[PATCH v3 02/20] dt-bindings: mfd: samsung,s2mps11: split s2mpg10 into separate file

["André Draszik" <andre.draszik@linaro.org>]

The s2mpg10 binding is going to acquire various additional properties.
To avoid making the common samsung,s2mps11 binding file too complicated
due to additional nesting, split s2mpg10 out into its own file.

As a side-effect, the oneOf for the interrupts is not required anymore,
as the required: node is at the top-level now.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
Note: checkpatch suggests to update MAINTAINERS, but the new file is
covered already due to using a wildcard.

v3:
- new patch (Krzysztof)
---
 .../devicetree/bindings/mfd/samsung,s2mpg10.yaml   | 46 ++++++++++++++++++++++
 .../devicetree/bindings/mfd/samsung,s2mps11.yaml   | 29 +-------------
 2 files changed, 47 insertions(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpg10.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpg10.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..841b7c8ab556bc6a3d4cc8d5a0c811814d4176be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpg10.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpg10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPG10 Power Management IC
+
+maintainers:
+  - André Draszik <andre.draszik@linaro.org>
+
+description: |
+  This is part of the device tree bindings for the S2MPG family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPG10 is a Power Management IC for mobile applications with buck
+  converters, various LDOs, power meters, RTC, clock outputs, and additional
+  GPIO interfaces.
+
+properties:
+  compatible:
+    const: samsung,s2mpg10-pmic
+
+  clocks:
+    $ref: /schemas/clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulators.
+
+  system-power-controller: true
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - interrupts
+  - regulators
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index 31d544a9c05cad878d10a0ae9b99631f08eb04a8..ac5d0c149796b6a4034b5d4245bfa8be0433cfab 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -20,7 +20,6 @@ description: |
 properties:
   compatible:
     enum:
-      - samsung,s2mpg10-pmic
       - samsung,s2mps11-pmic
       - samsung,s2mps13-pmic
       - samsung,s2mps14-pmic
@@ -59,42 +58,16 @@ properties:
       reset (setting buck voltages to default values).
     type: boolean
 
-  system-power-controller: true
-
   wakeup-source: true
 
 required:
   - compatible
+  - reg
   - regulators
 
 additionalProperties: false
 
 allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: samsung,s2mpg10-pmic
-    then:
-      properties:
-        reg: false
-        samsung,s2mps11-acokb-ground: false
-        samsung,s2mps11-wrstbi-ground: false
-
-      # oneOf is required, because dtschema's fixups.py doesn't handle this
-      # nesting here. Its special treatment to allow either interrupt property
-      # when only one is specified in the binding works at the top level only.
-      oneOf:
-        - required: [interrupts]
-        - required: [interrupts-extended]
-
-    else:
-      properties:
-        system-power-controller: false
-
-      required:
-        - reg
-
   - if:
       properties:
         compatible:

-- 
2.51.2.997.g839fc31de9-goog