From: Baojun Xu <baojun.xu@ti.com>
To: <broonie@kernel.org>, <tiwai@suse.de>
Cc: <andriy.shevchenko@linux.intel.com>, <13916275206@139.com>,
<shenghao-ding@ti.com>, <baojun.xu@ti.com>,
<linux-sound@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lgirdwood@gmail.com>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <devicetree@vger.kernel.org>,
<k-yi@ti.com>, <henry.lo@ti.com>, <robinchen@ti.com>,
<jesse-ji@ti.com>, <will-wang@ti.com>, <jim.shil@goertek.com>,
<toastcheng@google.com>, <chinkaiting@google.com>
Subject: [PATCH v5 1/2] ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
Date: Wed, 8 Oct 2025 12:54:58 +0800 [thread overview]
Message-ID: <20251008045500.44477-1-baojun.xu@ti.com> (raw)
TAS5802/TAS5815/TAS5828 has on-chip DSP without current/voltage feedback.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
---
v5:
- No update for this patch
v4:
- Change the patch title
- Add for TAS5802 support
v3:
- Rewrite the patch title
- Add for TAS5815 support
v2:
- Update description for TAS5828
- Change commit tree to .../tiwai/sound.git
---
include/sound/tas2781.h | 3 +++
sound/soc/codecs/tas2781-i2c.c | 21 +++++++++++++++++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
index ddd997ac3216..0fbcdb15c74b 100644
--- a/include/sound/tas2781.h
+++ b/include/sound/tas2781.h
@@ -120,8 +120,11 @@ enum audio_device {
TAS2570,
TAS2572,
TAS2781,
+ TAS5802,
+ TAS5815,
TAS5825,
TAS5827,
+ TAS5828,
TAS_OTHERS,
};
diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
index 1539b70881d1..ba880b5de7e8 100644
--- a/sound/soc/codecs/tas2781-i2c.c
+++ b/sound/soc/codecs/tas2781-i2c.c
@@ -108,8 +108,11 @@ static const struct i2c_device_id tasdevice_id[] = {
{ "tas2570", TAS2570 },
{ "tas2572", TAS2572 },
{ "tas2781", TAS2781 },
+ { "tas5802", TAS5802 },
+ { "tas5815", TAS5815 },
{ "tas5825", TAS5825 },
{ "tas5827", TAS5827 },
+ { "tas5828", TAS5828 },
{}
};
MODULE_DEVICE_TABLE(i2c, tasdevice_id);
@@ -124,8 +127,11 @@ static const struct of_device_id tasdevice_of_match[] = {
{ .compatible = "ti,tas2570" },
{ .compatible = "ti,tas2572" },
{ .compatible = "ti,tas2781" },
+ { .compatible = "ti,tas5802" },
+ { .compatible = "ti,tas5815" },
{ .compatible = "ti,tas5825" },
{ .compatible = "ti,tas5827" },
+ { .compatible = "ti,tas5828" },
{},
};
MODULE_DEVICE_TABLE(of, tasdevice_of_match);
@@ -1665,8 +1671,10 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
}
tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
- /* There is no calibration required for TAS5825/TAS5827. */
- if (tas_priv->chip_id < TAS5825) {
+ /* There is no calibration required for
+ * TAS5802/TAS5815/TAS5825/TAS5827/TAS5828.
+ */
+ if (tas_priv->chip_id < TAS5802) {
ret = tasdevice_create_cali_ctrls(tas_priv);
if (ret) {
dev_err(tas_priv->dev, "cali controls error\n");
@@ -1720,8 +1728,11 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
switch (tas_priv->chip_id) {
case TAS2563:
case TAS2781:
+ case TAS5802:
+ case TAS5815:
case TAS5825:
case TAS5827:
+ case TAS5828:
/* If DSP FW fail, DSP kcontrol won't be created. */
tasdevice_dsp_remove(tas_priv);
}
@@ -1882,8 +1893,11 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec)
p = (struct snd_kcontrol_new *)tas2781_snd_controls;
size = ARRAY_SIZE(tas2781_snd_controls);
break;
+ case TAS5802:
+ case TAS5815:
case TAS5825:
case TAS5827:
+ case TAS5828:
p = (struct snd_kcontrol_new *)tas5825_snd_controls;
size = ARRAY_SIZE(tas5825_snd_controls);
break;
@@ -2054,8 +2068,11 @@ static const struct acpi_device_id tasdevice_acpi_match[] = {
{ "TXNW2570", TAS2570 },
{ "TXNW2572", TAS2572 },
{ "TXNW2781", TAS2781 },
+ { "TXNW5802", TAS5802 },
+ { "TXNW5815", TAS5815 },
{ "TXNW5825", TAS5825 },
{ "TXNW5827", TAS5827 },
+ { "TXNW5828", TAS5828 },
{},
};
--
2.25.1
next reply other threads:[~2025-10-08 4:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-08 4:54 Baojun Xu [this message]
2025-10-08 4:54 ` [PATCH v5 2/2] ASoC: dt-bindings: ti,tas2781: Add TAS58XX Baojun Xu
2025-10-08 16:10 ` Rob Herring
2025-10-15 9:49 ` [PATCH v5 1/2] ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251008045500.44477-1-baojun.xu@ti.com \
--to=baojun.xu@ti.com \
--cc=13916275206@139.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=chinkaiting@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=henry.lo@ti.com \
--cc=jesse-ji@ti.com \
--cc=jim.shil@goertek.com \
--cc=k-yi@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=robinchen@ti.com \
--cc=shenghao-ding@ti.com \
--cc=tiwai@suse.de \
--cc=toastcheng@google.com \
--cc=will-wang@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).