Re: [PATCH v6 10/11] dt-bindings: altera: removal of generic PE1 dts

[Rob Herring <robh@kernel.org>]

On Wed, Oct 15, 2025 at 07:44:15PM +0000, Lothar Rubusch wrote:
> Remove the binding for the generic Mercury+ AA1 on PE1 carrier board.
> 
> The removed Mercury+ AA1 on PE1 carrier board is just a particular
> setup case, which is actually replaced by the set of generic Mercury+
> AA1 combinations patch.
> 
> In other words a combination of a Mercury+ AA1 on a PE1 base board,
> with boot mode SD card is already covered by the generic AA1
> combinations. There is no further reason to keep this particular case
> now in a redundantly. Thus the redundant DT setup is removed.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/arm/altera.yaml | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
> index 73ba3cbff026..db61537b7115 100644
> --- a/Documentation/devicetree/bindings/arm/altera.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera.yaml
> @@ -31,7 +31,6 @@ properties:
>        - description: Mercury+ AA1 boards
>          items:
>            - enum:
> -              - enclustra,mercury-pe1

Well, never mind I guess.

>                - enclustra,mercury-aa1-pe1
>                - enclustra,mercury-aa1-pe3
>                - enclustra,mercury-aa1-st1
> -- 
> 2.39.5
>