devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: Conor Dooley <conor+dt@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	E Shattow <e@freeshell.de>, Paul Walmsley <pjw@kernel.org>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Hal Feng <hal.feng@starfivetech.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 0/7] Add support for StarFive VisionFive 2 Lite board
Date: Thu, 16 Oct 2025 16:00:47 +0800	[thread overview]
Message-ID: <20251016080054.12484-1-hal.feng@starfivetech.com> (raw)

VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S industrial
SoC which can run at -40~85 degrees centigrade and up to 1.25GHz.

Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI

VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html

Changes since RFC:
- Add jh7110s compatible to the generic cpufreq driver.
- Fix the dtbs_check error by adding the missing "enable-gpios" property
  in jh7110 pcie dt-bindings.
- Rebase on the latest mainline.
- Add VisionFive 2 Lite eMMC board device tree and add a common board dtsi
  for VisionFive 2 Lite variants.
- Add usb switch pin configuration (GPIO62).
- Improve the commit messages.

History:
RFC: https://lore.kernel.org/all/20250821100930.71404-1-hal.feng@starfivetech.com/

Hal Feng (7):
  cpufreq: dt-platdev: Add JH7110S SOC to the allowlist
  dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property
  dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite
    board
  riscv: dts: starfive: jh7110-common: Move out some nodes to the board
    dts
  riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite
    variants
  riscv: dts: starfive: Add VisionFive 2 Lite board device tree
  riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree

 .../bindings/pci/starfive,jh7110-pcie.yaml    |   4 +
 .../devicetree/bindings/riscv/starfive.yaml   |   6 +
 arch/riscv/boot/dts/starfive/Makefile         |   3 +
 .../boot/dts/starfive/jh7110-common.dtsi      |  19 ---
 .../jh7110-deepcomputing-fml13v01.dts         |  46 ++++++
 .../boot/dts/starfive/jh7110-milkv-mars.dts   |  46 ++++++
 .../dts/starfive/jh7110-milkv-marscm-emmc.dts |   9 ++
 .../dts/starfive/jh7110-milkv-marscm-lite.dts |   1 +
 .../dts/starfive/jh7110-milkv-marscm.dtsi     |  32 ++++
 .../dts/starfive/jh7110-pine64-star64.dts     |  46 ++++++
 .../jh7110-starfive-visionfive-2.dtsi         |  43 ++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |  16 --
 ...h7110s-starfive-visionfive-2-lite-emmc.dts |  22 +++
 .../jh7110s-starfive-visionfive-2-lite.dts    |  20 +++
 .../jh7110s-starfive-visionfive-2-lite.dtsi   | 145 ++++++++++++++++++
 drivers/cpufreq/cpufreq-dt-platdev.c          |   1 +
 16 files changed, 424 insertions(+), 35 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite-emmc.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi


base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
-- 
2.43.2


             reply	other threads:[~2025-10-16 14:37 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-16  8:00 Hal Feng [this message]
2025-10-16  8:00 ` [PATCH v1 1/7] cpufreq: dt-platdev: Add JH7110S SOC to the allowlist Hal Feng
2025-10-16  9:20   ` Heinrich Schuchardt
2025-10-17  5:09   ` Viresh Kumar
2025-10-16  8:00 ` [PATCH v1 2/7] dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property Hal Feng
2025-10-16  8:58   ` Heinrich Schuchardt
2025-10-16 15:51     ` Conor Dooley
2025-10-16  8:00 ` [PATCH v1 3/7] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-10-16  9:24   ` Heinrich Schuchardt
2025-10-16 15:55   ` Conor Dooley
2025-10-16  8:00 ` [PATCH v1 4/7] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts Hal Feng
2025-10-16 15:54   ` Conor Dooley
2025-10-16 22:55   ` E Shattow
2025-11-03  5:43     ` Hal Feng
2025-10-16  8:00 ` [PATCH v1 5/7] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants Hal Feng
2025-10-16  8:00 ` [PATCH v1 6/7] riscv: dts: starfive: Add VisionFive 2 Lite board device tree Hal Feng
2025-10-16  8:00 ` [PATCH v1 7/7] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251016080054.12484-1-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=e@freeshell.de \
    --cc=emil.renner.berthing@canonical.com \
    --cc=heinrich.schuchardt@canonical.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).