);
> +
> +	return 0;
> +}
> +
> +static int st7920_probe(struct spi_device *spi)
> +{
> +	struct st7920_device *st7920;
> +	struct regmap *regmap;
> +	struct device *dev = &spi->dev;
> +	struct drm_device *drm;
> +	int ret;
> +
> +	regmap = devm_regmap_init_spi(spi, &st7920_spi_regmap_config);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	st7920 = devm_drm_dev_alloc(dev, &st7920_drm_driver,
> +				    struct st7920_device, drm);
> +	if (IS_ERR(st7920))
> +		return PTR_ERR(st7920);
> +
> +	drm = &st7920->drm;
> +
> +	st7920->dev = dev;
> +	st7920->regmap = regmap;
> +	st7920->spi = spi;
> +	st7920->device_info = device_get_match_data(dev);
> +	st7920->width = st7920->device_info->default_width;
> +	st7920->height = st7920->device_info->default_height;
> +
> +	spi_set_drvdata(spi, st7920);
> +
> +	ret = st7920_init_modeset(st7920);
> +	if (ret)
> +		return ret;
> +
> +	ret = drm_dev_register(drm, 0);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "DRM device register failed\n");
> +
> +	drm_client_setup(drm, NULL);
> +
> +	return 0;
> +}
> +
> +static void st7920_remove(struct spi_device *spi)
> +{
> +	struct st7920_device *st7920 = spi_get_drvdata(spi);
> +
> +	drm_dev_unplug(&st7920->drm);
> +	drm_atomic_helper_shutdown(&st7920->drm);
> +}
> +
> +static void st7920_shutdown(struct spi_device *spi)
> +{
> +	struct st7920_device *st7920 = spi_get_drvdata(spi);
> +
> +	drm_atomic_helper_shutdown(&st7920->drm);
> +}
> +
> +static struct spi_driver st7920_spi_driver = {
> +	.driver = {
> +		.name = DRIVER_NAME,
> +		.of_match_table = st7920_of_match,
> +	},
> +	.id_table = st7920_spi_id,
> +	.probe = st7920_probe,
> +	.remove = st7920_remove,
> +	.shutdown = st7920_shutdown,
> +};
> +module_spi_driver(st7920_spi_driver);
> +
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_AUTHOR("Iker Pedrosa <ipedrosam@gmail.com>");
> +MODULE_LICENSE("GPL v2");
>

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)

[PATCH v3 3/3] MAINTAINERS: Add entry for Sitronix ST7920 driver

[Iker Pedrosa]

Add Iker as ST7920 driver maintainer.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5ddf37f0acc960039422ef988cadfa7176972fc5..79b8a277e38b55ebcff05450d6c565c0d87c6b51 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7861,6 +7861,13 @@ T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
 F:	drivers/gpu/drm/sitronix/st7735r.c
 
+DRM DRIVER FOR SITRONIX ST7920 LCD DISPLAYS
+M:	Iker Pedrosa <ikerpedrosam@gmail.com>
+S:	Maintained
+T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
+F:	Documentation/devicetree/bindings/display/sitronix,st7920.yaml
+F:	drivers/gpu/drm/sitronix/st7920.c
+
 DRM DRIVER FOR SOLOMON SSD130X OLED DISPLAYS
 M:	Javier Martinez Canillas <javierm@redhat.com>
 S:	Maintained

-- 
2.51.0