From: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
To: Abel Vesa <abelvesa@kernel.org>, Peng Fan <peng.fan@nxp.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Daniel Baluta <daniel.baluta@nxp.com>,
Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: linux-clk@vger.kernel.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH v2 0/8] Add support for i.MX8ULP's SIM LPAV
Date: Fri, 17 Oct 2025 04:20:17 -0700 [thread overview]
Message-ID: <20251017112025.11997-1-laurentiumihalcea111@gmail.com> (raw)
From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The LPAV System Integration Module (SIM) is an IP found inside i.MX8ULP's
LPAV subsystem, which offers clock gating, reset line
assertion/de-assertion, and various other misc. options.
This series adds support for the IP by introducing a new clock HW provider
driver and by modifying i.MX8MP's AUDIOMIX block control reset driver to
allow it to be used for i.MX8ULP's SIM LPAV as well.
This series is a spin-off from [1].
[1]: https://lore.kernel.org/lkml/20240922174225.75948-1-laurentiumihalcea111@gmail.com/
---
Changes in v2:
* drop redundant description for "#clock-cells"/"#reset-cells" properties
from binding
* make "mux-controller" and "#reset-cells" properties mandatory
* add "mux-controller" child to binding example node
* drop the compatiblity with syscon - this was never actually needed and
it was done to allow using "mmio-mux", which requires a syscon parent
* modify the auxiliary reset driver to use regmap - this will allow the
mux controller, clock control and reset control APIs to use the same
spinlock
* rename "imx8ulp-reset-sim-lpav.h" to "fsl,imx8ulp-sim-lpav.h"
* drop the "IMX8ULP_CLK_SIM_LPAV_END" macro, which doesn't belong to the
binding headers
* fix the values of "IMX8MP_AUDIOMIX_EARC_RESET_MASK" and
"IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK", which were previously incorrect
* drop redundant macros from auxiliary reset driver - replace their
occurrences with their values
* squash the binding-related macro additions into the binding patch
* add mux-controller child node to the sim_lpav node
* make the "gates" array static
* link to v1: https://lore.kernel.org/lkml/20250804155407.285353-1-laurentiumihalcea111@gmail.com/
---
Laurentiu Mihalcea (8):
reset: imx8mp-audiomix: Fix bad mask values
dt-bindings: clock: document 8ULP's SIM LPAV
clk: imx: add driver for imx8ulp's sim lpav
reset: imx8mp-audiomix: Drop unneeded macros
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
arm64: dts: imx8ulp: add sim lpav node
.../bindings/clock/fsl,imx8ulp-sim-lpav.yaml | 72 ++++++
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 17 ++
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-imx8ulp-sim-lpav.c | 211 ++++++++++++++++++
drivers/reset/reset-imx8mp-audiomix.c | 174 +++++++++++----
include/dt-bindings/clock/imx8ulp-clock.h | 5 +
.../dt-bindings/reset/fsl,imx8ulp-sim-lpav.h | 16 ++
7 files changed, 453 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml
create mode 100644 drivers/clk/imx/clk-imx8ulp-sim-lpav.c
create mode 100644 include/dt-bindings/reset/fsl,imx8ulp-sim-lpav.h
--
2.43.0
next reply other threads:[~2025-10-17 11:21 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-17 11:20 Laurentiu Mihalcea [this message]
2025-10-17 11:20 ` [PATCH v2 1/8] reset: imx8mp-audiomix: Fix bad mask values Laurentiu Mihalcea
2025-10-17 14:28 ` Frank Li
2025-10-20 10:57 ` Laurentiu Mihalcea
2025-10-24 3:36 ` Shengjiu Wang
2025-10-27 9:54 ` Daniel Baluta
2025-10-17 11:20 ` [PATCH v2 2/8] dt-bindings: clock: document 8ULP's SIM LPAV Laurentiu Mihalcea
2025-10-17 14:33 ` Frank Li
2025-10-19 10:04 ` Krzysztof Kozlowski
2025-10-17 14:59 ` Frank Li
2025-10-19 10:05 ` Krzysztof Kozlowski
2025-10-20 15:22 ` Frank Li
2025-10-20 15:50 ` Krzysztof Kozlowski
2025-10-22 12:47 ` Laurentiu Mihalcea
2025-10-19 10:03 ` Krzysztof Kozlowski
2025-10-22 14:08 ` Peng Fan
2025-10-22 16:16 ` Frank Li
2025-10-27 15:17 ` Laurentiu Mihalcea
2025-10-27 9:55 ` Daniel Baluta
2025-10-17 11:20 ` [PATCH v2 3/8] clk: imx: add driver for imx8ulp's sim lpav Laurentiu Mihalcea
2025-10-17 14:41 ` Frank Li
2025-10-20 11:40 ` Laurentiu Mihalcea
2025-10-18 4:15 ` kernel test robot
2025-10-18 11:33 ` kernel test robot
2025-10-18 15:55 ` kernel test robot
2025-10-22 14:03 ` Peng Fan
2025-10-23 7:59 ` Peng Fan
2025-10-27 9:50 ` Laurentiu Mihalcea
2025-10-17 11:20 ` [PATCH v2 4/8] reset: imx8mp-audiomix: Drop unneeded macros Laurentiu Mihalcea
2025-10-17 14:44 ` Frank Li
2025-10-27 10:02 ` Daniel Baluta
2025-10-17 11:20 ` [PATCH v2 5/8] reset: imx8mp-audiomix: Switch to using regmap API Laurentiu Mihalcea
2025-10-17 14:49 ` Frank Li
2025-10-22 11:35 ` Laurentiu Mihalcea
2025-10-17 11:20 ` [PATCH v2 6/8] reset: imx8mp-audiomix: Extend the driver usage Laurentiu Mihalcea
2025-10-17 14:56 ` Frank Li
2025-10-20 11:59 ` Laurentiu Mihalcea
2025-10-20 15:08 ` Frank Li
2025-10-20 14:06 ` Laurentiu Mihalcea
2025-10-20 14:52 ` Frank Li
2025-10-20 14:18 ` Daniel Baluta
2025-10-17 11:20 ` [PATCH v2 7/8] reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV Laurentiu Mihalcea
2025-10-17 14:57 ` Frank Li
2025-10-20 14:29 ` Laurentiu Mihalcea
2025-10-20 14:50 ` Frank Li
2025-10-21 13:16 ` Laurentiu Mihalcea
2025-10-21 15:06 ` Frank Li
2025-10-17 11:20 ` [PATCH v2 8/8] arm64: dts: imx8ulp: add sim lpav node Laurentiu Mihalcea
2025-10-27 10:07 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251017112025.11997-1-laurentiumihalcea111@gmail.com \
--to=laurentiumihalcea111@gmail.com \
--cc=abelvesa@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).