From: Frank Li <Frank.Li@nxp.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Christoph Niedermaier <cniedermaier@dh-electronics.com>,
Marek Vasut <marex@denx.de>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@dh-electronics.com,
Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 7/8] ARM: dts: remove undocumented clock-names for ov5642
Date: Tue, 14 Oct 2025 15:38:24 -0400 [thread overview]
Message-ID: <20251014-imx6_dts_clean_2-v1-7-508b36e5a3fd@nxp.com> (raw)
In-Reply-To: <20251014-imx6_dts_clean_2-v1-0-508b36e5a3fd@nxp.com>
Remove undocumented clock-names for ov5642 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dtb: camera@3c (ovti,ov5642): 'clock-names' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi | 1 -
arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
index b2d9e528fcfec55d5467a11ae4308fc92c1d1d50..3b7d01065e87b2587a87f97438eea205be3222f8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -363,7 +363,6 @@ ov5642: camera@42 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5642>;
clocks = <&clks IMX6QDL_CLK_CKO2>;
- clock-names = "xclk";
reg = <0x42>;
reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index d1adbb11c51ae078094dbe475b85038c89d243ac..ba29720e3f7205675b46a14ea4ce3f8957790911 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -287,7 +287,6 @@ ov5642: camera@3c {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5642>;
clocks = <&clks IMX6QDL_CLK_CKO>;
- clock-names = "xclk";
reg = <0x3c>;
DOVDD-supply = <&vgen4_reg>; /* 1.8v */
AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3
--
2.34.1
next prev parent reply other threads:[~2025-10-14 19:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-14 19:38 [PATCH 0/8] ARM: dtb: imx6 DTB WARNING cleanup 2 Frank Li
2025-10-14 19:38 ` [PATCH 1/8] ARM: dts: imx: add power-supply for lcd panel Frank Li
2025-10-14 20:46 ` Marek Vasut
2025-10-14 22:01 ` Frank Li
2025-10-14 23:29 ` Marek Vasut
2025-10-14 19:38 ` [PATCH 2/8] ARM: dts: imx: remove redundant linux,phandle Frank Li
2025-10-14 19:38 ` [PATCH 3/8] ARM: dts: imx6qdl-skov-cpu fix typo interrupt Frank Li
2025-10-14 19:38 ` [PATCH 4/8] ARM: dts: imx6q-cm-fx6.dts: add supplies for wm8731 Frank Li
2025-10-14 19:38 ` [PATCH 5/8] ARM: dts: Add bus type for parallel ov5640 Frank Li
2025-10-14 19:38 ` [PATCH 6/8] ARM: dts: add device_type for memory node Frank Li
2025-10-14 19:38 ` Frank Li [this message]
2025-10-14 19:38 ` [PATCH 8/8] ARM: dts: imx7ulp: remove bias-pull-up Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251014-imx6_dts_clean_2-v1-7-508b36e5a3fd@nxp.com \
--to=frank.li@nxp.com \
--cc=cniedermaier@dh-electronics.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@dh-electronics.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).