[PATCH v2 5/6] dt-bindings: iio: adc: adi,ad7380: add spi-buses property

[David Lechner <dlechner@baylibre.com>]

Add spi-buses property to describe how many SDO lines are wired up on
the ADC. These chips are simultaneous sampling ADCs and have one SDO
line per channel, either 2 or 4 total depending on the part number.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 .../devicetree/bindings/iio/adc/adi,ad7380.yaml    | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index b91bfb16ed6bc6c605880f81050250d1ed9c307a..9ef46cdb047d45d088e0fbc345f58c5b09083385 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -62,6 +62,10 @@ properties:
   spi-cpol: true
   spi-cpha: true
 
+  spi-data-buses:
+    minItems: 1
+    maxItems: 4
+
   vcc-supply:
     description: A 3V to 3.6V supply that powers the chip.
 
@@ -245,6 +249,22 @@ allOf:
       patternProperties:
         "^channel@[0-3]$": false
 
+  # 2-channel chip can only have up to 2 buses
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380
+            - adi,ad7381
+            - adi,ad7386
+            - adi,ad7387
+            - adi,ad7388
+            - adi,ad7389
+    then:
+      properties:
+        spi-data-buses:
+          maxItems: 2
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -260,6 +280,7 @@ examples:
             spi-cpol;
             spi-cpha;
             spi-max-frequency = <80000000>;
+            spi-data-buses = <0>, <1>;
 
             interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
             interrupt-parent = <&gpio0>;
@@ -284,6 +305,7 @@ examples:
             spi-cpol;
             spi-cpha;
             spi-max-frequency = <80000000>;
+            spi-data-buses = <0>, <1>, <2>, <3>;
 
             interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
             interrupt-parent = <&gpio0>;

-- 
2.43.0