devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rishikesh Donadkar <r-donadkar@ti.com>
To: <jai.luthra@linux.dev>, <laurent.pinchart@ideasonboard.com>,
	<mripard@kernel.org>
Cc: <r-donadkar@ti.com>, <y-abhilashchandra@ti.com>,
	<devarsht@ti.com>, <s-jain1@ti.com>, <vigneshr@ti.com>,
	<mchehab@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
	<p.zabel@pengutronix.de>, <conor+dt@kernel.org>,
	<sakari.ailus@linux.intel.com>, <hverkuil-cisco@xs4all.nl>,
	<tomi.valkeinen@ideasonboard.com>, <jai.luthra@ideasonboard.com>,
	<changhuang.liang@starfivetech.com>, <jack.zhu@starfivetech.com>,
	<sjoerd@collabora.com>, <dan.carpenter@linaro.org>,
	<hverkuil+cisco@kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v8 01/18] media: ti: j721e-csi2rx: Remove word size alignment on frame width
Date: Wed, 12 Nov 2025 17:24:42 +0530	[thread overview]
Message-ID: <20251112115459.2479225-2-r-donadkar@ti.com> (raw)
In-Reply-To: <20251112115459.2479225-1-r-donadkar@ti.com>

j721e-csi2rx driver has a limitation of frame width being a multiple
word size. However, there is no such limitation imposed by the
hardware [1].

Remove this limitation from the driver.

Link: https://www.ti.com/lit/pdf/spruj16
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
---
 .../platform/ti/j721e-csi2rx/j721e-csi2rx.c   | 24 ++++---------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index b75aa363d1bf2..710d05a053539 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -43,7 +43,6 @@
 #define SHIM_PSI_CFG0_DST_TAG		GENMASK(31, 16)
 
 #define TI_CSI2RX_MAX_PIX_PER_CLK	4
-#define PSIL_WORD_SIZE_BYTES		16
 /*
  * There are no hard limits on the width or height. The DMA engine can handle
  * all sizes. The max width and height are arbitrary numbers for this driver.
@@ -250,19 +249,12 @@ static void ti_csi2rx_fill_fmt(const struct ti_csi2rx_fmt *csi_fmt,
 			       struct v4l2_format *v4l2_fmt)
 {
 	struct v4l2_pix_format *pix = &v4l2_fmt->fmt.pix;
-	unsigned int pixels_in_word;
-
-	pixels_in_word = PSIL_WORD_SIZE_BYTES * 8 / csi_fmt->bpp;
 
 	/* Clamp width and height to sensible maximums (16K x 16K) */
 	pix->width = clamp_t(unsigned int, pix->width,
-			     pixels_in_word,
-			     MAX_WIDTH_BYTES * 8 / csi_fmt->bpp);
+			     1, MAX_WIDTH_BYTES * 8 / csi_fmt->bpp);
 	pix->height = clamp_t(unsigned int, pix->height, 1, MAX_HEIGHT_LINES);
 
-	/* Width should be a multiple of transfer word-size */
-	pix->width = rounddown(pix->width, pixels_in_word);
-
 	v4l2_fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	pix->pixelformat = csi_fmt->fourcc;
 	pix->bytesperline = pix->width * (csi_fmt->bpp / 8);
@@ -360,23 +352,15 @@ static int ti_csi2rx_enum_framesizes(struct file *file, void *fh,
 				     struct v4l2_frmsizeenum *fsize)
 {
 	const struct ti_csi2rx_fmt *fmt;
-	unsigned int pixels_in_word;
 
 	fmt = find_format_by_fourcc(fsize->pixel_format);
 	if (!fmt || fsize->index != 0)
 		return -EINVAL;
 
-	/*
-	 * Number of pixels in one PSI-L word. The transfer happens in multiples
-	 * of PSI-L word sizes.
-	 */
-	pixels_in_word = PSIL_WORD_SIZE_BYTES * 8 / fmt->bpp;
-
 	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-	fsize->stepwise.min_width = pixels_in_word;
-	fsize->stepwise.max_width = rounddown(MAX_WIDTH_BYTES * 8 / fmt->bpp,
-					      pixels_in_word);
-	fsize->stepwise.step_width = pixels_in_word;
+	fsize->stepwise.min_width = 1;
+	fsize->stepwise.max_width = MAX_WIDTH_BYTES * 8 / fmt->bpp;
+	fsize->stepwise.step_width = 1;
 	fsize->stepwise.min_height = 1;
 	fsize->stepwise.max_height = MAX_HEIGHT_LINES;
 	fsize->stepwise.step_height = 1;
-- 
2.34.1


  reply	other threads:[~2025-11-12 11:55 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-12 11:54 [PATCH v8 00/18] media: cadence,ti: CSI2RX Multistream Support Rishikesh Donadkar
2025-11-12 11:54 ` Rishikesh Donadkar [this message]
2025-11-20 11:58   ` [PATCH v8 01/18] media: ti: j721e-csi2rx: Remove word size alignment on frame width Tomi Valkeinen
2025-11-12 11:54 ` [PATCH v8 02/18] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 03/18] media: ti: j721e-csi2rx: separate out device and context Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 04/18] media: ti: j721e-csi2rx: prepare SHIM code for multiple contexts Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 05/18] media: ti: j721e-csi2rx: allocate DMA channel based on context index Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 06/18] media: ti: j721e-csi2rx: add a subdev for the core device Rishikesh Donadkar
2025-11-20 12:39   ` Sakari Ailus
2025-11-21  6:59     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 07/18] media: cadence: csi2rx: Move to .enable/disable_streams API Rishikesh Donadkar
2025-11-20 13:00   ` Tomi Valkeinen
2025-11-21  7:02     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 08/18] media: ti: j721e-csi2rx: " Rishikesh Donadkar
2025-11-20 12:40   ` Sakari Ailus
2025-11-21  7:04     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 09/18] media: ti: j721e-csi2rx: get number of contexts from device tree Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 10/18] media: cadence: csi2rx: add get_frame_desc wrapper Rishikesh Donadkar
2025-11-20 12:40   ` Tomi Valkeinen
2025-12-02  9:03     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 11/18] media: ti: j721e-csi2rx: add support for processing virtual channels Rishikesh Donadkar
2025-11-20 12:32   ` Tomi Valkeinen
2025-12-01  9:25     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 12/18] media: cadence: csi2rx: add multistream support Rishikesh Donadkar
2025-11-20 12:53   ` Sakari Ailus
2025-12-09  9:43     ` Rishikesh Donadkar
2025-11-20 13:14   ` Tomi Valkeinen
2025-12-09  9:45     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 13/18] media: ti: j721e-csi2rx: " Rishikesh Donadkar
2025-12-01 13:03   ` Tomi Valkeinen
2025-12-09 10:08     ` Rishikesh Donadkar
2025-12-09 10:36       ` Jai Luthra
2025-12-09 11:52         ` Tomi Valkeinen
2025-12-09 12:06           ` Jai Luthra
2025-11-12 11:54 ` [PATCH v8 14/18] media: ti: j721e-csi2rx: Submit all available buffers Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 15/18] media: ti: j721e-csi2rx: Change the drain architecture for multistream Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 16/18] media: cadence: csi2rx: Support runtime PM Rishikesh Donadkar
2025-12-01 13:11   ` Tomi Valkeinen
2025-11-12 11:54 ` [PATCH v8 17/18] media: ti: j721e-csi2rx: Support runtime suspend Rishikesh Donadkar
2025-11-20 13:16   ` Sakari Ailus
2025-12-08  7:47     ` Jai Luthra
2025-12-08  9:39       ` Sakari Ailus
2025-12-01 13:22   ` Tomi Valkeinen
2025-12-08  7:36     ` Jai Luthra
2025-11-12 11:54 ` [PATCH v8 18/18] media: ti: j721e-csi2rx: Support system suspend using pm_notifier Rishikesh Donadkar
2025-12-01 13:46   ` Tomi Valkeinen
2025-12-08  8:01     ` Jai Luthra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251112115459.2479225-2-r-donadkar@ti.com \
    --to=r-donadkar@ti.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=dan.carpenter@linaro.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jack.zhu@starfivetech.com \
    --cc=jai.luthra@ideasonboard.com \
    --cc=jai.luthra@linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s-jain1@ti.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sjoerd@collabora.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=vigneshr@ti.com \
    --cc=y-abhilashchandra@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).