* [PATCH v3 0/2] arm64: dts: qcom: Add support for QCS615 Talos EVK platform
@ 2025-10-14 12:00 Sudarshan Shetty
0 siblings, 0 replies; 2+ messages in thread
From: Sudarshan Shetty @ 2025-10-14 12:00 UTC (permalink / raw)
To: andersson, Dmitry Baryshkov, Krzysztof Kozlowski, Rob Herring,
Conor Dooley
Cc: konradybcio, krzk+dt, linux-arm-msm, devicetree, linux-kernel,
tessolveupstream
Hi all,
This patch series adds initial device tree and binding support for the
QCS615-based Talos EVK SMARC platform.
The Talos EVK is based on the QCS615 SoC and follows the SMARC
standard, consisting of a SoM and a carrier board. The SoM integrates
the SoC, PMIC, and GPIO interfaces, while the carrier board provides
peripherals such as UART, USB, and CAN for evaluation and development.
---
### Changes in v3:
- Addressed comments from Dmitry regarding USB1 `dr_mode` and added a DTS comment.
- No functional change in bindings file.
### Changes in v2:
- Renamed compatible to "qcom,talos-evk" (suggested by Dmitry/Bjorn)
- Merged enum entry with existing `qcs615-ride` block (suggested by Krzysztof)
- Fixed subject and commit message to use imperative mood.
---
### Patch summary:
1. **dt-bindings: arm: qcom: Add Talos EVK SMARC platform**
2. **arm64: dts: qcom: Add support for QCS615 Talos EVK board**
---
Best regards,
Sudarshan Shetty
Tessolve
---
**[PATCH v3 1/2]** — `dt-bindings: arm: qcom: Add Talos EVK SMARC platform`
**[PATCH v3 2/2]** — `arm64: dts: qcom: Add support for QCS615 Talos EVK board`
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH v3 0/2] arm64: dts: qcom: Add support for QCS615 Talos EVK platform
@ 2025-10-14 12:02 Sudarshan Shetty
0 siblings, 0 replies; 2+ messages in thread
From: Sudarshan Shetty @ 2025-10-14 12:02 UTC (permalink / raw)
To: andersson, Dmitry Baryshkov, Krzysztof Kozlowski, Rob Herring,
Conor Dooley
Cc: konradybcio, krzk+dt, linux-arm-msm, devicetree, linux-kernel,
tessolveupstream
Hi all,
This patch series adds initial device tree and binding support for the
QCS615-based Talos EVK SMARC platform.
The Talos EVK is based on the QCS615 SoC and follows the SMARC
standard, consisting of a SoM and a carrier board. The SoM integrates
the SoC, PMIC, and GPIO interfaces, while the carrier board provides
peripherals such as UART, USB, and CAN for evaluation and development.
---
### Changes in v3:
- Addressed comments from Dmitry regarding USB1 `dr_mode` and added a DTS comment.
- No functional change in bindings file.
### Changes in v2:
- Renamed compatible to "qcom,talos-evk" (suggested by Dmitry/Bjorn)
- Merged enum entry with existing `qcs615-ride` block (suggested by Krzysztof)
- Fixed subject and commit message to use imperative mood.
---
### Patch summary:
1. **dt-bindings: arm: qcom: Add Talos EVK SMARC platform**
2. **arm64: dts: qcom: Add support for QCS615 Talos EVK board**
---
Best regards,
Sudarshan Shetty
Tessolve
---
**[PATCH v3 1/2]** — `dt-bindings: arm: qcom: Add Talos EVK SMARC platform`
**[PATCH v3 2/2]** — `arm64: dts: qcom: Add support for QCS615 Talos EVK board`
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-10-14 12:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-10-14 12:00 [PATCH v3 0/2] arm64: dts: qcom: Add support for QCS615 Talos EVK platform Sudarshan Shetty
-- strict thread matches above, loose matches on Subject: below --
2025-10-14 12:02 Sudarshan Shetty
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).