From: Conor Dooley <conor@kernel.org>
To: Svyatoslav Ryhel <clamor95@gmail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Douglas Anderson <dianders@chromium.org>,
Sam Ravnborg <sam@ravnborg.org>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v2 1/7] dt-bindings: display: panel: properly document LG LD070WX3 panel
Date: Wed, 8 Oct 2025 22:11:24 +0100 [thread overview]
Message-ID: <20251008-safely-reach-9274474a2ec8@spud> (raw)
In-Reply-To: <20251008082800.67718-2-clamor95@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3756 bytes --]
On Wed, Oct 08, 2025 at 11:27:53AM +0300, Svyatoslav Ryhel wrote:
> LG LD070WX3-SL01 was mistakenly documented as a simple DSI panel, which it
> clearly is not. Address this by adding the proper schema for this panel.
>
> There is only one user of this panel binding in the mainline Linux kernel,
> which is the Nvidia tablet Tegra Note 7. Its panel is broken anyway since
> it cannot initialize properly if the bootloader does not leave a
> pre-initialized panel. It also cannot suspend or re-initialize properly,
> since no DSI configuration is set and it has a loose regulator which
> relies on an always-on property rather than being hooked to the panel
> where it belongs.
I think this is a reasonable justification. For my own enlightenment,
what happens if a new kernel uses the old simple-panel devicetree?
> Tegra Note 7 device tree is adjusted as a part of this series.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/display/panel/lg,ld070wx3.yaml | 60 +++++++++++++++++++
> .../display/panel/panel-simple-dsi.yaml | 2 -
> 2 files changed, 60 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/panel/lg,ld070wx3.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3.yaml b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3.yaml
> new file mode 100644
> index 000000000000..0a82cf311452
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3.yaml#
Could you make the filename match the compatible please?
With that,
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cheers,
Conor.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LG Corporation 7" WXGA TFT LCD panel
> +
> +maintainers:
> + - Svyatoslav Ryhel <clamor95@gmail.com>
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - const: lg,ld070wx3-sl01
> +
> + reg:
> + maxItems: 1
> +
> + vdd-supply: true
> + vcc-supply: true
> +
> + backlight: true
> + port: true
> +
> +required:
> + - compatible
> + - vdd-supply
> + - vcc-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + dsi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel@0 {
> + compatible = "lg,ld070wx3-sl01";
> + reg = <0>;
> +
> + vdd-supply = <&vdd_3v3_lcd>;
> + vcc-supply = <&vcc_1v8_lcd>;
> +
> + backlight = <&backlight>;
> +
> + port {
> + endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
> index 9b92a05791cc..f9f1e76a810c 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
> @@ -42,8 +42,6 @@ properties:
> - kingdisplay,kd097d04
> # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
> - lg,acx467akm-7
> - # LG Corporation 7" WXGA TFT LCD panel
> - - lg,ld070wx3-sl01
> # LG Corporation 5" HD TFT LCD panel
> - lg,lh500wx1-sd03
> # Lincoln LCD197 5" 1080x1920 LCD panel
> --
> 2.48.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2025-10-08 21:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-08 8:27 [PATCH v2 0/7] Add support for panels found in various Tegra devices Svyatoslav Ryhel
2025-10-08 8:27 ` [PATCH v2 1/7] dt-bindings: display: panel: properly document LG LD070WX3 panel Svyatoslav Ryhel
2025-10-08 21:11 ` Conor Dooley [this message]
2025-10-09 5:06 ` Svyatoslav Ryhel
2025-10-09 17:01 ` Conor Dooley
2025-10-08 8:27 ` [PATCH v2 2/7] gpu/drm: panel: add support for LG LD070WX3-SL01 MIPI DSI panel Svyatoslav Ryhel
2025-10-08 21:11 ` Doug Anderson
2025-10-08 8:27 ` [PATCH v2 3/7] ARM: tn7: adjust panel node Svyatoslav Ryhel
2025-10-08 8:27 ` [PATCH v2 4/7] dt-bindings: display: panel: document Samsung LTL106AL01 simple panel Svyatoslav Ryhel
2025-10-08 8:27 ` [PATCH v2 5/7] gpu/drm: panel: simple-panel: add Samsung LTL106AL01 LVDS panel support Svyatoslav Ryhel
2025-10-08 8:27 ` [PATCH v2 6/7] dt-bindings: display: panel: document Samsung LTL106HL02 MIPI DSI panel Svyatoslav Ryhel
2025-10-08 8:27 ` [PATCH v2 7/7] gpu/drm: panel: add Samsung LTL106HL02 MIPI DSI panel driver Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251008-safely-reach-9274474a2ec8@spud \
--to=conor@kernel.org \
--cc=airlied@gmail.com \
--cc=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=sam@ravnborg.org \
--cc=simona@ffwll.ch \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).