From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Eddie James <eajames@linux.ibm.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <conor+dt@kernel.org>,
<krzk+dt@kernel.org>, <robh@kernel.org>, <andy@kernel.org>,
<nuno.sa@analog.com>, <dlechner@baylibre.com>, <jic23@kernel.org>
Subject: Re: [PATCH v8] dt-bindings: iio: Add Infineon DPS310 sensor documentation
Date: Tue, 7 Oct 2025 16:57:54 +0100 [thread overview]
Message-ID: <20251007165754.00001e8e@huawei.com> (raw)
In-Reply-To: <20251006181040.25845-1-eajames@linux.ibm.com>
On Mon, 6 Oct 2025 13:10:40 -0500
Eddie James <eajames@linux.ibm.com> wrote:
> The DPS310 is a barometric pressure and temperature sensor with
> an I2C interface. Remove it from trivial-devices.yaml and add its
> own documentation, with a hwmon iio channel consumer example.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> ---
> Changes since v7:
> - Add consumer example and update commit message slightly
Ah. Sorry I was unclear on my feedback wrt to this. I was just
looking for a statement in the commit message to say that you were
doing this to allow for consumers such as the iio/hwmon bridge.
I wasn't expecting any change to the example.
+ the supplies as per reply on previous version I just sent.
>
> .../iio/pressure/infineon,dps310.yaml | 48 +++++++++++++++++++
> .../devicetree/bindings/trivial-devices.yaml | 2 -
> MAINTAINERS | 1 +
> 3 files changed, 49 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
> new file mode 100644
> index 0000000000000..f35ef2ce74d6f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Infineon DPS310 barometric pressure and temperature sensor
> +
> +maintainers:
> + - Eddie James <eajames@linux.ibm.com>
> +
> +description:
> + The DPS310 is a barometric pressure and temperature sensor with an I2C
> + interface.
> +
> +properties:
> + compatible:
> + enum:
> + - infineon,dps310
> +
> + reg:
> + maxItems: 1
> +
> + "#io-channel-cells":
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&dps 0>;
> + };
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dps: pressure-sensor@76 {
> + compatible = "infineon,dps310";
> + reg = <0x76>;
> + #io-channel-cells = <0>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 58ff948d93c96..a76c58f3b1de4 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -127,8 +127,6 @@ properties:
> - ibm,cffps2
> # IBM On-Chip Controller hwmon device
> - ibm,p8-occ-hwmon
> - # Infineon barometric pressure and temperature sensor
> - - infineon,dps310
> # Infineon IR36021 digital POL buck controller
> - infineon,ir36021
> # Infineon IRPS5401 Voltage Regulator (PMIC)
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3773c74b31d6d..bde80ddb99e9d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12217,6 +12217,7 @@ INFINEON DPS310 Driver
> M: Eddie James <eajames@linux.ibm.com>
> L: linux-iio@vger.kernel.org
> S: Maintained
> +F: Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
> F: drivers/iio/pressure/dps310.c
>
> INFINEON PEB2466 ASoC CODEC
prev parent reply other threads:[~2025-10-07 15:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-06 18:10 [PATCH v8] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
2025-10-07 15:57 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251007165754.00001e8e@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=eajames@linux.ibm.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).