From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH net-next v2 11/13] net: airoha: Refactor src port configuration in airhoha_set_gdm2_loopback
Date: Thu, 16 Oct 2025 12:28:25 +0200 [thread overview]
Message-ID: <20251016-an7583-eth-support-v2-11-ea6e7e9acbdb@kernel.org> (raw)
In-Reply-To: <20251016-an7583-eth-support-v2-0-ea6e7e9acbdb@kernel.org>
AN7583 chipset relies on different definitions for source-port
identifier used for hw offloading. In order to support hw offloading
in AN7583 controller, refactor src port configuration in
airhoha_set_gdm2_loopback routine and introduce get_src_port_id
callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/net/ethernet/airoha/airoha_eth.c | 82 +++++++++++++++++++++----------
drivers/net/ethernet/airoha/airoha_eth.h | 18 +++++--
drivers/net/ethernet/airoha/airoha_regs.h | 6 +--
3 files changed, 73 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index 5f6b5ab52e0265f7bb56b008ca653d64e04ff2d2..b9d36b841fe272a302125367a8d1e88e6e5adfbf 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -1682,13 +1682,17 @@ static int airoha_dev_set_macaddr(struct net_device *dev, void *p)
return 0;
}
-static void airhoha_set_gdm2_loopback(struct airoha_gdm_port *port)
+static int airhoha_set_gdm2_loopback(struct airoha_gdm_port *port)
{
- u32 pse_port = port->id == 3 ? FE_PSE_PORT_GDM3 : FE_PSE_PORT_GDM4;
+ u32 val, pse_port, chan = port->id == AIROHA_GDM3_IDX ? 4 : 0;
struct airoha_eth *eth = port->qdma->eth;
- u32 chan = port->id == 3 ? 4 : 0;
+ /* XXX: handle XSI_USB_PORT and XSI_PCE1_PORT */
+ u32 nbq = port->id == AIROHA_GDM3_IDX ? 4 : 0;
+ int src_port;
/* Forward the traffic to the proper GDM port */
+ pse_port = port->id == AIROHA_GDM3_IDX ? FE_PSE_PORT_GDM3
+ : FE_PSE_PORT_GDM4;
airoha_set_gdm_port_fwd_cfg(eth, REG_GDM_FWD_CFG(2), pse_port);
airoha_fe_clear(eth, REG_GDM_FWD_CFG(2), GDM_STRIP_CRC);
@@ -1709,29 +1713,25 @@ static void airhoha_set_gdm2_loopback(struct airoha_gdm_port *port)
airoha_fe_clear(eth, REG_FE_VIP_PORT_EN, BIT(2));
airoha_fe_clear(eth, REG_FE_IFC_PORT_EN, BIT(2));
- if (port->id == 3) {
- /* FIXME: handle XSI_PCE1_PORT */
- airoha_fe_rmw(eth, REG_FE_WAN_PORT,
- WAN1_EN_MASK | WAN1_MASK | WAN0_MASK,
- FIELD_PREP(WAN0_MASK, HSGMII_LAN_PCIE0_SRCPORT));
- airoha_fe_rmw(eth,
- REG_SP_DFT_CPORT(HSGMII_LAN_PCIE0_SRCPORT >> 3),
- SP_CPORT_PCIE0_MASK,
- FIELD_PREP(SP_CPORT_PCIE0_MASK,
- FE_PSE_PORT_CDM2));
- } else {
- /* FIXME: handle XSI_USB_PORT */
+ src_port = eth->soc->ops.get_src_port_id(port, nbq);
+ if (src_port < 0)
+ return src_port;
+
+ airoha_fe_rmw(eth, REG_FE_WAN_PORT,
+ WAN1_EN_MASK | WAN1_MASK | WAN0_MASK,
+ FIELD_PREP(WAN0_MASK, src_port));
+ val = src_port & SP_CPORT_DFT_MASK;
+ airoha_fe_rmw(eth,
+ REG_SP_DFT_CPORT(src_port >> fls(SP_CPORT_DFT_MASK)),
+ SP_CPORT_MASK(val),
+ FE_PSE_PORT_CDM2 << __ffs(SP_CPORT_MASK(val)));
+
+ if (port->id != AIROHA_GDM3_IDX)
airoha_fe_rmw(eth, REG_SRC_PORT_FC_MAP6,
FC_ID_OF_SRC_PORT24_MASK,
FIELD_PREP(FC_ID_OF_SRC_PORT24_MASK, 2));
- airoha_fe_rmw(eth, REG_FE_WAN_PORT,
- WAN1_EN_MASK | WAN1_MASK | WAN0_MASK,
- FIELD_PREP(WAN0_MASK, HSGMII_LAN_ETH_SRCPORT));
- airoha_fe_rmw(eth,
- REG_SP_DFT_CPORT(HSGMII_LAN_ETH_SRCPORT >> 3),
- SP_CPORT_ETH_MASK,
- FIELD_PREP(SP_CPORT_ETH_MASK, FE_PSE_PORT_CDM2));
- }
+
+ return 0;
}
static int airoha_dev_init(struct net_device *dev)
@@ -1748,8 +1748,13 @@ static int airoha_dev_init(struct net_device *dev)
case 3:
case 4:
/* If GDM2 is active we can't enable loopback */
- if (!eth->ports[1])
- airhoha_set_gdm2_loopback(port);
+ if (!eth->ports[1]) {
+ int err;
+
+ err = airhoha_set_gdm2_loopback(port);
+ if (err)
+ return err;
+ }
fallthrough;
case 2:
if (airoha_ppe_is_enabled(eth, 1)) {
@@ -3055,11 +3060,38 @@ static const char * const en7581_xsi_rsts_names[] = {
"xfp-mac",
};
+static int airoha_en7581_get_src_port_id(struct airoha_gdm_port *port, int nbq)
+{
+ switch (port->id) {
+ case 3:
+ /* 7581 SoC supports PCIe serdes on GDM3 port */
+ if (nbq == 4)
+ return HSGMII_LAN_7581_PCIE0_SRCPORT;
+ if (nbq == 5)
+ return HSGMII_LAN_7581_PCIE1_SRCPORT;
+ break;
+ case 4:
+ /* 7581 SoC supports eth and usb serdes on GDM4 port */
+ if (!nbq)
+ return HSGMII_LAN_7581_ETH_SRCPORT;
+ if (nbq == 1)
+ return HSGMII_LAN_7581_USB_SRCPORT;
+ break;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
static const struct airoha_eth_soc_data en7581_soc_data = {
.version = 0x7581,
.xsi_rsts_names = en7581_xsi_rsts_names,
.num_xsi_rsts = ARRAY_SIZE(en7581_xsi_rsts_names),
.num_ppe = 2,
+ .ops = {
+ .get_src_port_id = airoha_en7581_get_src_port_id,
+ },
};
static const struct of_device_id of_airoha_match[] = {
diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
index df168d798699d50c70fa5f87764de24e85994dfd..e09579da8c78a99ef07ee7eef7be3cd6c1b5be76 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -67,10 +67,10 @@ enum {
};
enum {
- HSGMII_LAN_PCIE0_SRCPORT = 0x16,
- HSGMII_LAN_PCIE1_SRCPORT,
- HSGMII_LAN_ETH_SRCPORT,
- HSGMII_LAN_USB_SRCPORT,
+ HSGMII_LAN_7581_PCIE0_SRCPORT = 0x16,
+ HSGMII_LAN_7581_PCIE1_SRCPORT,
+ HSGMII_LAN_7581_ETH_SRCPORT,
+ HSGMII_LAN_7581_USB_SRCPORT,
};
enum {
@@ -99,6 +99,13 @@ enum {
CRSN_25 = 0x19,
};
+enum airoha_gdm_index {
+ AIROHA_GDM1_IDX = 1,
+ AIROHA_GDM2_IDX = 2,
+ AIROHA_GDM3_IDX = 3,
+ AIROHA_GDM4_IDX = 4,
+};
+
enum {
FE_PSE_PORT_CDM1,
FE_PSE_PORT_GDM1,
@@ -555,6 +562,9 @@ struct airoha_eth_soc_data {
const char * const *xsi_rsts_names;
int num_xsi_rsts;
int num_ppe;
+ struct {
+ int (*get_src_port_id)(struct airoha_gdm_port *port, int nbq);
+ } ops;
};
struct airoha_eth {
diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
index 69c5a143db8c079be0a6ecf41081cd3f5048c090..ebcce00d9bc6f0b0dfe3cabeddaa59b26c7b289d 100644
--- a/drivers/net/ethernet/airoha/airoha_regs.h
+++ b/drivers/net/ethernet/airoha/airoha_regs.h
@@ -383,10 +383,8 @@
#define REG_MC_VLAN_DATA 0x2108
#define REG_SP_DFT_CPORT(_n) (0x20e0 + ((_n) << 2))
-#define SP_CPORT_PCIE1_MASK GENMASK(31, 28)
-#define SP_CPORT_PCIE0_MASK GENMASK(27, 24)
-#define SP_CPORT_USB_MASK GENMASK(7, 4)
-#define SP_CPORT_ETH_MASK GENMASK(7, 4)
+#define SP_CPORT_DFT_MASK GENMASK(2, 0)
+#define SP_CPORT_MASK(_n) GENMASK(3 + ((_n) << 2), ((_n) << 2))
#define REG_SRC_PORT_FC_MAP6 0x2298
#define FC_ID_OF_SRC_PORT27_MASK GENMASK(28, 24)
--
2.51.0
next prev parent reply other threads:[~2025-10-16 10:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-16 10:28 [PATCH net-next v2 00/13] net: airoha: Add AN7583 ethernet controller support Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 01/13] dt-bindings: net: airoha: Add AN7583 support Lorenzo Bianconi
2025-10-16 17:06 ` Conor Dooley
2025-10-16 10:28 ` [PATCH net-next v2 02/13] net: airoha: ppe: Dynamically allocate foe_check_time array in airoha_ppe struct Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 03/13] net: airoha: Add airoha_ppe_get_num_stats_entries() and airoha_ppe_get_num_total_stats_entries() Lorenzo Bianconi
2025-10-16 15:55 ` Simon Horman
2025-10-16 10:28 ` [PATCH net-next v2 04/13] net: airoha: Add airoha_eth_soc_data struct Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 05/13] net: airoha: Generalize airoha_ppe2_is_enabled routine Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 06/13] net: airoha: ppe: Move PPE memory info in airoha_eth_soc_data struct Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 07/13] net: airoha: ppe: Remove airoha_ppe_is_enabled() where not necessary Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 08/13] net: airoha: ppe: Configure SRAM PPE entries via the cpu Lorenzo Bianconi
2025-10-16 15:54 ` Simon Horman
2025-10-16 10:28 ` [PATCH net-next v2 09/13] net: airoha: ppe: Flush PPE SRAM table during PPE setup Lorenzo Bianconi
2025-10-16 10:28 ` [PATCH net-next v2 10/13] net: airoha: Select default ppe cpu port in airoha_dev_init() Lorenzo Bianconi
2025-10-16 15:59 ` Simon Horman
2025-10-16 10:28 ` Lorenzo Bianconi [this message]
2025-10-16 16:00 ` [PATCH net-next v2 11/13] net: airoha: Refactor src port configuration in airhoha_set_gdm2_loopback Simon Horman
2025-10-16 10:28 ` [PATCH net-next v2 12/13] net: airoha: ppe: Do not use magic numbers in airoha_ppe_foe_get_entry_locked() Lorenzo Bianconi
2025-10-16 16:00 ` Simon Horman
2025-10-16 10:28 ` [PATCH net-next v2 13/13] net: airoha: Add AN7583 SoC support Lorenzo Bianconi
2025-10-16 16:00 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251016-an7583-eth-support-v2-11-ea6e7e9acbdb@kernel.org \
--to=lorenzo@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).