[PATCH v5 3/5] docs: staging: gpio-rpmsg: gpio over rpmsg bus

[Shenwei Wang <shenwei.wang@nxp.com>]

Describes the gpio rpmsg transport protocol over the rpmsg bus between
the cores.

Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
 Documentation/staging/gpio-rpmsg.rst | 202 +++++++++++++++++++++++++++
 Documentation/staging/index.rst      |   1 +
 2 files changed, 203 insertions(+)
 create mode 100644 Documentation/staging/gpio-rpmsg.rst

diff --git a/Documentation/staging/gpio-rpmsg.rst b/Documentation/staging/gpio-rpmsg.rst
new file mode 100644
index 000000000000..ad6207a3093f
--- /dev/null
+++ b/Documentation/staging/gpio-rpmsg.rst
@@ -0,0 +1,202 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+GPIO RPMSG Protocol
+===================
+
+The GPIO RPMSG transport protocol is used for communication and interaction
+with GPIO controllers located on remote cores on the RPMSG bus.
+
+Message Format
+--------------
+
+The RPMSG message consists of a 14-byte packet with the following layout:
+
+.. code-block:: none
+
+   +-----+------+------+-----+-----+------------+-----+-----+-----+----+
+   |0x00 |0x01  |0x02  |0x03 |0x04 |0x05..0x09  |0x0A |0x0B |0x0C |0x0D|
+   |cate |major |minor |type |cmd  |reserved[5] |line |port |  data    |
+   +-----+------+------+-----+-----+------------+-----+-----+-----+----+
+
+- **Cate (Category field)**: Indicates the category of the message, such as GPIO, I2C, PMIC, AUDIO, etc.
+
+  Defined categories:
+
+  - 1: RPMSG_LIFECYCLE
+  - 2: RPMSG_PMIC
+  - 3: RPMSG_AUDIO
+  - 4: RPMSG_KEY
+  - 5: RPMSG_GPIO
+  - 6: RPMSG_RTC
+  - 7: RPMSG_SENSOR
+  - 8: RPMSG_AUTO
+  - 9: RPMSG_CATEGORY
+  - A: RPMSG_PWM
+  - B: RPMSG_UART
+
+- **Major**: Major version number.
+
+- **Minor**: Minor version number.
+
+- **Type (Message Type)**: For the GPIO category, can be one of:
+
+  - 0: GPIO_RPMSG_SETUP
+  - 1: GPIO_RPMSG_REPLY
+  - 2: GPIO_RPMSG_NOTIFY
+
+- **Cmd**: Command code, used for GPIO_RPMSG_SETUP messages.
+
+- **reserved[5]**: Reserved bytes.
+
+- **line**: The GPIO line index.
+
+- **port**: The GPIO controller index.
+
+GPIO Commands
+-------------
+
+Commands are specified in the **Cmd** field for **GPIO_RPMSG_SETUP** (Type=0) messages.
+
+GPIO_RPMSG_INPUT_INIT (Cmd=0)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+**Request:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 0   | 0   |  0        |line |port | val | wk |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+- **val**: Interrupt trigger type.
+
+  - 0: Interrupt disabled
+  - 1: Rising edge trigger
+  - 2: Falling edge trigger
+  - 3: Both edge trigger
+  - 4: Low level trigger
+  - 5: High level trigger
+
+- **wk**: Wakeup enable.
+
+  - 0: Disable wakeup from GPIO
+  - 1: Enable wakeup from GPIO
+
+**Reply:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 1   | 1   |  0        |line |port | err | 0  |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+- **err**: Error code from the remote core.
+
+  - 0: Success
+  - 1: General error (early remote software only returns this unclassified error)
+  - 2: Not supported
+  - 3: Resource not available
+  - 4: Resource busy
+  - 5: Parameter error
+
+GPIO_RPMSG_OUTPUT_INIT (Cmd=1)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+**Request:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 0   | 1   |  0        |line |port | val | 0  |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+- **val**: Output level.
+
+  - 0: Low
+  - 1: High
+
+**Reply:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 1   | 1   |  0        |line |port | err | 0  |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+- **err**: See above for definitions.
+
+GPIO_RPMSG_INPUT_GET (Cmd=2)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+**Request:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 0   | 2   |  0        |line |port | 0   | 0  |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+**Reply:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+-----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D |
+   | 5   | 1   | 0   | 1   | 2   |  0        |line |port | err |level|
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+-----+
+
+- **err**: See above for definitions.
+
+- **level**: Input level.
+
+  - 0: Low
+  - 1: High
+
+GPIO_RPMSG_GET_DIRECTION (Cmd=3)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+**Request:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 0   | 3   |  0        |line |port | 0   | 0  |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+**Reply:**
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+-----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D |
+   | 5   | 1   | 0   | 1   | 3   |  0        |line |port | err | dir |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+-----+
+
+- **err**: See above for definitions.
+
+- **dir**: Direction.
+
+  - 0: Output
+  - 1: Input
+
+Notification Message
+--------------------
+
+Notifications are sent with **Type=2 (GPIO_RPMSG_NOTIFY)**:
+
+.. code-block:: none
+
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+   |0x00 |0x01 |0x02 |0x03 |0x04 |0x05..0x09 |0x0A |0x0B |0x0C |0x0D|
+   | 5   | 1   | 0   | 2   | 0   |  0        |line |port | 0   | 0  |
+   +-----+-----+-----+-----+-----+-----------+-----+-----+-----+----+
+
+- **line**: The GPIO line index.
+- **port**: The GPIO controller index.
+
diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst
index 77bae5e5328b..fbb212e26007 100644
--- a/Documentation/staging/index.rst
+++ b/Documentation/staging/index.rst
@@ -7,6 +7,7 @@ Unsorted Documentation
    :maxdepth: 2
 
    crc32
+   gpio-rpmsg
    lzo
    magic-number
    remoteproc
-- 
2.43.0