devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shenwei Wang <shenwei.wang@nxp.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Jonathan Corbet <corbet@lwn.net>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Shenwei Wang <shenwei.wang@nxp.com>, Peng Fan <peng.fan@nxp.com>,
	linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-imx@nxp.com
Subject: [PATCH v5 2/5] remoteproc: imx_rproc: Populate devices under "rpmsg" subnode
Date: Tue,  4 Nov 2025 14:33:12 -0600	[thread overview]
Message-ID: <20251104203315.85706-3-shenwei.wang@nxp.com> (raw)
In-Reply-To: <20251104203315.85706-1-shenwei.wang@nxp.com>

Register the RPMsg channel driver and populate remote devices defined
under the "rpmsg" subnode upon receiving their notification messages.

The following illustrates the expected DTS layout structure:

	cm33: remoteproc-cm33 {
		compatible = "fsl,imx8ulp-cm33";

		rpmsg {
			rpmsg-io-channel {
				gpio@0 {
					compatible = "fsl,imx-rpmsg-gpio";
					reg = <0>;
				};

				gpio@1 {
					compatible = "fsl,imx-rpmsg-gpio";
					reg = <1>;
				};

				...
			};

			rpmsg-i2c-channel {
				i2c@0 {
					compatible = "fsl,imx-rpmsg-i2c";
					reg = <0>;
				};
			};

			...
		};
	};

Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
 drivers/remoteproc/imx_rproc.c  | 146 ++++++++++++++++++++++++++++++++
 include/linux/rpmsg/imx_rpmsg.h |  48 +++++++++++
 2 files changed, 194 insertions(+)
 create mode 100644 include/linux/rpmsg/imx_rpmsg.h

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index a6eef0080ca9..e21a7980c490 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/firmware/imx/sci.h>
+#include <linux/rpmsg/imx_rpmsg.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mailbox_client.h>
@@ -15,6 +16,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
@@ -22,6 +25,7 @@
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
+#include <linux/rpmsg.h>
 #include <linux/workqueue.h>
 
 #include "imx_rproc.h"
@@ -1084,6 +1088,144 @@ static int imx_rproc_sys_off_handler(struct sys_off_data *data)
 	return NOTIFY_DONE;
 }
 
+struct imx_rpmsg_driver {
+	struct rpmsg_driver rpdrv;
+	void *driver_data;
+};
+
+static char *channel_device_map[][2] = {
+	{"rpmsg-io-channel", "fsl,imx-rpmsg-gpio"},
+	{"rpmsg-i2c-channel", "fsl,imx-rpmsg-i2c"},
+};
+
+static int imx_rpmsg_endpoint_cb(struct rpmsg_device *rpdev, void *data,
+				 int len, void *priv, u32 src)
+{
+	struct imx_rpmsg_driver_data *drvdata;
+
+	drvdata = dev_get_drvdata(&rpdev->dev);
+	if (drvdata && drvdata->rx_callback)
+		return drvdata->rx_callback(rpdev, data, len, priv, src);
+
+	return 0;
+}
+
+static void imx_rpmsg_endpoint_remove(struct rpmsg_device *rpdev)
+{
+	of_platform_depopulate(&rpdev->dev);
+}
+
+static int imx_rpmsg_endpoint_probe(struct rpmsg_device *rpdev)
+{
+	struct imx_rpmsg_driver_data *drvdata;
+	struct imx_rpmsg_driver *imx_rpdrv;
+	struct device *dev = &rpdev->dev;
+	struct of_dev_auxdata *auxdata;
+	struct rpmsg_driver *rpdrv;
+	int i;
+
+	rpdrv = container_of(dev->driver, struct rpmsg_driver, drv);
+	imx_rpdrv = container_of(rpdrv, struct imx_rpmsg_driver, rpdrv);
+
+	if (!imx_rpdrv->driver_data)
+		return -EINVAL;
+
+	drvdata = devm_kmemdup(dev, imx_rpdrv->driver_data, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	i = drvdata->map_idx;
+	if (i >= ARRAY_SIZE(channel_device_map))
+		return -ENODEV;
+
+	auxdata = devm_kzalloc(dev, sizeof(*auxdata) * 2, GFP_KERNEL);
+	if (!auxdata)
+		return -ENOMEM;
+
+	drvdata->rpdev = rpdev;
+	auxdata[0].compatible = channel_device_map[i][1];
+	auxdata[0].platform_data = drvdata;
+	dev_set_drvdata(dev, drvdata);
+
+	of_platform_populate(drvdata->channel_node, NULL, auxdata, dev);
+	of_node_put(drvdata->channel_node);
+
+	return 0;
+}
+
+static int imx_of_rpmsg_is_in_map(const char *name)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(channel_device_map); i++) {
+		if (strcmp(name, channel_device_map[i][0]) == 0)
+			return i;
+	}
+
+	return -1;
+}
+
+static int imx_of_rpmsg_register_rpdriver(struct device_node *channel,
+					  struct device *dev, int idx)
+{
+	struct imx_rpmsg_driver_data *driver_data;
+	struct imx_rpmsg_driver *rp_driver;
+	struct rpmsg_device_id *rpdev_id;
+
+	rpdev_id = devm_kzalloc(dev, sizeof(*rpdev_id) * 2, GFP_KERNEL);
+	if (!rpdev_id)
+		return -ENOMEM;
+
+	strscpy(rpdev_id[0].name, channel_device_map[idx][0], RPMSG_NAME_SIZE);
+
+	rp_driver = devm_kzalloc(dev, sizeof(*rp_driver), GFP_KERNEL);
+	if (!rp_driver)
+		return -ENOMEM;
+
+	driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL);
+	if (!driver_data)
+		return -ENOMEM;
+
+	driver_data->rproc_name = dev->of_node->name;
+	driver_data->channel_node = channel;
+	driver_data->map_idx = idx;
+
+	rp_driver->rpdrv.drv.name = channel_device_map[idx][0];
+	rp_driver->rpdrv.id_table = rpdev_id;
+	rp_driver->rpdrv.probe = imx_rpmsg_endpoint_probe;
+	rp_driver->rpdrv.remove = imx_rpmsg_endpoint_remove;
+	rp_driver->rpdrv.callback = imx_rpmsg_endpoint_cb;
+	rp_driver->driver_data = driver_data;
+
+	register_rpmsg_driver(&rp_driver->rpdrv);
+
+	return 0;
+}
+
+static int imx_of_rpmsg_node_init(struct platform_device *pdev)
+{
+	struct device_node *np __free(device_node);
+	struct device *dev = &pdev->dev;
+	int idx, ret;
+
+	np = of_get_child_by_name(dev->of_node, "rpmsg");
+	if (!np)
+		return 0;
+
+	for_each_child_of_node_scoped(np, child) {
+		idx = imx_of_rpmsg_is_in_map(child->name);
+		if (idx < 0)
+			ret = of_platform_default_populate(child, NULL, dev);
+		else
+			ret = imx_of_rpmsg_register_rpdriver(child, dev, idx);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int imx_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1177,6 +1319,10 @@ static int imx_rproc_probe(struct platform_device *pdev)
 		goto err_put_clk;
 	}
 
+	ret = imx_of_rpmsg_node_init(pdev);
+	if (ret < 0)
+		dev_info(dev, "populating 'rpmsg' node failed\n");
+
 	return 0;
 
 err_put_clk:
diff --git a/include/linux/rpmsg/imx_rpmsg.h b/include/linux/rpmsg/imx_rpmsg.h
new file mode 100644
index 000000000000..04a5ad2d4a1d
--- /dev/null
+++ b/include/linux/rpmsg/imx_rpmsg.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright 2025 NXP */
+
+/*
+ * @file linux/imx_rpmsg.h
+ *
+ * @brief Global header file for iMX RPMSG
+ *
+ * @ingroup RPMSG
+ */
+#ifndef __LINUX_IMX_RPMSG_H__
+#define __LINUX_IMX_RPMSG_H__
+
+/* Category define */
+#define IMX_RMPSG_LIFECYCLE	1
+#define IMX_RPMSG_PMIC		2
+#define IMX_RPMSG_AUDIO		3
+#define IMX_RPMSG_KEY		4
+#define IMX_RPMSG_GPIO		5
+#define IMX_RPMSG_RTC		6
+#define IMX_RPMSG_SENSOR	7
+
+/* rpmsg version */
+#define IMX_RMPSG_MAJOR		1
+#define IMX_RMPSG_MINOR		0
+
+#define MAX_DEV_PER_CHANNEL	10
+
+struct imx_rpmsg_head {
+	u8 cate;	/* Category */
+	u8 major;	/* Major version */
+	u8 minor;	/* Minor version */
+	u8 type;	/* Message type */
+	u8 cmd;		/* Command code */
+	u8 reserved[5];
+} __packed;
+
+struct imx_rpmsg_driver_data {
+	int map_idx;
+	const char *rproc_name;
+	struct rpmsg_device *rpdev;
+	struct device_node *channel_node;
+	int (*rx_callback)(struct rpmsg_device *rpdev, void *data,
+			   int len, void *priv, u32 src);
+	void *channel_devices[MAX_DEV_PER_CHANNEL];
+};
+
+#endif /* __LINUX_IMX_RPMSG_H__ */
-- 
2.43.0


  parent reply	other threads:[~2025-11-04 20:34 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-04 20:33 [PATCH v5 0/5] Enable Remote GPIO over RPMSG on i.MX Platform Shenwei Wang
2025-11-04 20:33 ` [PATCH v5 1/5] dt-bindings: remoteproc: imx_rproc: Add "rpmsg" subnode support Shenwei Wang
2025-11-06 18:18   ` Andrew Lunn
2025-11-04 20:33 ` Shenwei Wang [this message]
2025-11-06  7:56   ` [PATCH v5 2/5] remoteproc: imx_rproc: Populate devices under "rpmsg" subnode Peng Fan
2025-11-06 18:23     ` Andrew Lunn
2025-11-04 20:33 ` [PATCH v5 3/5] docs: staging: gpio-rpmsg: gpio over rpmsg bus Shenwei Wang
2025-11-06 19:05   ` Andrew Lunn
2025-11-06 20:40     ` Shenwei Wang
2025-11-06 21:32       ` Andrew Lunn
2025-11-06 23:13         ` Shenwei Wang
2025-11-07  0:31           ` Andrew Lunn
2025-11-07 21:24             ` Shenwei Wang
2025-11-08 17:45               ` Andrew Lunn
2025-11-10 15:24                 ` Shenwei Wang
2025-11-10 15:59                   ` Andrew Lunn
2025-11-10 16:30                     ` Shenwei Wang
2025-11-10 17:58                       ` Andrew Lunn
2025-11-11 10:35   ` Linus Walleij
2025-11-11 16:45     ` Shenwei Wang
2025-11-04 20:33 ` [PATCH v5 4/5] gpio: imx-rpmsg: add imx-rpmsg GPIO driver Shenwei Wang
2025-11-06  8:12   ` Peng Fan
2025-11-06 12:31   ` Zhongqiu Han
2025-11-06 17:00     ` Shenwei Wang
2025-11-04 20:33 ` [PATCH v5 5/5] arm64: dts: imx8ulp: Add rpmsg node under imx_rproc Shenwei Wang
2025-11-05  1:12 ` [PATCH v5 0/5] Enable Remote GPIO over RPMSG on i.MX Platform Peng Fan
2025-11-05 10:25   ` Arnaud POULIQUEN
2025-11-05 14:12     ` Shenwei Wang
2025-11-06 10:17       ` Arnaud POULIQUEN
2025-11-06 16:26         ` Shenwei Wang
2025-11-07 17:17           ` Arnaud POULIQUEN
2025-11-07 17:27             ` Andrew Lunn
2025-11-07 22:40             ` Shenwei Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251104203315.85706-3-shenwei.wang@nxp.com \
    --to=shenwei.wang@nxp.com \
    --cc=andersson@kernel.org \
    --cc=brgl@bgdev.pl \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=peng.fan@nxp.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).