From: Richard Genoud <richard.genoud@bootlin.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Wentao Liang" <vulab@iscas.ac.cn>,
"Johan Hovold" <johan@kernel.org>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
"Richard Genoud" <richard.genoud@bootlin.com>
Subject: [PATCH v3 04/15] mtd: rawnand: sunxi: introduce reg_user_data in sunxi_nfc_caps
Date: Mon, 20 Oct 2025 12:13:00 +0200 [thread overview]
Message-ID: <20251020101311.256819-5-richard.genoud@bootlin.com> (raw)
In-Reply-To: <20251020101311.256819-1-richard.genoud@bootlin.com>
The H6/H616 USER_DATA register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
---
drivers/mtd/nand/raw/sunxi_nand.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 0285e4d0ca7f..8f5d8df19e33 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -48,7 +48,8 @@
#define NFC_REG_DEBUG 0x003C
#define NFC_REG_A10_ECC_ERR_CNT 0x0040
#define NFC_REG_ECC_ERR_CNT(nfc, x) ((nfc->caps->reg_ecc_err_cnt + (x)) & ~0x3)
-#define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4))
+#define NFC_REG_A10_USER_DATA 0x0050
+#define NFC_REG_USER_DATA(nfc, x) (nfc->caps->reg_user_data + ((x) * 4))
#define NFC_REG_SPARE_AREA 0x00A0
#define NFC_REG_PAT_ID 0x00A4
#define NFC_REG_MDMA_ADDR 0x00C0
@@ -214,6 +215,7 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
* through MBUS on A23/A33 needs extra configuration.
* @reg_io_data: I/O data register
* @reg_ecc_err_cnt: ECC error counter register
+ * @reg_user_data: User data register
* @dma_maxburst: DMA maxburst
* @ecc_strengths: Available ECC strengths array
* @nstrengths: Size of @ecc_strengths
@@ -222,6 +224,7 @@ struct sunxi_nfc_caps {
bool has_mdma;
unsigned int reg_io_data;
unsigned int reg_ecc_err_cnt;
+ unsigned int reg_user_data;
unsigned int dma_maxburst;
const u8 *ecc_strengths;
unsigned int nstrengths;
@@ -723,8 +726,8 @@ static void sunxi_nfc_hw_ecc_get_prot_oob_bytes(struct nand_chip *nand, u8 *oob,
{
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
- sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(step)),
- oob);
+ sunxi_nfc_user_data_to_buf(readl(nfc->regs +
+ NFC_REG_USER_DATA(nfc, step)), oob);
/* De-randomize the Bad Block Marker. */
if (bbm && (nand->options & NAND_NEED_SCRAMBLING))
@@ -746,7 +749,7 @@ static void sunxi_nfc_hw_ecc_set_prot_oob_bytes(struct nand_chip *nand,
}
writel(sunxi_nfc_buf_to_user_data(oob),
- nfc->regs + NFC_REG_USER_DATA(step));
+ nfc->regs + NFC_REG_USER_DATA(nfc, step));
}
static void sunxi_nfc_hw_ecc_update_stats(struct nand_chip *nand,
@@ -2181,6 +2184,7 @@ static const u8 sunxi_ecc_strengths_a10[] = {
static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = {
.reg_io_data = NFC_REG_A10_IO_DATA,
.reg_ecc_err_cnt = NFC_REG_A10_ECC_ERR_CNT,
+ .reg_user_data = NFC_REG_A10_USER_DATA,
.dma_maxburst = 4,
.ecc_strengths = sunxi_ecc_strengths_a10,
.nstrengths = ARRAY_SIZE(sunxi_ecc_strengths_a10),
@@ -2190,6 +2194,7 @@ static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
.has_mdma = true,
.reg_io_data = NFC_REG_A23_IO_DATA,
.reg_ecc_err_cnt = NFC_REG_A10_ECC_ERR_CNT,
+ .reg_user_data = NFC_REG_A10_USER_DATA,
.dma_maxburst = 8,
.ecc_strengths = sunxi_ecc_strengths_a10,
.nstrengths = ARRAY_SIZE(sunxi_ecc_strengths_a10),
next prev parent reply other threads:[~2025-10-20 10:13 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-20 10:12 [PATCH v3 00/15] Introduce Allwinner H6/H616 NAND controller support Richard Genoud
2025-10-20 10:12 ` [PATCH v3 01/15] mtd: rawnand: sunxi: Remove superfluous register readings Richard Genoud
2025-10-20 10:12 ` [PATCH v3 02/15] mtd: rawnand: sunxi: move ECC strenghts in sunxi_nfc_caps Richard Genoud
2025-10-20 10:12 ` [PATCH v3 03/15] mtd: rawnand: sunxi: introduce reg_ecc_err_cnt " Richard Genoud
2025-10-20 10:13 ` Richard Genoud [this message]
2025-10-22 8:54 ` [PATCH v3 04/15] mtd: rawnand: sunxi: introduce reg_user_data " Miquel Raynal
2025-10-22 9:07 ` Johan Hovold
2025-10-24 7:20 ` Richard GENOUD
2025-10-20 10:13 ` [PATCH v3 05/15] mtd: rawnand: sunxi: rework pattern found registers Richard Genoud
2025-10-22 9:02 ` Miquel Raynal
2025-10-22 10:05 ` Geert Uytterhoeven
2025-10-20 10:13 ` [PATCH v3 06/15] mtd: rawnand: sunxi: add has_ecc_block_512 capability Richard Genoud
2025-10-20 10:13 ` [PATCH v3 07/15] mtd: rawnand: sunxi: introduce ecc_mode_mask in sunxi_nfc_caps Richard Genoud
2025-10-22 9:05 ` Miquel Raynal
2025-10-24 7:52 ` Richard GENOUD
2025-10-20 10:13 ` [PATCH v3 08/15] mtd: rawnand: sunxi: introduce random en/dir " Richard Genoud
2025-10-20 10:13 ` [PATCH v3 09/15] mtd: rawnand: sunxi: introduce reg_pat_id " Richard Genoud
2025-10-20 10:13 ` [PATCH v3 10/15] mtd: rawnand: sunxi: introduce reg_spare_area " Richard Genoud
2025-10-20 10:13 ` [PATCH v3 11/15] mtd: rawnand: sunxi: introduce ecc_err_mask " Richard Genoud
2025-10-20 10:13 ` [PATCH v3 12/15] mtd: rawnand: sunxi: introduce sram_size " Richard Genoud
2025-10-20 10:13 ` [PATCH v3 13/15] mtd: rawnand: sunxi: Add support for H616 nand controller Richard Genoud
2025-10-22 9:18 ` Miquel Raynal
2025-10-28 7:30 ` Richard GENOUD
2025-10-20 10:13 ` [PATCH v3 14/15] dt-bindings: mtd: sunxi: Add H616 compatible Richard Genoud
2025-10-20 17:18 ` Conor Dooley
2025-10-22 9:20 ` Miquel Raynal
2025-10-24 9:08 ` Richard GENOUD
2025-10-20 10:13 ` [PATCH v3 15/15] arm64: dts: allwinner: h616: add NAND controller Richard Genoud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251020101311.256819-5-richard.genoud@bootlin.com \
--to=richard.genoud@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=johan@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=miquel.raynal@bootlin.com \
--cc=mripard@kernel.org \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=u.kleine-koenig@baylibre.com \
--cc=vigneshr@ti.com \
--cc=vulab@iscas.ac.cn \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).