[PATCH v7 6/9] dt-bindings: arm: add an interrupt property for Coresight CTCU

[Jie Gan <jie.gan@oss.qualcomm.com>]

Add an interrupt property to CTCU device. The interrupt will be triggered
when the data size in the ETR buffer exceeds the threshold of the
BYTECNTRVAL register. Programming a threshold in the BYTECNTRVAL register
of CTCU device will enable the interrupt.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
---
 .../devicetree/bindings/arm/qcom,coresight-ctcu.yaml    | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
index c969c16c21ef..02797e5f3b58 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
@@ -39,6 +39,16 @@ properties:
     items:
       - const: apb
 
+  interrupts:
+    items:
+      - description: Byte cntr interrupt for etr0
+      - description: Byte cntr interrupt for etr1
+
+  interrupt-names:
+    items:
+      - const: etr0
+      - const: etr1
+
   label:
     description:
       Description of a coresight device.
@@ -60,6 +70,8 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     ctcu@1001000 {
         compatible = "qcom,sa8775p-ctcu";
         reg = <0x1001000 0x1000>;
@@ -67,6 +79,11 @@ examples:
         clocks = <&aoss_qmp>;
         clock-names = "apb";
 
+        interrupts = <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "etr0",
+                          "etr1";
+
         in-ports {
             #address-cells = <1>;
             #size-cells = <0>;

-- 
2.34.1