On Wed, Oct 08, 2025 at 03:37:12PM +0530, Lakshay Piplani wrote:
> Add bindings for the NXP P3T175x (P3T1750/P3T1755) temperature
> sensor, supporting both I2C & I3C interfaces.
> 
> The P3T1750 and P3T1755 are functionally equivalent temperature
> sensors with identical interfaces and features. The P3T1755 offers
> improved accuracy(±0.5°C) in the –20°C to +85°C range, while both
> maintain ±1°C accuracy across –40°C to +125°C.
> 
> Signed-off-by: Lakshay Piplani <lakshay.piplani@nxp.com>
> ---
> V3 -> V4: Changes since V3:
> 	  - Updated commit message to clarify the difference between P3T1750 and P3T1755.
> V2 -> V3: Changes since V2:
>           - Removed nxp,interrupt-mode and nxp,fault-queue properties from DT binding
>           - Updated compatible strings:
>             - nxp,p3t1750-iio → nxp,p3t1750dp
>             - nxp,p3t1755-iio → nxp,p3t1755dp
> V1 -> V2: Changes since V1:
>           - Dropped nxp,alert-active-high
>           - Fixed YAML formatting, line wrapping, and examples
> 
>  .../bindings/iio/temperature/nxp,p3t1755.yaml | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/temperature/nxp,p3t1755.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/temperature/nxp,p3t1755.yaml b/Documentation/devicetree/bindings/iio/temperature/nxp,p3t1755.yaml
> new file mode 100644
> index 000000000000..16a01fa81251
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/temperature/nxp,p3t1755.yaml

This filename should actually match the compatible, so you're missing
dp.
dG
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/temperature/nxp,p3t1755.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP P3T175xDP Temperature Sensor
> +
> +maintainers:
> +  - Lakshay Piplani <lakshay.piplani@nxp.com>
> +
> +description: |
> +  Datasheet: https://www.nxp.com/docs/en/data-sheet/P3T1755.pdf
> +
> +  P3T175xDP (P3T1750/P3T1755) is a digital temperature sensor with a range of
> +  -40°C to +125°C and a 12-bit resolution. It supports communication over both
> +  I2C and I3C interfaces.
> +
> +  The I2C interface supports up to 32 static addresses and provides an ALERT
> +  output to signal when temperature thresholds are crossed.
> +
> +  The I3C interface supports In-Band interrupts (IBI) in interrupt mode,
> +  allowing the device to notify the controller of threshold events without
> +  dedicated alert pin.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,p3t1750dp
> +      - nxp,p3t1755dp
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +    description: |
> +      In I2C mode, the device supports up to 32 static addresses.
> +      In I3C mode, the 'reg' property encodes a triplet of
> +      <static-address BCR PID> used for device matching.
> +      Static address is optional if matching is done via PID.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        temp-sensor@48 {
> +            compatible = "nxp,p3t1755dp";
> +            reg = <0x48>;
> +            interrupt-parent = <&gpio2>;
> +            interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> +        };
> +    };
> -- 
> 2.25.1
>