From: Vincent Guittot <vincent.guittot@linaro.org>
To: chester62515@gmail.com, mbrugger@suse.com,
ghennadi.procopciuc@oss.nxp.com, s32@nxp.com,
bhelgaas@google.com, jingoohan1@gmail.com, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, Ionut.Vicovan@nxp.com,
larisa.grigore@nxp.com, Ghennadi.Procopciuc@nxp.com,
ciprianmarian.costea@nxp.com, bogdan.hamciuc@nxp.com,
Frank.li@nxp.com, linux-arm-kernel@lists.infradead.org,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev
Cc: cassel@kernel.org
Subject: [PATCH 1/4 v5] dt-bindings: PCI: s32g: Add NXP PCIe controller
Date: Tue, 18 Nov 2025 17:02:35 +0100 [thread overview]
Message-ID: <20251118160238.26265-2-vincent.guittot@linaro.org> (raw)
In-Reply-To: <20251118160238.26265-1-vincent.guittot@linaro.org>
Describe the PCIe host controller available on the S32G platforms.
Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
---
.../bindings/pci/nxp,s32g-pcie.yaml | 130 ++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
new file mode 100644
index 000000000000..da3106dfcf58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nxp,s32g-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2xxx/S32G3xxx PCIe Root Complex controller
+
+maintainers:
+ - Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
+ - Ionut Vicovan <ionut.vicovan@nxp.com>
+
+description:
+ This PCIe controller is based on the Synopsys DesignWare PCIe IP.
+ The S32G SoC family has two PCIe controllers, which can be configured as
+ either Root Complex or Endpoint.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nxp,s32g2-pcie
+ - items:
+ - const: nxp,s32g3-pcie
+ - const: nxp,s32g2-pcie
+
+ reg:
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: dbi2
+ - const: atu
+ - const: dma
+ - const: ctrl
+ - const: config
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: msi
+ - const: dma
+ minItems: 1
+
+ pcie@0:
+ description:
+ Describe the S32G Root Port.
+ type: object
+ $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ required:
+ - reg
+ - phys
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - ranges
+ - pcie@0
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@40400000 {
+ compatible = "nxp,s32g3-pcie", "nxp,s32g2-pcie";
+ reg = <0x00 0x40400000 0x0 0x00001000>, /* dbi registers */
+ <0x00 0x40420000 0x0 0x00001000>, /* dbi2 registers */
+ <0x00 0x40460000 0x0 0x00001000>, /* atu registers */
+ <0x00 0x40470000 0x0 0x00001000>, /* dma registers */
+ <0x00 0x40481000 0x0 0x000000f8>, /* ctrl registers */
+ <0x5f 0xffffe000 0x0 0x00002000>; /* config space */
+ reg-names = "dbi", "dbi2", "atu", "dma", "ctrl", "config";
+ dma-coherent;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges =
+ <0x81000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>,
+ <0x82000000 0x0 0x00000000 0x58 0x00000000 0x0 0x80000000>,
+ <0x82000000 0x1 0x00000000 0x59 0x00000000 0x6 0xfffe0000>;
+
+ bus-range = <0x0 0xff>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "dma";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ device_type = "pci";
+ phys = <&serdes0 PHY_TYPE_PCIE 0 0>;
+ };
+ };
+ };
--
2.43.0
next prev parent reply other threads:[~2025-11-18 16:02 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-18 16:02 [PATCH 0/4 v5] PCI: s32g: Add support for PCIe controller Vincent Guittot
2025-11-18 16:02 ` Vincent Guittot [this message]
2025-11-18 16:52 ` [PATCH 1/4 v5] dt-bindings: PCI: s32g: Add NXP " Frank Li
2025-11-20 11:27 ` Manivannan Sadhasivam
2025-11-20 15:23 ` Rob Herring (Arm)
2025-11-18 16:02 ` [PATCH 2/4 v5] PCI: dw: Add more registers and bitfield definition Vincent Guittot
2025-11-18 16:54 ` Frank Li
2025-11-18 16:02 ` [PATCH 3/4 v5] PCI: s32g: Add initial PCIe support (RC) Vincent Guittot
2025-11-18 17:01 ` Frank Li
2025-11-20 7:25 ` Vincent Guittot
2025-11-20 8:22 ` Manivannan Sadhasivam
2025-11-20 9:06 ` Vincent Guittot
2025-11-20 10:25 ` Manivannan Sadhasivam
2025-11-20 17:57 ` Vincent Guittot
2025-11-18 16:02 ` [PATCH 4/4 v5] MAINTAINERS: Add MAINTAINER for NXP S32G PCIe driver Vincent Guittot
2025-11-26 19:42 ` Ghennadi Procopciuc
2025-11-26 20:17 ` Ciprian Marian Costea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251118160238.26265-2-vincent.guittot@linaro.org \
--to=vincent.guittot@linaro.org \
--cc=Frank.li@nxp.com \
--cc=Ghennadi.Procopciuc@nxp.com \
--cc=Ionut.Vicovan@nxp.com \
--cc=bhelgaas@google.com \
--cc=bogdan.hamciuc@nxp.com \
--cc=cassel@kernel.org \
--cc=chester62515@gmail.com \
--cc=ciprianmarian.costea@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ghennadi.procopciuc@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=jingoohan1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=larisa.grigore@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mbrugger@suse.com \
--cc=robh@kernel.org \
--cc=s32@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).