Re: [PATCH v3 2/2] iio: pressure: adp810: Add driver for adp810 sensor

[Jonathan Cameron <jonathan.cameron@huawei.com>]

> 
> >  # When adding new entries keep the list in alphabetical order
> >  obj-$(CONFIG_ABP060MG) += abp060mg.o
> > +obj-$(CONFIG_ADP810) += adp810.o
> >  obj-$(CONFIG_ROHM_BM1390) += rohm-bm1390.o
> >  obj-$(CONFIG_BMP280) += bmp280.o
> >  bmp280-objs := bmp280-core.o bmp280-regmap.o
> > @@ -15,6 +16,7 @@ obj-$(CONFIG_DPS310) += dps310.o
> >  obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
> >  obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
> >  obj-$(CONFIG_HP03) += hp03.o
> > +obj-$(CONFIG_HP206C) += hp206c.o
> >  obj-$(CONFIG_HSC030PA) += hsc030pa.o
> >  obj-$(CONFIG_HSC030PA_I2C) += hsc030pa_i2c.o
> >  obj-$(CONFIG_HSC030PA_SPI) += hsc030pa_spi.o
> > @@ -34,11 +36,9 @@ obj-$(CONFIG_SDP500) += sdp500.o
> >  obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
> >  st_pressure-y := st_pressure_core.o
> >  st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
> > +obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
> > +obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
> >  obj-$(CONFIG_T5403) += t5403.o
> > -obj-$(CONFIG_HP206C) += hp206c.o
> >  obj-$(CONFIG_ZPA2326) += zpa2326.o
> >  obj-$(CONFIG_ZPA2326_I2C) += zpa2326_i2c.o
> >  obj-$(CONFIG_ZPA2326_SPI) += zpa2326_spi.o
> > -
> > -obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
> > -obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o  
> 
> I would split order fix into a separate change, but if maintainers are okay
> with this approach, I would not object.

I was late to replying to v2 on this.  Split it out please.