[PATCH 0/3] Add support for exynos5250-samsung-nexus10-manta (Google Nexus 10)

[PATCH 0/3] Add support for exynos5250-samsung-nexus10-manta (Google Nexus 10)

[Lukas Timmermann]

This patch series adds initial support for the samsung-manta board, known
as Google Nexus 10 to users. The device is powered by
the Exynos 5250 SoC. The notification led driver (as3668) is already 
in the kernel mailing list and can be found here:
https://lore.kernel.org/linux-leds/20251117020008.316648-1-linux@timmermann.space/

The first two patches add the necessary device tree files and
bindings, while the last patch makes a small modification to
allow CPU1 to boot, as it requires a call to it's underlying firmware.

This first iteration only provides basic support to get the board
up and running and usable via UART. We will upstream additional 
features in future patches. All patches have been tested on real hardware.

Signed-off-by: Lukas Timmermann <linux@timmermann.space>

Alexandre Marquet (3):
  dt-bindings: ARM: samsung: Add Samsung Manta (Google Nexus 10)
  ARM: dts: exynos: Add Samsung Manta (Google Nexus 10)
  ARM: samsung: exynos5250: Allow CPU1 to boot

 .../bindings/arm/samsung/samsung-boards.yaml  |   1 +
 arch/arm/boot/dts/samsung/Makefile            |   1 +
 .../exynos5250-samsung-nexus10-manta.dts      | 516 ++++++++++++++++++
 arch/arm/mach-exynos/firmware.c               |   4 +-
 4 files changed, 520 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/samsung/exynos5250-samsung-nexus10-manta.dts

-- 
2.52.0