[PATCH v2 8/8] arm64: dts: imx8ulp: add sim lpav node

[Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add DT node for the SIM LPAV module.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 13b01f3aa2a4..676535c3fc84 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -776,6 +776,23 @@ edma2: dma-controller@2d800000 {
 						"ch28", "ch29", "ch30", "ch31";
 			};
 
+			sim_lpav: clock-controller@2da50000 {
+				compatible = "fsl,imx8ulp-sim-lpav";
+				reg = <0x2da50000 0x10000>;
+				clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>,
+					 <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>,
+					 <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>;
+				clock-names = "lpav_bus", "hifi_core", "hifi_plat";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				sim_lpav_mux: mux-controller {
+					compatible = "reg-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x8 0x00000200>;
+				};
+			};
+
 			cgc2: clock-controller@2da60000 {
 				compatible = "fsl,imx8ulp-cgc2";
 				reg = <0x2da60000 0x10000>;
-- 
2.43.0