From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] MIPS: dts: Always descend vendor subdirectories
Date: Thu, 20 Nov 2025 14:47:16 -0600 [thread overview]
Message-ID: <20251120204717.1982418-1-robh@kernel.org> (raw)
Commit 41528ba6afe6 ("MIPS: DTS: Only build subdir of current platform")
broke building of all DTBs when CONFIG_OF_ALL_DTBS is enabled unless all
the various kconfig options were also enabled. The only effect that commit
had was getting rid of some harmless build lines such as:
AR arch/mips/boot/dts/mti/built-in.a
Those lines were part of the built-in DTB support. Since commit
04e4ec98e405 ("MIPS: migrate to generic rule for built-in DTBs"), how the
built-in DTBs are handled has changed and those lines are no longer
generated, so revert to the prior behavior.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/mips/boot/dts/Makefile | 35 +++++++++++++----------------
arch/mips/boot/dts/realtek/Makefile | 4 ++--
2 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 6d9dbe945541..36c5e4c6e640 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,20 +1,17 @@
# SPDX-License-Identifier: GPL-2.0
-subdir-$(CONFIG_BMIPS_GENERIC) += brcm
-subdir-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon
-subdir-$(CONFIG_ECONET) += econet
-subdir-$(CONFIG_EYEQ) += mobileye
-subdir-$(CONFIG_FIT_IMAGE_FDT_MARDUK) += img
-subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img
-subdir-$(CONFIG_MACH_INGENIC) += ingenic
-subdir-$(CONFIG_LANTIQ) += lantiq
-subdir-$(CONFIG_MACH_LOONGSON64) += loongson
-subdir-$(CONFIG_MACH_LOONGSON32) += loongson
-subdir-$(CONFIG_SOC_VCOREIII) += mscc
-subdir-$(CONFIG_MIPS_MALTA) += mti
-subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
-subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
-subdir-$(CONFIG_MACH_PIC32) += pic32
-subdir-$(CONFIG_ATH79) += qca
-subdir-$(CONFIG_RALINK) += ralink
-subdir-$(CONFIG_MACH_REALTEK_RTL) += realtek
-subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += xilfpga
+subdir-y += brcm
+subdir-y += cavium-octeon
+subdir-y += econet
+subdir-y += mobileye
+subdir-y += img
+subdir-y += ingenic
+subdir-y += lantiq
+subdir-y += loongson
+subdir-y += mscc
+subdir-y += mti
+subdir-y += ni
+subdir-y += pic32
+subdir-y += qca
+subdir-y += ralink
+subdir-y += realtek
+subdir-y += xilfpga
diff --git a/arch/mips/boot/dts/realtek/Makefile b/arch/mips/boot/dts/realtek/Makefile
index d2709798763f..3ac795d85236 100644
--- a/arch/mips/boot/dts/realtek/Makefile
+++ b/arch/mips/boot/dts/realtek/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-y += cisco_sg220-26.dtb
-dtb-y += cameo-rtl9302c-2x-rtl8224-2xge.dtb
+dtb-$(CONFIG_MACH_REALTEK_RTL) += cisco_sg220-26.dtb
+dtb-$(CONFIG_MACH_REALTEK_RTL) += cameo-rtl9302c-2x-rtl8224-2xge.dtb
--
2.51.0
next reply other threads:[~2025-11-20 20:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-20 20:47 Rob Herring (Arm) [this message]
2025-12-01 9:42 ` [PATCH] MIPS: dts: Always descend vendor subdirectories Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251120204717.1982418-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).