devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
	 linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
	 devicetree@vger.kernel.org
Subject: [PATCH net-next 11/12] net: airoha: Refactor src port configuration in airhoha_set_gdm2_loopback
Date: Wed, 15 Oct 2025 09:15:11 +0200	[thread overview]
Message-ID: <20251015-an7583-eth-support-v1-11-064855f05923@kernel.org> (raw)
In-Reply-To: <20251015-an7583-eth-support-v1-0-064855f05923@kernel.org>

AN7583 chipset relies on different definitions for source-port
identifier used for hw offloading. In order to support hw offloading
in AN7583 controller, refactor src port configuration in
airhoha_set_gdm2_loopback routine and introduce get_src_port_id
callback.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/airoha/airoha_eth.c  | 75 +++++++++++++++++++++----------
 drivers/net/ethernet/airoha/airoha_eth.h  | 11 +++--
 drivers/net/ethernet/airoha/airoha_regs.h |  5 +--
 3 files changed, 60 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index 5f6b5ab52e0265f7bb56b008ca653d64e04ff2d2..76c82750b3ae89a9fa81c64d3b7c3578b369480c 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -1682,11 +1682,14 @@ static int airoha_dev_set_macaddr(struct net_device *dev, void *p)
 	return 0;
 }
 
-static void airhoha_set_gdm2_loopback(struct airoha_gdm_port *port)
+static int airhoha_set_gdm2_loopback(struct airoha_gdm_port *port)
 {
 	u32 pse_port = port->id == 3 ? FE_PSE_PORT_GDM3 : FE_PSE_PORT_GDM4;
 	struct airoha_eth *eth = port->qdma->eth;
 	u32 chan = port->id == 3 ? 4 : 0;
+	/* XXX: handle XSI_USB_PORT and XSI_PCE1_PORT */
+	u32 nbq = port->id == 3 ? 4 : 0;
+	int src_port;
 
 	/* Forward the traffic to the proper GDM port */
 	airoha_set_gdm_port_fwd_cfg(eth, REG_GDM_FWD_CFG(2), pse_port);
@@ -1709,29 +1712,23 @@ static void airhoha_set_gdm2_loopback(struct airoha_gdm_port *port)
 	airoha_fe_clear(eth, REG_FE_VIP_PORT_EN, BIT(2));
 	airoha_fe_clear(eth, REG_FE_IFC_PORT_EN, BIT(2));
 
-	if (port->id == 3) {
-		/* FIXME: handle XSI_PCE1_PORT */
-		airoha_fe_rmw(eth, REG_FE_WAN_PORT,
-			      WAN1_EN_MASK | WAN1_MASK | WAN0_MASK,
-			      FIELD_PREP(WAN0_MASK, HSGMII_LAN_PCIE0_SRCPORT));
-		airoha_fe_rmw(eth,
-			      REG_SP_DFT_CPORT(HSGMII_LAN_PCIE0_SRCPORT >> 3),
-			      SP_CPORT_PCIE0_MASK,
-			      FIELD_PREP(SP_CPORT_PCIE0_MASK,
-					 FE_PSE_PORT_CDM2));
-	} else {
-		/* FIXME: handle XSI_USB_PORT */
+	src_port = eth->soc->ops.get_src_port_id(port, nbq);
+	if (src_port < 0)
+		return src_port;
+
+	airoha_fe_rmw(eth, REG_FE_WAN_PORT,
+		      WAN1_EN_MASK | WAN1_MASK | WAN0_MASK,
+		      FIELD_PREP(WAN0_MASK, src_port));
+	airoha_fe_rmw(eth, REG_SP_DFT_CPORT(src_port >> 3),
+		      SP_CPORT_MASK(src_port & 0x7),
+		      FE_PSE_PORT_CDM2 << __ffs(SP_CPORT_MASK(src_port & 0x7)));
+
+	if (port->id != 3)
 		airoha_fe_rmw(eth, REG_SRC_PORT_FC_MAP6,
 			      FC_ID_OF_SRC_PORT24_MASK,
 			      FIELD_PREP(FC_ID_OF_SRC_PORT24_MASK, 2));
-		airoha_fe_rmw(eth, REG_FE_WAN_PORT,
-			      WAN1_EN_MASK | WAN1_MASK | WAN0_MASK,
-			      FIELD_PREP(WAN0_MASK, HSGMII_LAN_ETH_SRCPORT));
-		airoha_fe_rmw(eth,
-			      REG_SP_DFT_CPORT(HSGMII_LAN_ETH_SRCPORT >> 3),
-			      SP_CPORT_ETH_MASK,
-			      FIELD_PREP(SP_CPORT_ETH_MASK, FE_PSE_PORT_CDM2));
-	}
+
+	return 0;
 }
 
 static int airoha_dev_init(struct net_device *dev)
@@ -1748,8 +1745,13 @@ static int airoha_dev_init(struct net_device *dev)
 	case 3:
 	case 4:
 		/* If GDM2 is active we can't enable loopback */
-		if (!eth->ports[1])
-			airhoha_set_gdm2_loopback(port);
+		if (!eth->ports[1]) {
+			int err;
+
+			err = airhoha_set_gdm2_loopback(port);
+			if (err)
+				return err;
+		}
 		fallthrough;
 	case 2:
 		if (airoha_ppe_is_enabled(eth, 1)) {
@@ -3055,11 +3057,38 @@ static const char * const en7581_xsi_rsts_names[] = {
 	"xfp-mac",
 };
 
+static int airoha_en7581_get_src_port_id(struct airoha_gdm_port *port, int nbq)
+{
+	switch (port->id) {
+	case 3:
+		/* 7581 SoC supports PCIe serdes on GDM3 port */
+		if (nbq == 4)
+			return HSGMII_LAN_7581_PCIE0_SRCPORT;
+		if (nbq == 5)
+			return HSGMII_LAN_7581_PCIE1_SRCPORT;
+		break;
+	case 4:
+		/* 7581 SoC supports eth and usb serdes on GDM4 port */
+		if (!nbq)
+			return HSGMII_LAN_7581_ETH_SRCPORT;
+		if (nbq == 1)
+			return HSGMII_LAN_7581_USB_SRCPORT;
+		break;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
 static const struct airoha_eth_soc_data en7581_soc_data = {
 	.version = 0x7581,
 	.xsi_rsts_names = en7581_xsi_rsts_names,
 	.num_xsi_rsts = ARRAY_SIZE(en7581_xsi_rsts_names),
 	.num_ppe = 2,
+	.ops = {
+		.get_src_port_id = airoha_en7581_get_src_port_id,
+	},
 };
 
 static const struct of_device_id of_airoha_match[] = {
diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
index df168d798699d50c70fa5f87764de24e85994dfd..1b83b935520cd736a1eb376eff937340ed99a49a 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -67,10 +67,10 @@ enum {
 };
 
 enum {
-	HSGMII_LAN_PCIE0_SRCPORT = 0x16,
-	HSGMII_LAN_PCIE1_SRCPORT,
-	HSGMII_LAN_ETH_SRCPORT,
-	HSGMII_LAN_USB_SRCPORT,
+	HSGMII_LAN_7581_PCIE0_SRCPORT	= 0x16,
+	HSGMII_LAN_7581_PCIE1_SRCPORT,
+	HSGMII_LAN_7581_ETH_SRCPORT,
+	HSGMII_LAN_7581_USB_SRCPORT,
 };
 
 enum {
@@ -555,6 +555,9 @@ struct airoha_eth_soc_data {
 	const char * const *xsi_rsts_names;
 	int num_xsi_rsts;
 	int num_ppe;
+	struct {
+		int (*get_src_port_id)(struct airoha_gdm_port *port, int nbq);
+	} ops;
 };
 
 struct airoha_eth {
diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
index 69c5a143db8c079be0a6ecf41081cd3f5048c090..cc230f61c0049a663c011556280af736284d018d 100644
--- a/drivers/net/ethernet/airoha/airoha_regs.h
+++ b/drivers/net/ethernet/airoha/airoha_regs.h
@@ -383,10 +383,7 @@
 #define REG_MC_VLAN_DATA		0x2108
 
 #define REG_SP_DFT_CPORT(_n)		(0x20e0 + ((_n) << 2))
-#define SP_CPORT_PCIE1_MASK		GENMASK(31, 28)
-#define SP_CPORT_PCIE0_MASK		GENMASK(27, 24)
-#define SP_CPORT_USB_MASK		GENMASK(7, 4)
-#define SP_CPORT_ETH_MASK		GENMASK(7, 4)
+#define SP_CPORT_MASK(_n)		GENMASK(3 + ((_n) << 2), ((_n) << 2))
 
 #define REG_SRC_PORT_FC_MAP6		0x2298
 #define FC_ID_OF_SRC_PORT27_MASK	GENMASK(28, 24)

-- 
2.51.0


  parent reply	other threads:[~2025-10-15  7:15 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-15  7:15 [PATCH net-next 00/12] net: airoha: Add AN7583 ethernet controller support Lorenzo Bianconi
2025-10-15  7:15 ` [PATCH net-next 01/12] dt-bindings: net: airoha: Add AN7583 support Lorenzo Bianconi
2025-10-15  7:15 ` [PATCH net-next 02/12] net: airoha: ppe: Dynamically allocate foe_check_time array in airoha_ppe struct Lorenzo Bianconi
2025-10-15 16:06   ` Simon Horman
2025-10-15  7:15 ` [PATCH net-next 03/12] net: airoha: Add airoha_ppe_get_num_stats_entries() and airoha_ppe_get_num_total_stats_entries() Lorenzo Bianconi
2025-10-15 12:52   ` Simon Horman
2025-10-16  8:10     ` Lorenzo Bianconi
2025-10-15  7:15 ` [PATCH net-next 04/12] net: airoha: Add airoha_eth_soc_data struct Lorenzo Bianconi
2025-10-15 16:06   ` Simon Horman
2025-10-15  7:15 ` [PATCH net-next 05/12] net: airoha: Generalize airoha_ppe2_is_enabled routine Lorenzo Bianconi
2025-10-15 16:07   ` Simon Horman
2025-10-15  7:15 ` [PATCH net-next 06/12] net: airoha: ppe: Move PPE memory info in airoha_eth_soc_data struct Lorenzo Bianconi
2025-10-15 16:07   ` Simon Horman
2025-10-15  7:15 ` [PATCH net-next 07/12] net: airoha: ppe: Remove airoha_ppe_is_enabled() where not necessary Lorenzo Bianconi
2025-10-15 16:07   ` Simon Horman
2025-10-15  7:15 ` [PATCH net-next 08/12] net: airoha: ppe: Configure SRAM PPE entries via the cpu Lorenzo Bianconi
2025-10-15 15:47   ` Simon Horman
2025-10-16  8:13     ` Lorenzo Bianconi
2025-10-15  7:15 ` [PATCH net-next 09/12] net: airoha: ppe: Flush PPE SRAM table during PPE setup Lorenzo Bianconi
2025-10-15 16:08   ` Simon Horman
2025-10-15  7:15 ` [PATCH net-next 10/12] net: airoha: Select default ppe cpu port in airoha_dev_init() Lorenzo Bianconi
2025-10-15 15:54   ` Simon Horman
2025-10-16  8:51     ` Lorenzo Bianconi
2025-10-15  7:15 ` Lorenzo Bianconi [this message]
2025-10-15 16:05   ` [PATCH net-next 11/12] net: airoha: Refactor src port configuration in airhoha_set_gdm2_loopback Simon Horman
2025-10-16  8:36     ` Lorenzo Bianconi
2025-10-15  7:15 ` [PATCH net-next 12/12] net: airoha: Add AN7583 SoC support Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251015-an7583-eth-support-v1-11-064855f05923@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).