[PATCH v4 06/12] pinctrl: stm32: Simplify handling of backup pin status

[Antonio Borneo <antonio.borneo@foss.st.com>]

Use C bit-field to keep the backup of the pin status, instead of
explicitly handling the bit-field through shift and mask of a u32
container.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 70 +++++++++------------------
 1 file changed, 24 insertions(+), 46 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 6c5f9e015e8e1..66f9783fce862 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -54,18 +54,6 @@
 #define STM32_GPIO_CIDCFGR(x)	(0x50 + (0x8 * (x)))
 #define STM32_GPIO_SEMCR(x)	(0x54 + (0x8 * (x)))
 
-/* custom bitfield to backup pin status */
-#define STM32_GPIO_BKP_MODE_SHIFT	0
-#define STM32_GPIO_BKP_MODE_MASK	GENMASK(1, 0)
-#define STM32_GPIO_BKP_ALT_SHIFT	2
-#define STM32_GPIO_BKP_ALT_MASK		GENMASK(5, 2)
-#define STM32_GPIO_BKP_SPEED_SHIFT	6
-#define STM32_GPIO_BKP_SPEED_MASK	GENMASK(7, 6)
-#define STM32_GPIO_BKP_PUPD_SHIFT	8
-#define STM32_GPIO_BKP_PUPD_MASK	GENMASK(9, 8)
-#define STM32_GPIO_BKP_TYPE		10
-#define STM32_GPIO_BKP_VAL		11
-
 #define STM32_GPIO_CIDCFGR_CFEN		BIT(0)
 #define STM32_GPIO_CIDCFGR_SEMEN	BIT(1)
 #define STM32_GPIO_CIDCFGR_SCID_MASK	GENMASK(5, 4)
@@ -100,6 +88,15 @@ struct stm32_pinctrl_group {
 	unsigned pin;
 };
 
+struct stm32_pin_backup {
+	unsigned int alt:4;
+	unsigned int mode:2;
+	unsigned int bias:2;
+	unsigned int speed:2;
+	unsigned int drive:1;
+	unsigned int value:1;
+};
+
 struct stm32_gpio_bank {
 	void __iomem *base;
 	struct reset_control *rstc;
@@ -110,7 +107,7 @@ struct stm32_gpio_bank {
 	struct irq_domain *domain;
 	u32 bank_nr;
 	u32 bank_ioport_nr;
-	u32 pin_backup[STM32_GPIO_PINS_PER_BANK];
+	struct stm32_pin_backup pin_backup[STM32_GPIO_PINS_PER_BANK];
 	u8 irq_type[STM32_GPIO_PINS_PER_BANK];
 	bool secure_control;
 	bool rif_control;
@@ -176,38 +173,32 @@ static inline u32 stm32_gpio_get_alt(u32 function)
 static void stm32_gpio_backup_value(struct stm32_gpio_bank *bank,
 				    u32 offset, u32 value)
 {
-	bank->pin_backup[offset] &= ~BIT(STM32_GPIO_BKP_VAL);
-	bank->pin_backup[offset] |= value << STM32_GPIO_BKP_VAL;
+	bank->pin_backup[offset].value = value;
 }
 
 static void stm32_gpio_backup_mode(struct stm32_gpio_bank *bank, u32 offset,
 				   u32 mode, u32 alt)
 {
-	bank->pin_backup[offset] &= ~(STM32_GPIO_BKP_MODE_MASK |
-				      STM32_GPIO_BKP_ALT_MASK);
-	bank->pin_backup[offset] |= mode << STM32_GPIO_BKP_MODE_SHIFT;
-	bank->pin_backup[offset] |= alt << STM32_GPIO_BKP_ALT_SHIFT;
+	bank->pin_backup[offset].mode = mode;
+	bank->pin_backup[offset].alt = alt;
 }
 
 static void stm32_gpio_backup_driving(struct stm32_gpio_bank *bank, u32 offset,
 				      u32 drive)
 {
-	bank->pin_backup[offset] &= ~BIT(STM32_GPIO_BKP_TYPE);
-	bank->pin_backup[offset] |= drive << STM32_GPIO_BKP_TYPE;
+	bank->pin_backup[offset].drive = drive;
 }
 
 static void stm32_gpio_backup_speed(struct stm32_gpio_bank *bank, u32 offset,
 				    u32 speed)
 {
-	bank->pin_backup[offset] &= ~STM32_GPIO_BKP_SPEED_MASK;
-	bank->pin_backup[offset] |= speed << STM32_GPIO_BKP_SPEED_SHIFT;
+	bank->pin_backup[offset].speed = speed;
 }
 
 static void stm32_gpio_backup_bias(struct stm32_gpio_bank *bank, u32 offset,
 				   u32 bias)
 {
-	bank->pin_backup[offset] &= ~STM32_GPIO_BKP_PUPD_MASK;
-	bank->pin_backup[offset] |= bias << STM32_GPIO_BKP_PUPD_SHIFT;
+	bank->pin_backup[offset].bias = bias;
 }
 
 /* RIF functions */
@@ -1798,7 +1789,7 @@ static int __maybe_unused stm32_pinctrl_restore_gpio_regs(
 					struct stm32_pinctrl *pctl, u32 pin)
 {
 	const struct pin_desc *desc = pin_desc_get(pctl->pctl_dev, pin);
-	u32 val, alt, mode, offset = stm32_gpio_pin(pin);
+	u32 mode, offset = stm32_gpio_pin(pin);
 	struct pinctrl_gpio_range *range;
 	struct stm32_gpio_bank *bank;
 	bool pin_is_irq;
@@ -1818,36 +1809,23 @@ static int __maybe_unused stm32_pinctrl_restore_gpio_regs(
 
 	bank = gpiochip_get_data(range->gc);
 
-	alt = bank->pin_backup[offset] & STM32_GPIO_BKP_ALT_MASK;
-	alt >>= STM32_GPIO_BKP_ALT_SHIFT;
-	mode = bank->pin_backup[offset] & STM32_GPIO_BKP_MODE_MASK;
-	mode >>= STM32_GPIO_BKP_MODE_SHIFT;
-
-	ret = stm32_pmx_set_mode(bank, offset, mode, alt);
+	mode = bank->pin_backup[offset].mode;
+	ret = stm32_pmx_set_mode(bank, offset, mode, bank->pin_backup[offset].alt);
 	if (ret)
 		return ret;
 
-	if (mode == 1) {
-		val = bank->pin_backup[offset] & BIT(STM32_GPIO_BKP_VAL);
-		val = val >> STM32_GPIO_BKP_VAL;
-		__stm32_gpio_set(bank, offset, val);
-	}
+	if (mode == 1)
+		__stm32_gpio_set(bank, offset, bank->pin_backup[offset].value);
 
-	val = bank->pin_backup[offset] & BIT(STM32_GPIO_BKP_TYPE);
-	val >>= STM32_GPIO_BKP_TYPE;
-	ret = stm32_pconf_set_driving(bank, offset, val);
+	ret = stm32_pconf_set_driving(bank, offset, bank->pin_backup[offset].drive);
 	if (ret)
 		return ret;
 
-	val = bank->pin_backup[offset] & STM32_GPIO_BKP_SPEED_MASK;
-	val >>= STM32_GPIO_BKP_SPEED_SHIFT;
-	ret = stm32_pconf_set_speed(bank, offset, val);
+	ret = stm32_pconf_set_speed(bank, offset, bank->pin_backup[offset].speed);
 	if (ret)
 		return ret;
 
-	val = bank->pin_backup[offset] & STM32_GPIO_BKP_PUPD_MASK;
-	val >>= STM32_GPIO_BKP_PUPD_SHIFT;
-	ret = stm32_pconf_set_bias(bank, offset, val);
+	ret = stm32_pconf_set_bias(bank, offset, bank->pin_backup[offset].bias);
 	if (ret)
 		return ret;
 
-- 
2.34.1