[PATCH v7 0/4] phy: qcom: Introduce USB support for SM8750

[PATCH v7 0/4] phy: qcom: Introduce USB support for SM8750

[Krishna Kurapati]

Add support for the PHYs and controllers used for USB on SM8750 SoCs.

Version-6 of this series has all the binding/driver/dt patches acked.
But only the phy changes have been merged. So this version is an effort to
get the Acked patches rebased and merged.

The usb patch has been split and sent out separately.

Also, although the phy changes are merged, kept the cover letter subject
unchanged. Hoping that is not an issue.

---
Changes in v7:
- Rebased on top of linux next
- Split usb patch and sent out separately.
- Link to v6: https://lore.kernel.org/all/20250527-sm8750_usb_master-v6-0-d58de3b41d34@oss.qualcomm.com/

Changes in v6:
- Change readl_relaxed/writel_relaxed calls to just readl/writel in the readback function
- Updated languange in the defconfig commit to specify SM8750 as a Qualcomm SoC
- Link to v5: https://lore.kernel.org/r/20250421-sm8750_usb_master-v5-0-25c79ed01d02@oss.qualcomm.com

Changes in v5:
- Removed refclk_src from the QMP PHY driver as that is no longer used.
- The decision to move the TCSR clkref property from controller --> phy
node was made in v4, and the refclk_src was a lingering change that was
meant to be removed.  CXO is the parent clock for TCSR clkref, so CXO
clk will be voted for as well.
- Relocate the SM8750 compatible within the qcom,dwc3 bindings.  This is
to take into account the change in clock list.
- Link to v4: https://lore.kernel.org/r/20250409-sm8750_usb_master-v4-0-6ec621c98be6@oss.qualcomm.com

Changes in v4:
- Made some fixups to the M31 eUSB2 driver
- Moved TCSR refclk_en to the QMP PHY DT node
- Link to v3: https://lore.kernel.org/r/20250324-sm8750_usb_master-v3-0-13e096dc88fd@quicinc.com

Changes in v3:
- Split platform DTs into separate commits.
- Fixed up M31 eUSB2 PHY driver with feedback received.
- Reordered DT properties based on feedback.
- Rewrote commit message for enabling EUSB driver.
- Link to v2: https://lore.kernel.org/r/20250304-sm8750_usb_master-v2-0-a698a2e68e06@quicinc.com

Changes in v2:
- Added new QMP PHY register definitions for v8 based QMP phys.
- Made changes to clean up some code in the M31 eUSB2 PHY driver based
on feedback received.
- Added bulk regulator operations in M31 eUSB2 PHY, to ensure that
both the vdd and vdda12 regulators are properly voted for.
- Removed external references to other dt bindings in M31 example for
the DT bindings change.
- Split DT patches between SoC and plaform changes, as well as the
PHY subsystem Kconfig changes when introducing the M31 eUSB2 PHY.
- Added orientation switch and port definitions in the DT changes.EDITME: describe what is new in this series revision.
- Link to v1: https://lore.kernel.org/r/20250113-sm8750_usb_master-v1-0-09afe1dc2524@quicinc.com

Melody Olvera (1):
  arm64: defconfig: Add M31 eUSB2 PHY config

Wesley Cheng (3):
  arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
  arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
  arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform

 arch/arm64/boot/dts/qcom/sm8750-mtp.dts |  24 ++++
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts |  24 ++++
 arch/arm64/boot/dts/qcom/sm8750.dtsi    | 164 ++++++++++++++++++++++++
 arch/arm64/configs/defconfig            |   1 +
 4 files changed, 213 insertions(+)

-- 
2.34.1

[PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Krishna Kurapati]

From: Wesley Cheng <quic_wcheng@quicinc.com>

Add the base USB devicetree definitions for SM8750 platforms.  The overall
chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
(rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
transition to using the M31 eUSB2 PHY compared to previous SoCs.

Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 164 +++++++++++++++++++++++++++
 1 file changed, 164 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index a82d9867c7cb..450fe5b7f03e 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,gpr.h>
@@ -2581,6 +2582,169 @@ data-pins {
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8750-m31-eusb2-phy";
+			reg = <0x0 0x88e3000 0x0 0x29c>;
+
+			clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8750-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&tcsrcc TCSR_USB3_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xe000>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0x0>;
+
+				phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8750-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>;
-- 
2.34.1

[PATCH v7 2/4] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Krishna Kurapati]

From: Wesley Cheng <quic_wcheng@quicinc.com>

Enable USB support on SM8750 MTP variants.  The current definition will
start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 3bbb53b7c71f..815651f65214 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -1121,6 +1121,30 @@ &uart7 {
 	status = "okay";
 };
 
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
+
 /* Pinctrl */
 &lpass_tlmm {
 	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
-- 
2.34.1

[PATCH v7 3/4] arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform

[Krishna Kurapati]

From: Wesley Cheng <quic_wcheng@quicinc.com>

Enable USB support on SM8750 QRD variant.  The current definition
will start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
index 13c7b9664c89..1949b28c90d0 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -1037,6 +1037,30 @@ &uart7 {
 	status = "okay";
 };
 
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
+
 &ufs_mem_phy {
 	vdda-phy-supply = <&vreg_l1j_0p91>;
 	vdda-pll-supply = <&vreg_l3g_1p2>;
-- 
2.34.1

[PATCH v7 4/4] arm64: defconfig: Add M31 eUSB2 PHY config

[Krishna Kurapati]

From: Melody Olvera <melody.olvera@oss.qualcomm.com>

The Qualcomm SM8750 SoCs use an eUSB2 PHY driver different from the
already existing M31 USB driver because it requires a connection
to an eUSB2 repeater. Thus, for USB to probe and work properly on
the Qualcomm SM8750 SoCs, enable the additional driver.

Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e3a2d37bd104..24b1c943a7e1 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1641,6 +1641,7 @@ CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
 CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_M31_USB=m
+CONFIG_PHY_QCOM_M31_EUSB=m
 CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
-- 
2.34.1

Re: [PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Konrad Dybcio]

On 10/15/25 12:52 PM, Krishna Kurapati wrote:
> From: Wesley Cheng <quic_wcheng@quicinc.com>
> 
> Add the base USB devicetree definitions for SM8750 platforms.  The overall
> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
> transition to using the M31 eUSB2 PHY compared to previous SoCs.
> 
> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---

[...]

> +		usb_1: usb@a6f8800 {
> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
> +			reg = <0x0 0x0a6f8800 0x0 0x400>;

Please resend this using the flattened model

Konrad

Re: [PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Krishna Kurapati PSSNV]

On 10/16/2025 12:59 PM, Konrad Dybcio wrote:
> On 10/15/25 12:52 PM, Krishna Kurapati wrote:
>> From: Wesley Cheng <quic_wcheng@quicinc.com>
>>
>> Add the base USB devicetree definitions for SM8750 platforms.  The overall
>> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
>> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
>> transition to using the M31 eUSB2 PHY compared to previous SoCs.
>>
>> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
>> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
>> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
>> ---
> 
> [...]
> 
>> +		usb_1: usb@a6f8800 {
>> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
>> +			reg = <0x0 0x0a6f8800 0x0 0x400>;
> 
> Please resend this using the flattened model
> 

Hi Konrad,

  I didn't want to disturb an ACKed series and hence I just tested and 
resent the patches as it. I will flatten it out once this is merged. 
Hope that would be fine.

Regards,
Krishna,

Re: [PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Konrad Dybcio]

[-- Attachment #1: Type: text/plain, Size: 1859 bytes --]

On 10/16/25 9:51 AM, Krishna Kurapati PSSNV wrote:
> 
> 
> On 10/16/2025 12:59 PM, Konrad Dybcio wrote:
>> On 10/15/25 12:52 PM, Krishna Kurapati wrote:
>>> From: Wesley Cheng <quic_wcheng@quicinc.com>
>>>
>>> Add the base USB devicetree definitions for SM8750 platforms.  The overall
>>> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
>>> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
>>> transition to using the M31 eUSB2 PHY compared to previous SoCs.
>>>
>>> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
>>> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
>>>
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>>> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
>>> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
>>> ---
>>
>> [...]
>>
>>> +        usb_1: usb@a6f8800 {
>>> +            compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
>>> +            reg = <0x0 0x0a6f8800 0x0 0x400>;
>>
>> Please resend this using the flattened model
>>
> 
> Hi Konrad,
> 
>  I didn't want to disturb an ACKed series and hence I just tested and resent the patches as it. I will flatten it out once this is merged. Hope that would be fine.

This series generates dt-bindings warnings as-is, so that's a reason
in itself..

Moreover, you're introducing a user for a known-limited ("broken")
dt-binding with the intention to fix it up soon(tm).. the changes are
not really groundbreaking so I think none of the reviewers will mind if
you just apply the below diff (attached, compile-tested only)

Konrad

[-- Attachment #2: 0001-x.patch --]
[-- Type: text/x-patch, Size: 5129 bytes --]

From 18550ea3f285c1c0bf36e2a9abd02780dd0f0af2 Mon Sep 17 00:00:00 2001
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Date: Thu, 16 Oct 2025 10:22:48 +0200
Subject: [PATCH] x

---
 .../bindings/usb/qcom,snps-dwc3.yaml          |  3 +
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts       |  6 +-
 arch/arm64/boot/dts/qcom/sm8750.dtsi          | 86 +++++++++----------
 3 files changed, 45 insertions(+), 50 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index dfd084ed9024..143865fde3a4 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -67,6 +67,7 @@ properties:
           - qcom,sm8450-dwc3
           - qcom,sm8550-dwc3
           - qcom,sm8650-dwc3
+          - qcom,sm8750-dwc3
           - qcom,x1e80100-dwc3
       - const: qcom,snps-dwc3
 
@@ -371,6 +372,7 @@ allOf:
           contains:
             enum:
               - qcom,sm8350-dwc3
+              - qcom,sm8750-dwc3
     then:
       properties:
         clocks:
@@ -498,6 +500,7 @@ allOf:
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
               - qcom,sm8650-dwc3
+              - qcom,sm8750-dwc3
     then:
       properties:
         interrupts:
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 815651f65214..c282f12c4d83 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -1122,11 +1122,9 @@ &uart7 {
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "peripheral";
+
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 450fe5b7f03e..d933c378bd8d 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -2651,9 +2651,9 @@ usb_dp_qmpphy_dp_in: endpoint {
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -2668,14 +2668,17 @@ usb_1: usb@a6f8800 {
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
+			assigned-clock-rates = <19200000>,
+					       <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -2692,54 +2695,45 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+
+			dma-coherent;
 
 			status = "disabled";
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xe000>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				port@0 {
+					reg = <0>;
 
-				iommus = <&apps_smmu 0x40 0x0>;
-
-				phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,usb2-gadget-lpm-disable;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,usb3_lpm_capable;
-				snps,usb2-lpm-disable;
-				snps,has-lpm-erratum;
-				tx-fifo-resize;
-
-				dma-coherent;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						usb_1_dwc3_hs: endpoint {
-						};
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 					};
 				};
 			};
-- 
2.51.0

Re: [PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Rob Herring (Arm)]

On Thu, 16 Oct 2025 13:21:19 +0530, Krishna Kurapati PSSNV wrote:
> 
> 
> On 10/16/2025 12:59 PM, Konrad Dybcio wrote:
> > On 10/15/25 12:52 PM, Krishna Kurapati wrote:
> >> From: Wesley Cheng <quic_wcheng@quicinc.com>
> >>
> >> Add the base USB devicetree definitions for SM8750 platforms.  The overall
> >> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
> >> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
> >> transition to using the M31 eUSB2 PHY compared to previous SoCs.
> >>
> >> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> >> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
> >>
> >> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> >> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> >> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
> >> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> >> ---
> >
> > [...]
> >
> >> +		usb_1: usb@a6f8800 {
> >> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
> >> +			reg = <0x0 0x0a6f8800 0x0 0x400>;
> >
> > Please resend this using the flattened model
> >
> 
> Hi Konrad,
> 
>   I didn't want to disturb an ACKed series and hence I just tested and
> resent the patches as it. I will flatten it out once this is merged.
> Hope that would be fine.
> 
> Regards,
> Krishna,
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/v6.18-rc1 (exact match)
 Base: tags/v6.18-rc1 (use --merge-base to override)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for fac1a1a1-43a9-4bec-a6be-812e7d97e807@oss.qualcomm.com:

arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: usb@a6f8800 (qcom,sm8750-dwc3): clock-names: ['cfg_noc', 'core', 'iface', 'sleep', 'mock_utmi'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/sm8750-mtp.dtb: usb@a6f8800 (qcom,sm8750-dwc3): clocks: [[36, 11], [36, 156], [36, 3], [36, 161], [36, 158]] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: usb@a6f8800 (qcom,sm8750-dwc3): clock-names: ['cfg_noc', 'core', 'iface', 'sleep', 'mock_utmi'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/sm8750-qrd.dtb: usb@a6f8800 (qcom,sm8750-dwc3): clocks: [[36, 11], [36, 156], [36, 3], [36, 161], [36, 158]] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#