From: Liangbin Lian <jjm2473@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
heiko@sntech.de, quentin.schulz@cherry.de,
kever.yang@rock-chips.com, naoki@radxa.com,
honyuenkwun@gmail.com, inindev@gmail.com,
ivan8215145640@gmail.com, neil.armstrong@linaro.org,
mani@kernel.org, dsimic@manjaro.org, pbrobinson@gmail.com,
alchark@gmail.com, didi.debian@cknow.org, jjm2473@gmail.com,
jbx6244@gmail.com, andrew@lunn.ch
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 0/3] arm64: dts: rockchip: introduce LinkEase EasePi R1
Date: Tue, 14 Oct 2025 13:12:23 +0800 [thread overview]
Message-ID: <20251014051226.64255-1-jjm2473@gmail.com> (raw)
LinkEase EasePi R1 [1] is a high-performance mini router.
Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)
[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
---
Changes in v2:
- Change deprecated "rockchip,system-power-controller" to "system-power-controller"
- Link to v1: https://lore.kernel.org/r/20250925055906.83375-1-jjm2473@gmail.com/
Changes in v3:
- Fix typo ('status = "disable"' -> 'status = "disabled"') found by kernel test robot https://lore.kernel.org/all/202509261328.Grjhp029-lkp@intel.com/
- Link to v2: https://lore.kernel.org/r/20250925092037.13582-1-jjm2473@gmail.com/
Changes in v4:
- Fix missing "Acked-by" message in patch 1/3 and 2/3
- Link to v3: https://lore.kernel.org/r/20250929065714.27741-1-jjm2473@gmail.com/
Changes in v5:
- Change gmac phy-mode to 'rgmii-id' and remove {tx|rx}_delay as suggested by Andrew Lunn <andrew@lunn.ch>
- Fix comments ('not mounted' -> 'not populated') for unpopulated devices as suggested by Andrew Lunn <andrew@lunn.ch>
- Link to v4: https://lore.kernel.org/r/20250930055017.67610-1-jjm2473@gmail.com/
Changes in v6:
- Fix missing 'vpcie3v3-supply' property for PCIe nodes found by Chukun Pan <amadeus@jmu.edu.cn>
- Nodes and properties are sorted alphabetically as requested by Chukun Pan <amadeus@jmu.edu.cn>
- Remove unpopulated devices (sdmmc0, sdmmc2) as suggested by Chukun Pan <amadeus@jmu.edu.cn> and Andrew Lunn <andrew@lunn.ch>
- Remove 'combphy0' node which is unused
- Remove 'clock_in_out' property in gmac nodes as suggested by Russell King (Oracle) <linux@armlinux.org.uk>
- Remove deprecated 'label' property in gpio-leds node as requested by Chukun Pan <amadeus@jmu.edu.cn>
- Link to v5: https://lore.kernel.org/r/20251009084416.45542-1-jjm2473@gmail.com/
---
Liangbin Lian (3):
dt-bindings: vendor-prefixes: Document LinkEase
dt-bindings: arm: rockchip: Add LinkEase EasePi R1
arm64: dts: rockchip: add LinkEase EasePi R1
.../devicetree/bindings/arm/rockchip.yaml | 5 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3568-easepi-r1.dts | 624 ++++++++++++++++++
4 files changed, 632 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts
base-commit: 30d4efb2f5a515a60fe6b0ca85362cbebea21e2f
--
2.51.0
next reply other threads:[~2025-10-14 5:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-14 5:12 Liangbin Lian [this message]
2025-10-14 5:12 ` [PATCH v6 1/3] dt-bindings: vendor-prefixes: Document LinkEase Liangbin Lian
2025-10-14 5:12 ` [PATCH v6 2/3] dt-bindings: arm: rockchip: Add LinkEase EasePi R1 Liangbin Lian
2025-10-14 5:12 ` [PATCH v6 3/3] arm64: dts: rockchip: add " Liangbin Lian
2025-10-20 15:24 ` [PATCH v6 0/3] arm64: dts: rockchip: introduce " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251014051226.64255-1-jjm2473@gmail.com \
--to=jjm2473@gmail.com \
--cc=alchark@gmail.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=didi.debian@cknow.org \
--cc=dsimic@manjaro.org \
--cc=heiko@sntech.de \
--cc=honyuenkwun@gmail.com \
--cc=inindev@gmail.com \
--cc=ivan8215145640@gmail.com \
--cc=jbx6244@gmail.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mani@kernel.org \
--cc=naoki@radxa.com \
--cc=neil.armstrong@linaro.org \
--cc=pbrobinson@gmail.com \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).