From: hans.zhang@cixtech.com
To: bhelgaas@google.com, helgaas@kernel.org, lpieralisi@kernel.org,
kw@linux.com, mani@kernel.org, robh@kernel.org,
kwilczynski@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: mpillai@cadence.com, fugang.duan@cixtech.com,
guoyin.chen@cixtech.com, peter.chen@cixtech.com,
cix-kernel-upstream@cixtech.com, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Hans Zhang <hans.zhang@cixtech.com>
Subject: [PATCH v11 10/10] arm64: dts: cix: Enable PCIe on the Orion O6 board
Date: Sat, 8 Nov 2025 22:03:05 +0800 [thread overview]
Message-ID: <20251108140305.1120117-11-hans.zhang@cixtech.com> (raw)
In-Reply-To: <20251108140305.1120117-1-hans.zhang@cixtech.com>
From: Hans Zhang <hans.zhang@cixtech.com>
Add PCIe RC support on Orion O6 board.
The Orion O6 board includes multiple PCIe root complexes. The current
device tree configuration enables detection and basic operation of PCIe
endpoints on this platform.
GPIO and pinctrl subsystems for this platform are not yet ready for
upstream inclusion. Consequently, attributes such as reset-gpios and
pinctrl configurations are temporarily omitted from the PCIe node
definitions.
Endpoint detection and functionality are confirmed to be operational with
this basic configuration. The missing GPIO and pinctrl support will be
added incrementally in future patches as the dependent subsystems become
available upstream.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
---
Dear Krzysztof and Mani,
Due to the fact that the GPIO, PINCTRL and other modules of our platform are
not yet ready for upstream. Attributes that PCIe depends on, such as reset-gpios
and pinctrl*, have not been added for the time being. It will be added gradually
in the future.
The following are Arnd's previous comments. We can go to upsteam separately.
https://lore.kernel.org/all/422deb4d-db29-48c1-b0c9-7915951df500@app.fastmail.com/
The following are the situations of five PCIe controller enumeration devices.
root@cix-localhost:~# uname -a
Linux cix-localhost 6.18.0-rc4-00010-g0f5b0f23abef #237 SMP PREEMPT Sat Nov 8 21:47:44 CST 2025 aarch64 GNU/Linux
root@cix-localhost:~#
root@cix-localhost:~# lspci
0000:c0:00.0 PCI bridge: Device 1f6c:0001
0000:c1:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8126 (rev 01)
0001:90:00.0 PCI bridge: Device 1f6c:0001
0001:91:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller S4LV008[Pascal]
0002:60:00.0 PCI bridge: Device 1f6c:0001
0002:61:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8852BE PCIe 802.11ax Wireless Network Controller
0003:00:00.0 PCI bridge: Device 1f6c:0001
0003:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8126 (rev 01)
0004:30:00.0 PCI bridge: Device 1f6c:0001
0004:31:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8126 (rev 01)
---
arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
index d74964d53c3b..be3ec4f5d11e 100644
--- a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -34,6 +34,26 @@ linux,cma {
};
+&pcie_x8_rc {
+ status = "okay";
+};
+
+&pcie_x4_rc {
+ status = "okay";
+};
+
+&pcie_x2_rc {
+ status = "okay";
+};
+
+&pcie_x1_0_rc {
+ status = "okay";
+};
+
+&pcie_x1_1_rc {
+ status = "okay";
+};
+
&uart2 {
status = "okay";
};
--
2.49.0
prev parent reply other threads:[~2025-11-08 14:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-08 14:02 [PATCH v11 00/10] Enhance the PCIe controller driver for next generation controllers hans.zhang
2025-11-08 14:02 ` [PATCH v11 01/10] PCI: cadence: Add module support for platform controller driver hans.zhang
2025-11-08 14:02 ` [PATCH v11 02/10] PCI: cadence: Split PCIe controller header file hans.zhang
2025-11-08 14:02 ` [PATCH v11 03/10] PCI: cadence: Move PCIe RP common functions to a separate file hans.zhang
2025-11-09 13:59 ` kernel test robot
2025-11-09 17:01 ` Manivannan Sadhasivam
2025-11-10 1:25 ` Hans Zhang
2025-11-08 14:02 ` [PATCH v11 04/10] PCI: cadence: Add support for High Perf Architecture (HPA) controller hans.zhang
2025-11-08 14:03 ` [PATCH v11 05/10] dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings hans.zhang
2025-11-08 14:03 ` [PATCH v11 06/10] PCI: Add Cix Technology Vendor and Device ID hans.zhang
2025-11-08 14:03 ` [PATCH v11 07/10] PCI: sky1: Add PCIe host support for CIX Sky1 hans.zhang
2025-11-08 14:03 ` [PATCH v11 08/10] MAINTAINERS: add entry for CIX Sky1 PCIe driver hans.zhang
2025-11-08 14:03 ` [PATCH v11 09/10] arm64: dts: cix: Add PCIe Root Complex on sky1 hans.zhang
2025-11-08 14:03 ` hans.zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251108140305.1120117-11-hans.zhang@cixtech.com \
--to=hans.zhang@cixtech.com \
--cc=bhelgaas@google.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fugang.duan@cixtech.com \
--cc=guoyin.chen@cixtech.com \
--cc=helgaas@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mpillai@cadence.com \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).