[PATCH v2 2/3] dt-bindings: regulator: Add Fitipower FP9931/JD9930

[Andreas Kemnade <andreas@kemnade.info>]

Document the FP9931/JD9930. As the FP9931 is a clear subset of the JD9930,
define it as a fallback compatible. GPIO names are same as in the datasheet
except for the EN pad which is described as "enable".

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 .../bindings/regulator/fitipower,fp9931.yaml       | 110 +++++++++++++++++++++
 1 file changed, 110 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml b/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml
new file mode 100644
index 000000000000..28802e4518c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fitipower,fp9931.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FitiPower FP9931/JD9930 Power Management Integrated Circuit
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  FP9931 is a Power Management IC to provide Power for EPDs with one 3.3V
+  switch, 2 symmetric LDOs behind 2 DC/DC converters, and one unsymmetric
+  regulator for a compensation voltage.
+  JD9930 has in addition some kind of night mode.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fitipower,fp9931
+
+      - items:
+          - const: fitipower,jd9930
+          - const: fitipower,fp9931
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  pg-gpios:
+    maxItems: 1
+
+  en-ts-gpios:
+    maxItems: 1
+
+  xon-gpios:
+    maxItems: 1
+
+  vin-supply:
+    description:
+      Supply for the whole chip. Some vendor kernels and devicetrees
+      declare this as a non-existing GPIO named "pwrall".
+
+  fitipower,tdly-ms:
+    description:
+      Power up soft start delay settings tDLY1-4 bitfields in the
+      POWERON_DELAY register
+    items:
+      - enum: [0, 1, 2, 4]
+      - enum: [0, 1, 2, 4]
+      - enum: [0, 1, 2, 4]
+      - enum: [0, 1, 2, 4]
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(vcom|vposneg|v3p3)$":
+        unevaluatedProperties: false
+        type: object
+        $ref: /schemas/regulator/regulator.yaml
+
+required:
+  - compatible
+  - reg
+  - pg-gpios
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@18 {
+          compatible = "fitipower,fp9931";
+          reg = <0x18>;
+          pinctrl-names = "default";
+          pinctrl-0 = <&pinctrl_fp9931_gpio>;
+          vin-supply = <&epd_pmic_supply>;
+          pg-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+          en-ts-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+          enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+          fitipower,tdly-ms = <2 2 4 4>;
+
+          regulators {
+            vcom {
+              regulator-name = "vcom";
+              regulator-min-microvolt = <2352840>;
+              regulator-max-microvolt = <2352840>;
+            };
+
+            vposneg {
+              regulator-name = "vposneg";
+              regulator-min-microvolt = <15060000>;
+              regulator-max-microvolt = <15060000>;
+            };
+
+            v3p3 {
+              regulator-name = "v3p3";
+            };
+          };
+        };
+    };

-- 
2.47.3