[PATCH v5 4/5] PCI: mediatek: convert bool to single flags entry and bitmap

[Christian Marangi <ansuelsmth@gmail.com>]

To clean Mediatek SoC PCIe struct, convert all the bool to a bitmap and
use a single flags to reference all the values. This permits cleaner
addition of new flag without having to define a new bool in the struct.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/pci/controller/pcie-mediatek.c | 28 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 24cc30a2ab6c..1678461e56d3 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -142,24 +142,29 @@
 
 struct mtk_pcie_port;
 
+enum mtk_pcie_flags {
+	NEED_FIX_CLASS_ID = BIT(0), /* host's class ID needed to be fixed */
+	NEED_FIX_DEVICE_ID = BIT(1), /* host's device ID needed to be fixed */
+	NO_MSI = BIT(2), /* Bridge has no MSI support, and relies on an
+			  * external block
+			  */
+};
+
 /**
  * struct mtk_pcie_soc - differentiate between host generations
- * @need_fix_class_id: whether this host's class ID needed to be fixed or not
- * @need_fix_device_id: whether this host's device ID needed to be fixed or not
  * @no_msi: Bridge has no MSI support, and relies on an external block
  * @device_id: device ID which this host need to be fixed
  * @ops: pointer to configuration access functions
  * @startup: pointer to controller setting functions
  * @setup_irq: pointer to initialize IRQ functions
+ * @flags: pcie device flags.
  */
 struct mtk_pcie_soc {
-	bool need_fix_class_id;
-	bool need_fix_device_id;
-	bool no_msi;
 	unsigned int device_id;
 	struct pci_ops *ops;
 	int (*startup)(struct mtk_pcie_port *port);
 	int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
+	u32 flags;
 };
 
 /**
@@ -703,7 +708,7 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 	writel(val, port->base + PCIE_RST_CTRL);
 
 	/* Set up vendor ID and class code */
-	if (soc->need_fix_class_id) {
+	if (soc->flags & NEED_FIX_CLASS_ID) {
 		val = PCI_VENDOR_ID_MEDIATEK;
 		writew(val, port->base + PCIE_CONF_VEND_ID);
 
@@ -711,7 +716,7 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 		writew(val, port->base + PCIE_CONF_CLASS_ID);
 	}
 
-	if (soc->need_fix_device_id)
+	if (soc->flags & NEED_FIX_DEVICE_ID)
 		writew(soc->device_id, port->base + PCIE_CONF_DEVICE_ID);
 
 	/* 100ms timeout value should be enough for Gen1/2 training */
@@ -1099,7 +1104,7 @@ static int mtk_pcie_probe(struct platform_device *pdev)
 
 	host->ops = pcie->soc->ops;
 	host->sysdata = pcie;
-	host->msi_domain = pcie->soc->no_msi;
+	host->msi_domain = !!(pcie->soc->flags & NO_MSI);
 
 	err = pci_host_probe(host);
 	if (err)
@@ -1187,9 +1192,9 @@ static const struct dev_pm_ops mtk_pcie_pm_ops = {
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
-	.no_msi = true,
 	.ops = &mtk_pcie_ops,
 	.startup = mtk_pcie_startup_port,
+	.flags = NO_MSI,
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
@@ -1199,19 +1204,18 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
-	.need_fix_class_id = true,
 	.ops = &mtk_pcie_ops_v2,
 	.startup = mtk_pcie_startup_port_v2,
 	.setup_irq = mtk_pcie_setup_irq,
+	.flags = NEED_FIX_CLASS_ID,
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_mt7629 = {
-	.need_fix_class_id = true,
-	.need_fix_device_id = true,
 	.device_id = PCI_DEVICE_ID_MEDIATEK_7629,
 	.ops = &mtk_pcie_ops_v2,
 	.startup = mtk_pcie_startup_port_v2,
 	.setup_irq = mtk_pcie_setup_irq,
+	.flags = NEED_FIX_CLASS_ID | NEED_FIX_DEVICE_ID,
 };
 
 static const struct of_device_id mtk_pcie_ids[] = {
-- 
2.51.0