[PATCH v5 07/13] firmware: qcom_scm: Add a prep version of auth_and_reset function

[Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>]

For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.

On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.

Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.

Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
---
 drivers/firmware/qcom/qcom_scm.c       | 48 ++++++++++++++++++++++++++++++++++
 include/linux/firmware/qcom/qcom_scm.h |  2 ++
 2 files changed, 50 insertions(+)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index b11a21797d46..a66e782fdb68 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -770,6 +770,54 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id)
 }
 EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset);
 
+/**
+ * qcom_scm_pas_prepare_and_auth_reset() - Prepare, authenticate, and reset the
+ *					   remote processor
+ *
+ * @ctx:	Context saved during call to qcom_scm_pas_context_init()
+ *
+ * This function performs the necessary steps to prepare a PAS subsystem,
+ * authenticate it using the provided metadata, and initiate a reset sequence.
+ *
+ * It should be used when Linux is in control setting up the IOMMU hardware
+ * for remote subsystem during secure firmware loading processes. The preparation
+ * step sets up a shmbridge over the firmware memory before TrustZone accesses the
+ * firmware memory region for authentication. The authentication step verifies
+ * the integrity and authenticity of the firmware or configuration using secure
+ * metadata. Finally, the reset step ensures the subsystem starts in a clean and
+ * sane state.
+ *
+ * Return: 0 on success, negative errno on failure.
+ */
+int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx)
+{
+	u64 handle;
+	int ret;
+
+	if (!ctx->has_iommu)
+		return qcom_scm_pas_auth_and_reset(ctx->pas_id);
+
+	/*
+	 * When Linux running @ EL1, Gunyah hypervisor running @ EL2 traps the
+	 * auth_and_reset call and create an shmbridge on the remote subsystem
+	 * memory region and then invokes a call to TrustZone to authenticate.
+	 * When Linux runs @ EL2 Linux must create the shmbridge itself and then
+	 * subsequently call TrustZone for authenticate and reset.
+	 */
+	ret = qcom_tzmem_shm_bridge_create(ctx->mem_phys, ctx->mem_size, &handle);
+	if (ret) {
+		dev_err(__scm->dev, "Failed to create shmbridge for PAS ID (%u): %d\n",
+			ctx->pas_id, ret);
+		return ret;
+	}
+
+	ret = qcom_scm_pas_auth_and_reset(ctx->pas_id);
+	qcom_tzmem_shm_bridge_delete(handle);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_scm_pas_prepare_and_auth_reset);
+
 /**
  * qcom_scm_pas_shutdown() - Shut down the remote processor
  * @pas_id:	peripheral authentication service id
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index 7c58d26ede24..e1de3cf73451 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -78,6 +78,7 @@ struct qcom_scm_pas_context {
 	phys_addr_t mem_phys;
 	size_t mem_size;
 	struct qcom_scm_pas_metadata *metadata;
+	bool has_iommu;
 };
 
 void *qcom_scm_pas_context_init(struct device *dev, u32 pas_id, phys_addr_t mem_phys,
@@ -89,6 +90,7 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size);
 int qcom_scm_pas_auth_and_reset(u32 pas_id);
 int qcom_scm_pas_shutdown(u32 pas_id);
 bool qcom_scm_pas_supported(u32 pas_id);
+int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx);
 
 int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);

-- 
2.50.1