[PATCH v4 22/29] misc: lan966x_pci: Fix dtso nodes ordering

[Herve Codina <herve.codina@bootlin.com>]

Nodes available in the dtso are not ordered by their unit address.

Fix that re-ordering them according to their unit address.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/misc/lan966x_pci.dtso | 99 +++++++++++++++++------------------
 1 file changed, 49 insertions(+), 50 deletions(-)

diff --git a/drivers/misc/lan966x_pci.dtso b/drivers/misc/lan966x_pci.dtso
index 47d61dc963c7..88f3daabfc89 100644
--- a/drivers/misc/lan966x_pci.dtso
+++ b/drivers/misc/lan966x_pci.dtso
@@ -59,6 +59,50 @@ pci-ep-bus@0 {
 				ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
 				          0xe0000000 0x01 0x00 0x00 0x1000000>;
 
+				switch: switch@e0000000 {
+					compatible = "microchip,lan966x-switch";
+					reg = <0xe0000000 0x0100000>,
+					      <0xe2000000 0x0800000>;
+					reg-names = "cpu", "gcb";
+
+					interrupt-parent = <&oic>;
+					interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+						     <9 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "xtr", "ana";
+
+					resets = <&reset 0>;
+					reset-names = "switch";
+
+					pinctrl-names = "default";
+					pinctrl-0 = <&tod_pins>;
+
+					ethernet-ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port0: port@0 {
+							phy-handle = <&lan966x_phy0>;
+
+							reg = <0>;
+							phy-mode = "gmii";
+							phys = <&serdes 0 CU(0)>;
+						};
+
+						port1: port@1 {
+							phy-handle = <&lan966x_phy1>;
+
+							reg = <1>;
+							phy-mode = "gmii";
+							phys = <&serdes 1 CU(1)>;
+						};
+					};
+				};
+
+				cpu_ctrl: syscon@e00c0000 {
+					compatible = "microchip,lan966x-cpu-syscon", "syscon";
+					reg = <0xe00c0000 0xa8>;
+				};
+
 				oic: oic@e00c0120 {
 					compatible = "microchip,lan966x-oic";
 					#interrupt-cells = <2>;
@@ -67,11 +111,6 @@ oic: oic@e00c0120 {
 					reg = <0xe00c0120 0x190>;
 				};
 
-				cpu_ctrl: syscon@e00c0000 {
-					compatible = "microchip,lan966x-cpu-syscon", "syscon";
-					reg = <0xe00c0000 0xa8>;
-				};
-
 				reset: reset@e200400c {
 					compatible = "microchip,lan966x-switch-reset";
 					reg = <0xe200400c 0x4>, <0xe00c0000 0xa8>;
@@ -104,14 +143,6 @@ fc0_a_pins: fcb4-i2c-pins {
 						pins = "GPIO_9", "GPIO_10";
 						function = "fc0_a";
 					};
-
-				};
-
-				serdes: serdes@e202c000 {
-					compatible = "microchip,lan966x-serdes";
-					reg = <0xe202c000 0x9c>,
-					      <0xe2004010 0x4>;
-					#phy-cells = <2>;
 				};
 
 				mdio1: mdio@e200413c {
@@ -133,43 +164,11 @@ lan966x_phy1: ethernet-lan966x_phy@2 {
 					};
 				};
 
-				switch: switch@e0000000 {
-					compatible = "microchip,lan966x-switch";
-					reg = <0xe0000000 0x0100000>,
-					      <0xe2000000 0x0800000>;
-					reg-names = "cpu", "gcb";
-
-					interrupt-parent = <&oic>;
-					interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
-						     <9 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "xtr", "ana";
-
-					resets = <&reset 0>;
-					reset-names = "switch";
-
-					pinctrl-names = "default";
-					pinctrl-0 = <&tod_pins>;
-
-					ethernet-ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port0: port@0 {
-							phy-handle = <&lan966x_phy0>;
-
-							reg = <0>;
-							phy-mode = "gmii";
-							phys = <&serdes 0 CU(0)>;
-						};
-
-						port1: port@1 {
-							phy-handle = <&lan966x_phy1>;
-
-							reg = <1>;
-							phy-mode = "gmii";
-							phys = <&serdes 1 CU(1)>;
-						};
-					};
+				serdes: serdes@e202c000 {
+					compatible = "microchip,lan966x-serdes";
+					reg = <0xe202c000 0x9c>,
+					      <0xe2004010 0x4>;
+					#phy-cells = <2>;
 				};
 			};
 		};
-- 
2.51.0