[PATCH v5 02/13] firmware: qcom_scm: Rename peripheral as pas_id

[Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>]

Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.

Lets rename peripheral to pas_id to reflect closer to its meaning.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
---
 drivers/firmware/qcom/qcom_scm.c       | 30 +++++++++++++++---------------
 include/linux/firmware/qcom/qcom_scm.h | 10 +++++-----
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index e777b7cb9b12..3379607eaf94 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -562,7 +562,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
  * qcom_scm_pas_init_image() - Initialize peripheral authentication service
  *			       state machine for a given peripheral, using the
  *			       metadata
- * @peripheral: peripheral id
+ * @pas_id:	peripheral authentication service id
  * @metadata:	pointer to memory containing ELF header, program header table
  *		and optional blob of data used for authenticating the metadata
  *		and the rest of the firmware
@@ -575,7 +575,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
  * track the metadata allocation, this needs to be released by invoking
  * qcom_scm_pas_metadata_release() by the caller.
  */
-int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
+int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
 			    struct qcom_scm_pas_metadata *ctx)
 {
 	dma_addr_t mdata_phys;
@@ -585,7 +585,7 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
 		.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -658,20 +658,20 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release);
 /**
  * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
  *			      for firmware loading
- * @peripheral:	peripheral id
+ * @pas_id:	peripheral authentication service id
  * @addr:	start address of memory area to prepare
  * @size:	size of the memory area to prepare
  *
  * Returns 0 on success.
  */
-int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
 		.arginfo = QCOM_SCM_ARGS(3),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.args[1] = addr,
 		.args[2] = size,
 		.owner = ARM_SMCCC_OWNER_SIP,
@@ -699,18 +699,18 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup);
 /**
  * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
  *				   and reset the remote processor
- * @peripheral:	peripheral id
+ * @pas_id:	peripheral authentication service id
  *
  * Return 0 on success.
  */
-int qcom_scm_pas_auth_and_reset(u32 peripheral)
+int qcom_scm_pas_auth_and_reset(u32 pas_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
 		.arginfo = QCOM_SCM_ARGS(1),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -735,18 +735,18 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset);
 
 /**
  * qcom_scm_pas_shutdown() - Shut down the remote processor
- * @peripheral: peripheral id
+ * @pas_id:	peripheral authentication service id
  *
  * Returns 0 on success.
  */
-int qcom_scm_pas_shutdown(u32 peripheral)
+int qcom_scm_pas_shutdown(u32 pas_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
 		.arginfo = QCOM_SCM_ARGS(1),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -772,18 +772,18 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown);
 /**
  * qcom_scm_pas_supported() - Check if the peripheral authentication service is
  *			      available for the given peripherial
- * @peripheral:	peripheral id
+ * @pas_id:	peripheral authentication service id
  *
  * Returns true if PAS is supported for this peripheral, otherwise false.
  */
-bool qcom_scm_pas_supported(u32 peripheral)
+bool qcom_scm_pas_supported(u32 pas_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
 		.arginfo = QCOM_SCM_ARGS(1),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index a55ca771286b..a13f703b16cd 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -72,13 +72,13 @@ struct qcom_scm_pas_metadata {
 	ssize_t size;
 };
 
-int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
+int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
 			    struct qcom_scm_pas_metadata *ctx);
 void qcom_scm_pas_metadata_release(struct qcom_scm_pas_metadata *ctx);
-int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size);
-int qcom_scm_pas_auth_and_reset(u32 peripheral);
-int qcom_scm_pas_shutdown(u32 peripheral);
-bool qcom_scm_pas_supported(u32 peripheral);
+int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size);
+int qcom_scm_pas_auth_and_reset(u32 pas_id);
+int qcom_scm_pas_shutdown(u32 pas_id);
+bool qcom_scm_pas_supported(u32 pas_id);
 
 int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);

-- 
2.50.1