From: Hal Feng <hal.feng@starfivetech.com>
To: "Conor Dooley" <conor+dt@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Paul Walmsley" <pjw@kernel.org>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
"Heinrich Schuchardt" <heinrich.schuchardt@canonical.com>,
"E Shattow" <e@freeshell.de>
Cc: Hal Feng <hal.feng@starfivetech.com>,
devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 5/6] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
Date: Tue, 25 Nov 2025 15:56:03 +0800 [thread overview]
Message-ID: <20251125075604.69370-6-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251125075604.69370-1-hal.feng@starfivetech.com>
VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI
VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/Makefile | 1 +
.../jh7110-starfive-visionfive-2-lite.dts | 20 +++++++++++++++++++
2 files changed, 21 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 62b659f89ba7..2b1e7fcd6f84 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -13,5 +13,6 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts
new file mode 100644
index 000000000000..b96eea4fa7d5
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2-lite.dtsi"
+
+/ {
+ model = "StarFive VisionFive 2 Lite";
+ compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+ disable-wp;
+ cap-sd-highspeed;
+};
--
2.43.2
next prev parent reply other threads:[~2025-11-25 12:32 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-25 7:55 [PATCH v4 0/6] Add support for StarFive VisionFive 2 Lite board Hal Feng
2025-11-25 7:55 ` [PATCH v4 1/6] PCI: starfive: Use regulator APIs instead of GPIO APIs to enable the 3V3 power supply of PCIe slots Hal Feng
2025-11-25 20:00 ` Conor Dooley
2025-12-06 12:37 ` Matthias Brugger
2025-12-01 6:45 ` Hal Feng
2025-12-01 20:52 ` Bjorn Helgaas
2025-12-02 1:45 ` 回复: " Kevin Xie
2025-12-02 3:02 ` Kevin Xie
2025-12-02 3:16 ` Kevin Xie
2025-12-02 16:31 ` Bjorn Helgaas
2025-12-04 13:19 ` Hal Feng
2025-12-02 3:38 ` Hal Feng
2025-11-25 7:56 ` [PATCH v4 2/6] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-11-25 7:56 ` [PATCH v4 3/6] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts Hal Feng
2025-11-25 7:56 ` [PATCH v4 4/6] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants Hal Feng
2025-12-04 17:05 ` Anand Moon
2025-12-05 7:23 ` Maud Spierings
2025-12-05 7:30 ` E Shattow
2025-12-05 7:41 ` Hal Feng
2025-12-05 8:01 ` Anand Moon
2025-11-25 7:56 ` Hal Feng [this message]
2025-11-26 1:44 ` [PATCH v4 5/6] riscv: dts: starfive: Add VisionFive 2 Lite board device tree E Shattow
2025-11-25 7:56 ` [PATCH v4 6/6] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng
2025-11-26 1:45 ` E Shattow
2025-11-25 22:24 ` (subset) [PATCH v4 0/6] Add support for StarFive VisionFive 2 Lite board Conor Dooley
2025-12-19 8:09 ` patchwork-bot+linux-riscv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251125075604.69370-6-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=e@freeshell.de \
--cc=emil.renner.berthing@canonical.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).